Effects of Co-Solvents on the Performance of PEDOT:PSS Films and Hybrid Photovoltaic Devices

Hybrid silicon solar cells have been fabricated by the spin coating of conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a p-type contact on textured n-type crystalline silicon wafers. The effect of adding co-solvents, ethylene glycol (EG) and dimethyl sulphoxide (DMSO), to PEDOT:PSS improves its conductivity which translates to the improved performance of solar cells. Transfer length measurements were conducted to realize optimal contact with minimal losses between the front metal contact (silver) and PEDOT:PSS. From the conductivity and device results, a 7% EG with 0.25 wt% Triton (surfactant) blend of PEDOT:PSS is found to be optimal for these cells. This current approach with a few changes in the device architecture will pave way for the further improvement of PEDOT:PSS based hybrid silicon solar cells.

[1]  W. Lövenich,et al.  Organic-silicon Solar Cells Exceeding 20% Efficiency , 2015 .

[2]  K. Leung,et al.  High-efficiency hybrid solar cells by nanostructural modification in PEDOT:PSS with co-solvent addition , 2014 .

[3]  Bo E. Tew,et al.  Growth and characterization of TbAs films , 2016 .

[4]  Jae Hoon Jung,et al.  Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents , 2002 .

[5]  W. Lövenich,et al.  PEDOT: Principles and Applications of an Intrinsically Conductive Polymer , 2010 .

[6]  James H. Hack,et al.  Hybrid Organic-Inorganic Solar Cells with a Benzoquinone Passivating Layer , 2017, 2017 IEEE 44th Photovoltaic Specialist Conference (PVSC).

[7]  C. Voz,et al.  PEDOT:PSS as an Alternative Hole Selective Contact for ITO-Free Hybrid Crystalline Silicon Solar Cell , 2016, IEEE Journal of Photovoltaics.

[8]  K. Leung,et al.  Defect‐Minimized PEDOT:PSS/Planar‐Si Solar Cell with Very High Efficiency , 2014 .

[9]  S. Christiansen,et al.  The Role of Hole Transport in Hybrid Inorganic/Organic Silicon/Poly(3,4-ethylenedioxy-thiophene):Poly(styrenesulfonate) Heterojunction Solar Cells , 2013 .

[10]  S. Roth,et al.  Molecular Reorientation and Structural Changes in Cosolvent-Treated Highly Conductive PEDOT:PSS Electrodes for Flexible Indium Tin Oxide-Free Organic Electronics , 2014 .

[11]  K. Leung,et al.  Mixed co-solvent engineering of PEDOT:PSS to enhance its conductivity and hybrid solar cell properties , 2016 .

[12]  A. Pron,et al.  Electrochemical oxidation of poly(3,4-ethylenedioxythiophene) — “in situ” conductivity and spectroscopic investigations , 2000 .

[13]  A. Alsayed,et al.  Highly Conductive Poly(3,4‐ethylenedioxythiophene):Poly (styrenesulfonate) Films Using 1‐Ethyl‐3‐methylimidazolium Tetracyanoborate Ionic Liquid , 2012 .