Analytical Modeling of Surface Roughness, Hardness and Residual Stress Induced by Deep Rolling

[1]  Raviraj Shetty,et al.  Analysis of surface roughness and hardness in ball burnishing of titanium alloy , 2014 .

[2]  Wassila Bouzid,et al.  Analytical modeling of surface profile in turning and burnishing , 2014 .

[3]  Zheng Qiang Tang,et al.  Analytical prediction and experimental verification of surface roughness during the burnishing process , 2012 .

[4]  Aitzol Lamikiz,et al.  Surface improvement of shafts by the deep ball-burnishing technique , 2012 .

[5]  Zhenyu Xue,et al.  Correlation between the flow stress and the nominal indentation hardness of soft metals , 2008 .

[6]  S. Qiang,et al.  New formula relating the yield stress-strain with the strength coefficient and the strain-hardening exponent , 2004 .

[7]  Wassila Bouzid,et al.  An investigation of surface roughness of burnished AISI 1042 steel , 2003 .

[8]  David B. Dooner,et al.  Mechanical Design of Machine Elements and Machines: A Failure Prevention Perspective , 2002 .

[9]  Subra Suresh,et al.  A new method for estimating residual stresses by instrumented sharp indentation , 1998 .

[10]  Leon Kukielka,et al.  Designating the field areas for the contact of a rotary burnishing element with the rough surface of a part, providing a high-quality product , 1989 .

[11]  N. H. Loh,et al.  Effects of ball burnishing parameters on surface finish—A literature survey and discussion , 1988 .

[12]  J. Cohen,et al.  Residual Stress: Measurement by Diffraction and Interpretation , 1987 .

[13]  G. Berstein,et al.  Festwalzen und Schwingfestigkeit , 1982 .

[14]  Qiang Sun,et al.  New formula relating the yield stress-strain with the strength coefficient and the strain-hardening exponent , 2004 .

[15]  H. Hertz.  Ueber die Berührung fester elastischer Körper. , 1882 .

[16]  Hertz.  On the Contact of Elastic Solids , 1882 .