Novel approach for diagnosis and detection of broken bar in induction motor at low slip using fuzzy logic
暂无分享,去创建一个
W. Laala | S. Guedini | S. Zouzou | S. Zouzou | W. Laala | S. Guedini
[1] W. T. Thomson,et al. Current signature analysis to detect induction motor faults , 2001 .
[2] H. Henao,et al. Diagnosis of Broken Bar Fault in Induction Machines Using Discrete Wavelet Transform without Slip Estimation , 2007, 2007 IEEE Industry Applications Annual Meeting.
[3] Demba Diallo,et al. A Fuzzy-Based Approach for the Diagnosis of Fault Modes in a Voltage-Fed PWM Inverter Induction Motor Drive , 2008, IEEE Transactions on Industrial Electronics.
[4] W. Laala,et al. A Fuzzy Logic Approach for the Diagnosis of Rotor Faults in Squirrel Cage Induction Motors , 2009, 2009 Second International Conference on Computer and Electrical Engineering.
[5] Xiaolong Zhang,et al. Rotor cage fault diagnosis in induction motors based on spectral analysis of current Hilbert modulus , 2004, IEEE Power Engineering Society General Meeting, 2004..
[6] Mohamed El Hachemi Benbouzid. A review of induction motors signature analysis as a medium for faults detection , 2000, IEEE Trans. Ind. Electron..
[7] A. Nuttall,et al. On the quadrature approximation to the Hilbert transform of modulated signals , 1966 .
[8] R. Puche-Panadero,et al. Improved Resolution of the MCSA Method Via Hilbert Transform, Enabling the Diagnosis of Rotor Asymmetries at Very Low Slip , 2009, IEEE Transactions on Energy Conversion.
[9] Arindam Ghosh,et al. Detection of incipient faults in single phase induction motors using fuzzy logic , 1998, Power Quality '98.
[10] Gerald Burt Kliman,et al. Methods of Motor Current Signature Analysis , 1992 .
[11] Mohamed Benbouzid,et al. A simple fuzzy logic approach for induction motors stator condition monitoring , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).
[12] P. Tse,et al. A comparison study of improved Hilbert–Huang transform and wavelet transform: Application to fault diagnosis for rolling bearing , 2005 .