Influence of Scan Density on the Estimation of Single-Tree Attributes by Hand-Held Mobile Laser Scanning

Nowadays, forest inventories are frequently carried out using a combination of field measurements and remote sensing data, often acquired with light detection and ranging (LiDAR) sensors. Several studies have investigated how three-dimensional laser scanning point clouds from different platforms can be used to acquire information traditionally collected with forest instruments, such as hypsometers and callipers to detect single-tree attributes like tree height and diameter at the breast height. The present study has tested the performances of the ZEB1 instrument, a type of hand-held mobile laser scanner, for single-tree attributes estimation in pure Castanea sativa Mill. stands cultivated for fruit production in Central Italy. In particular, the influence of walking scan path density on single-tree attributes estimation (number of trees, tree position, diameter at breast height, tree height, and crown base height) was investigated to test the efficiency of field measures. The point clouds were acquired by walking along straight lines drawn with different spacing: 10 and 15 m apart. A single-tree scan approach, which included walking with the instrument around each tree, was used as reference data. In order to evaluate the efficiency of the survey, the influence of the walking scan path was discussed in relation to the accuracy of single-tree attributes estimation, as well as the time and cost needed for data acquisition, pre-processing, and analysis. Our results show that the 10 m scan path provided the best results, with an omission error of 6%; the assessment of single-tree attributes was successful, with values of the coefficient of determination and the relative root mean square error similar to other studies. The 10 m scan path has also proved to decrease the costs by about €14 for data pre-processing, and a saving of time for data acquisition and data analysis of about 37 min compared to the reference data.

[1]  Mikko Inkinen,et al.  A segmentation-based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners , 2001, IEEE Trans. Geosci. Remote. Sens..

[2]  Gherardo Chirici,et al.  Comparing echo-based and canopy height model-based metrics for enhancing estimation of forest aboveground biomass in a model-assisted framework , 2016 .

[3]  R. McRoberts,et al.  Estimating and mapping forest structural diversity using airborne laser scanning data , 2015 .

[4]  Emily Williams,et al.  Assessing Handheld Mobile Laser Scanners for Forest Surveys , 2015, Remote. Sens..

[5]  Piermaria Corona,et al.  Classifying silvicultural systems (coppices vs. high forests) in Mediterranean oak forests by Airborne Laser Scanning data , 2014 .

[6]  Sébastien Bauwens,et al.  Forest Inventory with Terrestrial LiDAR: A Comparison of Static and Hand-Held Mobile Laser Scanning , 2016 .

[7]  Hans-Gerd Maas,et al.  Automatic forest inventory parameter determination from terrestrial laser scanner data , 2008 .

[8]  M. Nilsson,et al.  Combining national forest inventory field plots and remote sensing data for forest databases , 2008 .

[9]  Yang Liu,et al.  Automatic Forest Mapping at Individual Tree Levels from Terrestrial Laser Scanning Point Clouds with a Hierarchical Minimum Cut Method , 2016, Remote. Sens..

[10]  J. Holmgren,et al.  Tree Stem Diameter Estimation from Mobile Laser Scanning Using Line-Wise Intensity-Based Clustering , 2016 .

[11]  Gherardo Chirici,et al.  Modeling Mediterranean forest structure using airborne laser scanning data , 2017, Int. J. Appl. Earth Obs. Geoinformation.

[12]  Ville Kankare,et al.  Diameter distribution estimation with laser scanning based multisource single tree inventory , 2015 .

[13]  Pruning methods to restore Castanea sativa stands attacked by Dryocosmus kuriphilus , 2012, New Forests.

[14]  E. Næsset,et al.  Laser scanning of forest resources: the nordic experience , 2004 .

[15]  Michael J. Falkowski,et al.  A review of methods for mapping and prediction of inventory attributes for operational forest management , 2014 .

[16]  A. Barbati,et al.  Contribution of large-scale forest inventories to biodiversity assessment and monitoring , 2011 .

[17]  N. Pfeifer,et al.  Three-dimensional reconstruction of stems for assessment of taper, sweep and lean based on laser scanning of standing trees , 2004 .

[18]  Mikko Kuronen,et al.  Correcting for nondetection in estimating forest characteristics from single-scan terrestrial laser measurements , 2019, Canadian Journal of Forest Research.

[19]  Marek Pierzchała,et al.  Applications of Remote and Proximal Sensing for Improved Precision in Forest Operations , 2017 .

[20]  C. Hopkinson,et al.  Assessing forest metrics with a ground-based scanning lidar , 2004 .

[21]  E. Næsset,et al.  Single Tree Segmentation Using Airborne Laser Scanner Data in a Structurally Heterogeneous Spruce Forest , 2006 .

[22]  M. Fournier,et al.  The use of terrestrial LiDAR technology in forest science: application fields, benefits and challenges , 2011, Annals of Forest Science.

[23]  Juha Hyyppä,et al.  Possibilities of a Personal Laser Scanning System for Forest Mapping and Ecosystem Services , 2014, Sensors.

[24]  Francesca Giannetti,et al.  Comparing Three Different Ground Based Laser Scanning Methods for Tree Stem Detection , 2018, Remote. Sens..

[25]  Michael Bosse,et al.  Efficiently capturing large, complex cultural heritage sites with a handheld mobile 3D laser mapping system , 2014 .

[26]  Juha Hyyppä,et al.  Tree mapping using airborne, terrestrial and mobile laser scanning – A case study in a heterogeneous urban forest , 2013 .

[27]  Michael Bosse,et al.  Zebedee: Design of a Spring-Mounted 3-D Range Sensor with Application to Mobile Mapping , 2012, IEEE Transactions on Robotics.

[28]  E. Næsset,et al.  Comparison of four types of 3D data for timber volume estimation , 2014 .

[29]  E. Marchi,et al.  Assessment of Soil Disturbance Caused by Forest Operations by Means of Portable Laser Scanner and Soil Physical Parameters , 2017 .

[30]  Heinrich Spiecker,et al.  SimpleTree —An Efficient Open Source Tool to Build Tree Models from TLS Clouds , 2015 .

[31]  E. Næsset,et al.  Remote sensing and forest inventories in Nordic countries – roadmap for the future , 2018 .

[32]  Piermaria Corona,et al.  Integrating terrestrial and airborne laser scanning for the assessment of single-tree attributes in Mediterranean forest stands , 2018 .

[33]  Gherardo Chirici,et al.  Statistical inference for forest structural diversity indices using airborne laser scanning data and the k-Nearest Neighbors technique , 2016 .

[34]  Juha Hyyppä,et al.  Automatic Stem Mapping by Merging Several Terrestrial Laser Scans at the Feature and Decision Levels , 2013, Sensors.

[35]  Christopher Gomez,et al.  3D modelling of individual trees using a handheld camera: Accuracy of height, diameter and volume estimates , 2015 .

[36]  Joanne C. White,et al.  The role of LiDAR in sustainable forest management , 2008 .

[37]  M. Vastaranta,et al.  Terrestrial laser scanning in forest inventories , 2016 .