Freeform fabrication of Ti–Al alloys by 3D micro-welding

Abstract 3D micro-welding (3DMW) is a newly developed rapid prototyping method for metals. It combines a micro-tungsten inert gas (TIG) welding with a layered manufacturing method. A tip of a thin metal wire is melted by a micro-TIG welder to form a small metal bead. By building up metal beads layer by layer under computer control, a 3D metal object is eventually formed. A wide variety of metals and alloys can be used. The Ti–Al based intermetallic alloys have superior mechanical and chemical properties. However, the forming process is difficult and costly. We have tried to fabricate 3D objects of the Ti–Al alloy system by using several thin Ti and Al wires. Some simple objects with a unique microstructure or graded composition are demonstrated.

[1]  S. Suryanarayana,et al.  Thermal expansion characteristics of Ti3Al and the effect of additives , 1989 .

[2]  E. Collings,et al.  Materials Properties Handbook: Titanium Alloys , 1994 .

[3]  Zhou Tian-rui,et al.  Generation and optimization of slice profile data in rapid prototyping and manufacturing , 2007 .

[4]  Li Lu,et al.  Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts , 2001 .

[5]  Soshu Kirihara,et al.  Freeform fabrication of Ti–Ni and Ti–Fe intermetallic alloys by 3D Micro Welding , 2007 .

[6]  Yaodong Liu,et al.  Mechanical alloying and spark plasma sintering of the intermetallic compound Ti50Al50 , 2007 .

[7]  K. Ishida,et al.  Phase equilibria in the Ti–Al binary system , 2000 .

[8]  M. Palm,et al.  Reassessment of the binary Aluminum-Titanium phase diagram , 2006 .

[9]  Kai Zhang,et al.  Research on the processing experiments of laser metal deposition shaping , 2007 .

[10]  David L. Bourell,et al.  Direct laser freeform fabrication of high performance metal components , 1998 .

[11]  Soshu Kirihara,et al.  Development of Freeform Fabrication of Metals by Three Diminsional Micro-Welding , 2007 .

[12]  J. Zollinger,et al.  Influence of oxygen on solidification behaviour of cast TiAl-based alloys , 2007 .

[13]  R Kovacevic,et al.  Rapid prototyping based on variable polarity gas tungsten arc welding for a 5356 aluminium alloy , 2001 .

[14]  Soshu Kirihara,et al.  Freeform fabrication of titanium metal by 3D micro welding , 2005 .