Gapped smoothing algorithm applied to defect identification using pulsed thermography

On the basis of pulsed thermography, this article presents the development of a quantitative detection method for sub-surface defects. A two dimensional gapped smoothing algorithm (GSA) applied in this method to process the surface thermal distribution and no reference information is needed. A new thermal contrast is defined and a damage index based on the thermal contrast is proposed to estimate the probability of location of a defect, and differential curves of thermal contrast are applied for further quantification of defect size. One aluminium plate and one glass fibre reinforced composite laminate containing different depths of flat-bottom holes, delaminations and impurities are introduced to assess the performance of proposed method. Numerical and experimental results indicate that the influence of non-uniform heating is clearly suppressed. Compared with the differentiated absolute contrast approach, distinct enhancement of thermal contrast is achieved, and the location and size of sub-surface instances of damage can be quantitatively determined using the proposed method. The relation of damage index and flaw depth is investigated and a general expression is presented for the evaluation of flaw depth. The influence of the distribution density of the gapped grid on detection accuracy is further discussed. The proposed method, which is less dependent on the capture time, can be used for automatic detection and characterisation of defects. The reliability and applicability of the GSA applied to pulsed thermography are verified.

[1]  Lichun Feng,et al.  Specified value based defect depth prediction using pulsed thermography , 2012 .

[2]  Humberto Loaiza Correa,et al.  New 3D Finite Difference Method for Thermal Contrast Enhancement in Slabs Pulsed Thermography Inspection , 2013 .

[3]  Wang Yang,et al.  Experimental study on active infrared thermography as a NDI tool for carbon–carbon composites , 2013 .

[4]  Richard E. Martin,et al.  Interpreting the results of pulsed thermography data , 2003 .

[5]  Xavier Maldague,et al.  Qualitative and quantitative assessment of aerospace structures by pulsed thermography , 2007 .

[6]  Xavier Maldague,et al.  Improved method for absolute thermal contrast evaluation using Source Distribution Image (SDI) , 2010 .

[7]  Vladimir P. Vavilov,et al.  Evaluating the efficiency of data processing algorithms in transient thermal NDT , 2004, SPIE Defense + Commercial Sensing.

[8]  Darryl P Almond,et al.  Defect sizing by transient thermography. I. An analytical treatment , 1994 .

[9]  Jiangang Sun,et al.  Analysis of data processing methods for pulsed thermal imaging characterisation of delaminations , 2013 .

[10]  Kara Peters,et al.  Through-the-thickness identification of impact damage in composite laminates through pulsed phase thermography , 2013 .

[11]  Daniel L. Balageas,et al.  Defense and illustration of time-resolved pulsed thermography for NDE , 2011, Defense + Commercial Sensing.

[12]  Jan Holnicki-Szulc,et al.  Detecting delamination zones in composites by embedded electrical grid and thermographic methods , 2011 .

[13]  Ermanno G. Grinzato,et al.  Methodology of processing experimental data in transient thermal nondestructive testing (NDT) , 1995, Defense, Security, and Sensing.

[14]  Kozo Saito,et al.  IR self-referencing thermography for detection of in-depth defects , 2005 .

[15]  P. Venegas,et al.  Automatic detection of impact damage in carbon fiber composites using active thermography , 2013 .

[16]  Andrés David Restrepo Girón,et al.  NON-UNIFORM HEATING COMPENSATION FOR SEQUENCES OF THERMAL IMAGES USING MEDIAN FILTERING , 2013 .

[17]  V. P. Vavilov,et al.  Pulsed thermal NDT of materials: back to the basics , 2007 .

[18]  I. H. Marshall,et al.  Thermography as a tool for damage assessment , 2005 .

[19]  Yi Zhou,et al.  A combined approach of self-referencing and Principle Component Thermography for transient, steady, and selective heating scenarios , 2010 .

[20]  A. Bendada,et al.  Comparative Study of Active Thermography Techniques for the Nondestructive Evaluation of Honeycomb Structures , 2009 .

[21]  S. Marinetti,et al.  IR thermographic detection and characterization of hidden corrosion in metals: General analysis , 2010 .

[22]  Xavier Maldague,et al.  Pulsed phase thermography reviewed , 2004 .

[23]  R. C. Mcmaster.  Nondestructive testing handbook , 1959 .

[24]  D. Almond,et al.  Transient thermography in the assessment of defects of aircraft composites , 2003 .

[25]  Xavier Maldague,et al.  Definition of a new thermal contrast and pulse correction for defect quantification in pulsed thermography , 2008 .

[26]  S. Marinetti,et al.  Pulse phase infrared thermography , 1996 .

[27]  K. K. Lee,et al.  A study of full-field debond behaviour and durability of CFRP-concrete composite beams by pulsed infrared thermography (IRT) , 2012 .

[28]  Colin P. Ratcliffe,et al.  Local damage detection using the two-dimensional gapped smoothing method , 2005 .

[29]  Steven M. Shepard,et al.  Non-destructive testing of structural composites and adhesively bonded composite joints: pulsed thermography , 2002 .

[30]  X. Maldague,et al.  New absolute contrast for pulsed thermography , 2002 .

[31]  Bruce A. Rubadeux,et al.  Reconstruction and enhancement of active thermographic image sequences , 2003 .

[32]  C. Ratcliffe.  DAMAGE DETECTION USING A MODIFIED LAPLACIAN OPERATOR ON MODE SHAPE DATA , 1997 .

[33]  A. Fahr,et al.  Numerical modeling for thermographic inspection of fiber metal laminates , 2009 .

[34]  Impact damage characterisation of thermoplastic matrix composites using transmission transient thermography , 2003 .

[35]  S. S. Law,et al.  Damage localization in plate structures from uniform load surface curvature , 2004 .

[36]  Chun H. Wang,et al.  The strong diamagnetic characteristics of unidirectional carbon fiber reinforced polymer laminates , 2012 .

[37]  Xavier Maldague,et al.  Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .