Stable LSM/LSTM bi-layer interconnect for flat-tubular solid oxide fuel cells

[1]  Hongtan Liu,et al.  An analytical model for solid oxide fuel cells with bi-layer electrolyte , 2013 .

[2]  Hailei Zhao,et al.  Electrical conductivity and cell performance of La0.3Sr0.7Ti1−xCrxO3−δ perovskite oxides used as anode and interconnect material for SOFCs , 2013 .

[3]  R. Song,et al.  Fabrication and characterization of a dual layer ceramic interconnect on a porous NiO-YSZ anode support , 2012 .

[4]  Q. Ma,et al.  Comparison of Y and La-substituted SrTiO3 as the anode materials for SOFCs , 2012 .

[5]  Jong‐Won Lee,et al.  A flat-tubular solid oxide fuel cell with a dense interconnect film coated on the porous anode support , 2012 .

[6]  J. Chung,et al.  Preparation and evaluation of Ca3−xBixCo4O9−δ (0< x ≤ 0.5) as novel cathodes for intermediate temperature-solid oxide fuel cells , 2012 .

[7]  T. Graule,et al.  Synthesis and performance of A-site deficient lanthanum-doped strontium titanate by nanoparticle based spray pyrolysis , 2012 .

[8]  Jong‐Won Lee,et al.  La-doped SrTiO3 interconnect materials for anode-supported flat-tubular solid oxide fuel cells , 2012 .

[9]  Z. Wen,et al.  Performance of an anode-supported tubular solid oxide fuel cells stack with two single cells connect , 2011 .

[10]  Z. Wen,et al.  A novel bilayered Sr0.6La0.4TiO3/La0.8Sr0.2MnO3 interconnector for anode-supported tubular solid oxide fuel cell via slurry-brushing and co-sintering process , 2011 .

[11]  Xingbo Liu,et al.  Recent Development of SOFC Metallic Interconnect , 2010 .

[12]  A. Virkar,et al.  Measurement of oxygen chemical potential in Gd2O3-doped ceria-Y2O3-stabilized zirconia bi-layer electrolyte, anode-supported solid oxide fuel cells , 2009 .

[13]  M. Mogensen,et al.  Conductivity of SrTiO3 based oxides in the reducing atmosphere at high temperature , 2007 .

[14]  E. Wachsman,et al.  Stable and high conductivity ceria/bismuth oxide bilayer electrolytes for lower temperature solid oxide fuel cells , 2006 .

[15]  F. Tietz,et al.  La0.4Sr0.6Ti1 − x Mn x O3 − δ Perovskites as Anode Materials for Solid Oxide Fuel Cells , 2006 .

[16]  Srikanth Gopalan,et al.  Bi-layer structures as solid oxide fuel cell interconnections , 2006 .

[17]  J. Fergus.  Metallic interconnects for solid oxide fuel cells , 2005 .

[18]  R. Gorte,et al.  Direct hydrocarbon solid oxide fuel cells. , 2004, Chemical reviews.

[19]  J. Fergus.  Lanthanum chromite-based materials for solid oxide fuel cell interconnects , 2004 .

[20]  Mogens Bjerg Mogensen,et al.  Conversion of Hydrocarbons in Solid Oxide Fuel Cells , 2003 .

[21]  S. Deevi,et al.  Development of interconnect materials for solid oxide fuel cells , 2003 .

[22]  J. Stevenson,et al.  Thermal, Electrical, and Electrocatalytical Properties of Lanthanum-Doped Strontium Titanate , 2002 .

[23]  I. Yasuda,et al.  Electrical Conductivity and Chemical Diffusion Coefficient of Strontium-Doped Lanthanum Manganites , 1996 .

[24]  I. Yasuda,et al.  Electrical Conductivity and Defect Structure of Calcium‐Doped Lanthanum Chromites , 1993 .

[25]  T. M. Gür,et al.  Oxygen chemical diffusion in strontium doped lanthanum manganites , 1992 .

[26]  N. Sakai,et al.  Chemical Thermodynamic Considerations in Sintering of LaCrO3 ‐ Based Perovskites , 1991 .