Solar cooker effect test and temperature field simulation of radio telescope subreflector

Abstract The solar cooker effect can cause a local high temperature of the subreflector and can directly affect the working performance of the radio telescope. To study the daily temperature field and solar cooker effect of a subreflector, experimental studies are carried out with a 3-m-diameter radio telescope model for the first time. Initially, the solar temperature distribution rules, especially the solar cooker effect, are summarized according to the field test results under the most unfavorable conditions. Then, a numerical simulation for the solar temperature field of the subreflector is studied by light beam segmentation and tracking methods. Finally, the validity of the simulation methods is evaluated using the test results. The experimental studies prove that the solar cooker effect really exists and should not be overlooked. In addition, simulation methods for the subreflector temperature field proposed in this paper are effective. The research methods and conclusions can provide valuable references for thermal design, monitoring and control of similar high-precision radio telescopes.

[1]  A. Greve,et al.  Performance Improvement of a Flexible Telescope Through Metrology and Active Control , 2009, Proceedings of the IEEE.

[2]  J. W. Findlay.  Radio Telescopes , 1964, IEEE Transactions on Military Electronics.

[3]  Feng Jin,et al.  Practical procedure for predicting non-uniform temperature on the exposed face of arch dams , 2010 .

[4]  Hongbo Liu,et al.  Theoretical and experimental study on the temperature distribution of H-shaped steel members under solar radiation , 2012 .

[5]  Walter Lacarbonara,et al.  A three-dimensional continuum approach to the thermoelastodynamics of large-scale structures , 2012 .

[6]  O. Turgut,et al.  Three dimensional numerical and experimental study of forced convection heat transfer on solar collector surface , 2009 .

[7]  Zhihua Chen,et al.  Studies on the temperature distribution of steel plates with different paints under solar radiation , 2014 .

[8]  A. Greve,et al.  Mechanical Measurements of the ALMA Prototype Antennas , 2008, IEEE Antennas and Propagation Magazine.

[9]  A. I. Borovkov,et al.  Finite-element modeling and thermal analysis of the RT-70 radio telescope main reflector , 2003, 4th International Conference on Antenna Theory and Techniques (Cat. No.03EX699).

[10]  Feng Fan,et al.  An estimate of the time-varying temperature field of the main reflector and subreflector of the Shanghai 65 m radio telescope under solar illumination , 2016 .

[11]  Jingquan Cheng.  The Principles of Astronomical Telescope Design , 2009 .

[12]  Chao Shen,et al.  Modelling and simulation of solar radiation data processing with Simulink , 2008, Simul. Model. Pract. Theory.

[13]  Li Yang,et al.  Performance analysis of a novel sun-tracking CPC heat pipe evacuated tubular collector , 2015 .

[14]  S. P. Chiew,et al.  Design of radio telescope structural frameworks , 1985 .

[15]  Dana S. Balser,et al.  The GBT precision telescope control system , 2004, SPIE Astronomical Telescopes + Instrumentation.

[16]  Ebrahim Hajidavalloo,et al.  Effect of sun radiation on the thermal behavior of distribution transformer , 2010 .

[17]  A. Greve,et al.  Calculated thermal behavior of ventilated high precision radio telescopes , 2006, IEEE Antennas and Propagation Magazine.

[18]  Fan Feng,et al.  Analysis of the Precision of the Structural Performance of the 65 m-Antenna Reflector , 2013 .

[19]  Kimberly H. Chung,et al.  Radome-enclosed antenna's temperature and velocity fields , 2013 .