In situ solid-state NMR spectroscopy of electrochemical cells: batteries, supercapacitors, and fuel cells.

Electrochemical cells, in the form of batteries (or supercapacitors) and fuel cells, are efficient devices for energy storage and conversion. These devices show considerable promise for use in portable and static devices to power electronics and various modes of transport and to produce and store electricity both locally and on the grid. For example, high power and energy density lithium-ion batteries are being developed for use in hybrid electric vehicles where they improve the efficiency of fuel use and help to reduce greenhouse gas emissions. To gain insight into the chemical reactions involving the multiple components (electrodes, electrolytes, interfaces) in the electrochemical cells and to determine how cells operate and how they fail, researchers ideally should employ techniques that allow real-time characterization of the behavior of the cells under operating conditions. This Account reviews the recent use of in situ solid-state NMR spectroscopy, a technique that probes local structure and dynamics, to study these devices. In situ NMR studies of lithium-ion batteries are performed on the entire battery, by using a coin cell design, a flat sealed plastic bag, or a cylindrical cell. The battery is placed inside the NMR coil, leads are connected to a potentiostat, and the NMR spectra are recorded as a function of state of charge. (7)Li is used for many of these experiments because of its high sensitivity, straightforward spectral interpretation, and relevance to these devices. For example, (7)Li spectroscopy was used to detect intermediates formed during electrochemical cycling such as LixC and LiySiz species in batteries with carbon and silicon anodes, respectively. It was also used to observe and quantify the formation and growth of metallic lithium microstructures, which can cause short circuits and battery failure. This approach can be utilized to identify conditions that promote dendrite formation and whether different electrolytes and additives can help prevent dendrite formation. The in situ method was also applied to monitor (by (11)B NMR) electrochemical double-layer formation in supercapacitors in real time. Though this method is useful, it comes with challenges. The separation of the contributions from the different cell components in the NMR spectra is not trivial because of overlapping resonances. In addition, orientation-dependent NMR interactions, including the spatial- and orientation-dependent bulk magnetic susceptibility (BMS) effects, can lead to resonance broadening. Efforts to understand and mitigate these BMS effects are discussed in this Account. The in situ NMR investigation of fuel cells initially focused on the surface electrochemistry at the electrodes and the electrochemical oxidation of methanol and CO to CO2 on the Pt cathode. On the basis of the (13)C and (195)Pt NMR spectra of the adsorbates and electrodes, CO adsorbed on Pt and other reaction intermediates and complete oxidation products were detected and their mode of binding to the electrodes investigated. Appropriate design and engineering of the NMR hardware has allowed researchers to integrate intact direct methanol fuel cells into NMR probes. Chemical transformations of the circulating methanol could be followed and reaction intermediates could be detected in real time by either (2)H or (13)C NMR spectroscopy. By use of the in situ NMR approach, factors that control fuel cell performance, such as methanol cross over and catalyst performance, were identified.

[1]  J. Rouzaud,et al.  The first in situ 7Li NMR study of the reversible lithium insertion mechanism in disorganised carbons , 2004 .

[2]  E. Oldfield,et al.  Exploring electrochemical interfaces with solid-state NMR. , 1998, Analytical Chemistry.

[3]  François Béguin,et al.  In situ 7Li-nuclear magnetic resonance observation of reversible lithium insertion into disordered carbons , 2003 .

[4]  C. Grey,et al.  Real-time NMR studies of electrochemical double-layer capacitors. , 2011, Journal of the American Chemical Society.

[5]  O. Han Nuclear magnetic resonance investigations on electrochemical reactions of low temperature fuel cells operating in acidic conditions. , 2013, Progress in nuclear magnetic resonance spectroscopy.

[6]  Hailong Chen,et al.  In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries. , 2010, Nature materials.

[7]  Alexej Jerschow,et al.  7Li MRI of Li batteries reveals location of microstructural lithium. , 2012, Nature materials.

[8]  E. Cairns,et al.  Quantitative Solid-State NMR Spectra of CO Adsorbed from Aqueous Solution onto a Commercial Electrode , 1996 .

[9]  François Béguin,et al.  The first in situ 7Li nuclear magnetic resonance study of lithium insertion in hard-carbon anode materials for Li-ion batteries , 2003 .

[10]  F. Chevallier,et al.  In situ 7Li NMR during lithium electrochemical insertion into graphite and a carbon/carbon composite , 2006 .

[11]  K. Han,et al.  Observation of methanol behavior in fuel cells in situ by NMR spectroscopy. , 2012, Angewandte Chemie.

[12]  Yixian Wang,et al.  Lithium‐7 Nuclear Magnetic Resonance Investigation of Lithium Insertion in Hard Carbon , 1998 .

[13]  C. Grey,et al.  NMR studies of cathode materials for lithium-ion rechargeable batteries. , 2004, Chemical reviews.

[14]  K. Kramarz,et al.  Toroids in NMR Spectroscopy , 1997 .

[15]  E. Oldfield,et al.  Cyclic voltammetry and 195Pt nuclear magnetic resonance characterization of graphite-supported commercial fuel cell grade platinum electrocatalysts , 1998 .

[16]  C. Grey,et al.  Paramagnetic electrodes and bulk magnetic susceptibility effects in the in situ NMR studies of batteries: application to Li1.08Mn1.92O4 spinels. , 2013, Journal of magnetic resonance.

[17]  Jean-Marie Tarascon,et al.  Performance of Bellcore's plastic rechargeable Li-ion batteries , 1996 .

[18]  A. Wiȩckowski,et al.  Probing Adsorbates on Pt Electrode Surfaces by the Use of 13C Spin‐Echo NMR Studies of Generated from Methanol Electrosorption , 1990 .

[19]  F. Chevallier,et al.  In situ 7Li nuclear magnetic resonance observation of the electrochemical intercalation of lithium in graphite; 1st cycle , 2007 .

[20]  E. Oldfield,et al.  Nuclear Magnetic Resonance Spectroscopic Study of the Electrochemical Oxidation Product of Methanol on Platinum Black , 1996 .

[21]  C. Grey,et al.  In situ NMR of lithium ion batteries: bulk susceptibility effects and practical considerations. , 2012, Solid state nuclear magnetic resonance.

[22]  A. Wiȩckowski,et al.  Interfacing Surface Electrochemistry with Solid-State NMR. Characterization of Surface CO on Polycrystalline Platinum , 1993 .

[23]  E. Wachsman,et al.  Lowering the Temperature of Solid Oxide Fuel Cells , 2011, Science.

[24]  Kirk W Feindel,et al.  In situ observations of water production and distribution in an operating H2/O2 PEM fuel cell assembly using 1H NMR microscopy. , 2004, Journal of the American Chemical Society.

[25]  E. Oldfield,et al.  First Observation of Platinum-195 Nuclear Magnetic Resonance in Commercial Graphite-Supported Platinum Electrodes in an Electrochemical Environment , 1997 .

[26]  E. Cairns,et al.  Nuclear Magnetic Resonance and Voltammetry Studies of Carbon Monoxide Adsorption and Oxidation on a Carbon-Supported Platinum Fuel Cell Electrocatalyst , 2001 .

[27]  Rangeet Bhattacharyya,et al.  Real-time NMR investigations of structural changes in silicon electrodes for lithium-ion batteries. , 2009, Journal of the American Chemical Society.

[28]  Christopher S. Johnson,et al.  In situ nuclear magnetic resonance investigations of lithium ions in carbon electrode materials using a novel detector , 2001 .

[29]  S. Wasmus,et al.  Methanol oxidation and direct methanol fuel cells: a selective review 1 In honour of Professor W. Vi , 1999 .

[30]  Y. Gogotsi,et al.  Materials for electrochemical capacitors. , 2008, Nature materials.

[31]  G. Goward,et al.  Quadrupolar NMR of Ionic Conductors, Batteries, and Other Energy‐related Materials , 2011 .

[32]  Laure Monconduit,et al.  New cell design for in-situ NMR studies of lithium-ion batteries , 2011 .

[33]  Seong-Soo Kim,et al.  Methanol behavior in direct methanol fuel cells. , 2008, Angewandte Chemie.

[34]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[35]  Christopher S. Johnson,et al.  7Li NMR study of intercalated lithium in curved carbon lattices , 2000 .

[36]  A. Wiȩckowski,et al.  Electrode potential dependent NMR spectra of surface 13CO on polycrystalline platinum , 1992 .

[37]  J. Klink,et al.  Local metal to non-metal transition on oxygen-covered platinum particles from 195Pt nuclear magnetic resonance , 1995 .

[38]  E. Oldfield,et al.  NMR of Electrocatalysts , 2002 .

[39]  E. Oldfield,et al.  Recent progress in surface NMR-electrochemistry , 1997 .