Effects of Inlet Distortion on Aeromechanical Stability of a Forward-Swept High-Speed Fan

Concerns regarding noise, propulsive efficiency, and fuel burn are inspiring aircraft designs wherein the propulsive turbomachines are partially (or fully) embedded within the airframe; such designs present serious concerns with regard to aerodynamic and aeromechanic performance of the compression system in response to inlet distortion. Separately, a forward-swept high-speed fan was developed to address noise concerns of modern podded turbofans; however this fan encounters aeroelastic instability (flutter) as it approaches stall. A three-dimensional, unsteady, Navier-Stokes computational fluid dynamics code is applied to analyze and corroborate fan performance with clean inlet flow. This code, already validated in its application to assess aerodynamic damping of vibrating blades at various flow conditions, is modified and then applied in a computational study to preliminarily assess the effects of inlet distortion on aeroelastic stability of this forwardswept high-speed fan. Computational engineering application and implementation issues are discussed, followed by an investigation into the aeroelastic behavior of the fan with clean and distorted inlets.

[1]  K. K. Hassan,et al.  Experimental and Numerical Study of Stall Flutter in a Transonic Low-Aspect Ratio Fan Blisk , 2004 .

[2]  Melissa B. Carter,et al.  High Reynolds Number Investigation of a Flush-Mounted, S-Duct Inlet with Large Amounts of Boundary Layer Ingestion , 2013 .

[3]  R. H. Liebeck,et al.  Design of the Blended Wing Body Subsonic Transport , 2002 .

[4]  R. Abhari,et al.  Unsteady CFD Investigation on Inlet Distortion in a Centrifugal Compressor , 2008 .

[5]  J. P. Chen,et al.  A Parallel Flow Solver for Unsteady Multiple Blade Row Turbomachinery Simulations , 2001 .

[6]  David L. Whitfield,et al.  Navier-Stokes calculations for the unsteady flowfield of turbomachinery , 1993 .

[7]  Pericles Pilidis,et al.  Axial compressor response to inlet flow distortions by a CFD analysis , 2004 .

[8]  Hidekazu Kodama,et al.  Unsteady three-dimensional analysis of inlet distortion in turbomachinery , 1997 .

[9]  Theo G. Keith,et al.  Calculation and Correlation of the Unsteady Flowfield in a High Pressure Turbine , 2002 .

[10]  Leroy H. Smith.  Wake ingestion propulsion benefit , 1993 .

[11]  Jen‐Ping Chen,et al.  Comparison of time-accurate calculations for the unsteady interaction in turbomachinery stage , 1998 .

[12]  Abdulnaser I. Sayma,et al.  An Integrated Time-Domain Aeroelasticity Model for the Prediction of Fan Forced Response due to Inlet Distortion , 2002 .

[13]  C. Hah,et al.  Effects of Inlet Distortion on the Flow Field in a Transonic Compressor Rotor , 1998 .

[14]  Theo G. Keith,et al.  Numerical Simulation of Aerodynamic Damping for Flutter Analysis of Turbomachinery Blade Rows , 2003 .

[15]  Theo G. Keith,et al.  Flutter Analysis of a Transonic Fan , 2002 .

[17]  A. J. Sanders,et al.  Nonsynchronous Vibration (NSV) due to a Flow-Induced Aerodynamic Instability in a Composite Fan Stator , 2005 .

[18]  Steven E. Gorrell,et al.  High Fidelity URANS Analysis of Swirl Generation and Fan Response to Inlet Distortion , 2008 .

[19]  Tom Hynes,et al.  Performance of a Boundary Layer Ingesting (BLI) propulsion system , 2007 .

[20]  Michael D. Hathaway,et al.  Pre-Stall Behavior of a Transonic Axial Compressor Stage Via Time-Accurate Numerical Simulation , 2013 .

[21]  Steven E. Gorrell,et al.  A Time-Accurate CFD Analysis of Inlet Distortion Induced Swirl in Multistage Fans , 2007 .