In wind turbines with bend-twist adaptive blades there is an interaction between the induced twist due to elastic coupling and the blade loading as the source load of induced twist. This interaction makes the simulation of these types of wind turbines a coupled aero-structure process that needs an internal correction loop. In each run of the correction loop a finite element analysis of the blade is necessary to find the induced twist and this makes the simulation process very time consuming and cumbersome. On the other hand, in wind turbines with stretchtwist adaptive blades the centrifugal force, as the source load, produces the induced twist but it is not affected by the induced twist directly. Therefore, a single-step simulation can be carried out with no need for a correction loop. A single step simulation is more time efficient than a coupled aero-structure one. This study compares the results of simulations of a modelled wind turbine with bend-twist adaptive blades both by a single step approach and by a coupled aero-structure approach. In this way the question of how accurate can be a single step simulation of a wind turbine with bend-twist adaptive blades, can be answered. Comparison of the results shows that even for small amounts of induced twist and low wind velocities a single step simulation approach gives unrealistic results and cannot be used for simulation of a wind turbine with bend-twist adaptive blades.
[1]
Alireza Maheri,et al.
WTAB, a computer program for predicting the performance of horizontal axis wind turbines with adaptive blades
,
2006
.
[2]
Gunjit Bir,et al.
The Use of Twist-Coupled Blades to Enhance the Performance of Horizontal Axis Wind Turbines
,
2001
.
[3]
Paul S. Veers,et al.
Parameter Optimization Applied toUse ofAdaptive Blades on aVariable Speed WindTurbine
,
1999
.
[4]
Cheng-Huat Ong,et al.
Design, Manufacture and Testing of A Bend-Twist D-Spar
,
1999
.
[5]
James E. Locke,et al.
The Implementation of Braided Composite Materials in the Design of a Bend-Twist Coupled Blade
,
2002
.
[6]
Don W. Lobitz,et al.
Load mitigation with twist-coupled HAWT blades
,
1999
.
[7]
James E. Locke,et al.
Design Studies for Twist-Coupled Wind Turbine Blades
,
2003
.
[8]
Cheng-Huat Ong,et al.
The use of carbon fibers in wind turbine blade design: A SERI-8 blade example
,
2000
.
[9]
Paul S. Veers,et al.
Performance of twist-coupled blades on variable speed rotors
,
2000
.