Micro-TiO2 as a starting material for new photocatalytic tiles

Abstract New industrially produced photocatalytic tiles provide not only good photocatalytic performance, but also meet standard requirements with respect to hardness, lack of porosity, vitrified surface, durability. These characteristics were obtained mixing the photocatalytic materials with a commercial SiO2-based compound conventionally used to create vitrified surfaces. In the preparation, a commercial micro-TiO2 was used to avoid the use of traditional nanomaterials in powder form. Anatase form is maintained even after thermal treatments at 680 °C, as confirmed by both band gap and XRPD measurements on the final material. Photocatalytic degradation tests performed in water and air using methylene blue and NOx as a model pollutant, respectively, confirm the good performance of the tiles in both liquid and gas phase.

[1]  Graeme Hodge,et al.  A Small Matter of Regulation: An International Review of Nanotechnology Regulation , 2006 .

[2]  Eun-Kyung Ahn,et al.  Nanoparticulate-induced toxicity and related mechanism in vitro and in vivo , 2009 .

[3]  C. Bianchi,et al.  New Surface Properties in Porcelain Gres Tiles with a Look to Human and Environmental Safety , 2012 .

[4]  C. Howard,et al.  Structural and thermal parameters for rutile and anatase , 1991 .

[5]  C. Poon,et al.  Hydration and properties of nano-TiO2 blended cement composites , 2012 .

[6]  A. Jephcoat,et al.  A correction for powder diffraction peak asymmetry due to axial divergence , 1994 .

[7]  S. Gialanella,et al.  Tailored Anatase/Brookite Nanocrystalline TiO2. The Optimal Particle Features for Liquid- and Gas-Phase Photocatalytic Reactions , 2007 .

[8]  A. Fitch,et al.  The High Resolution Powder Diffraction Beam Line at ESRF , 1996, Journal of research of the National Institute of Standards and Technology.

[9]  A. Bard,et al.  IMPROVED PHOTOCATALYTIC ACTIVITY AND CHARACTERIZATION OF MIXED TIO2/SIO2 AND TIO2/AL2O3 MATERIALS , 1997 .

[10]  V. Colvin.  The potential environmental impact of engineered nanomaterials , 2003, Nature Biotechnology.

[11]  S. Gialanella,et al.  N-doped TiO2 from TiCl3 for photodegradation of air pollutants , 2009 .

[12]  Colin L. Raston,et al.  Green chemistry and the health implications of nanoparticles , 2006 .

[13]  Robert H Schiestl,et al.  Titanium dioxide nanoparticles induce DNA damage and genetic instability in vivo in mice. , 2009, Cancer research.

[14]  Brian H. Toby,et al.  EXPGUI, a graphical user interface for GSAS , 2001 .

[15]  Jun Lin,et al.  Origin of Photocatalytic Deactivation of TiO2 Film Coated on Ceramic Substrate , 2007 .

[16]  Jun Chen,et al.  Photocatalytic cementitious materials: influence of the microstructure of cement paste on photocatalytic pollution degradation. , 2009, Environmental science & technology.

[17]  Jerome B. Hastings,et al.  Rietveld refinement of Debye–Scherrer synchrotron X‐ray data from Al2O3 , 1987 .