Axial capacity of tapered piles established from model tests

Tapered piles represent a more efficient distribution of pile material than uniform cross section piles in several respects. An extensive experimental research program was conducted to study the efficiency of tapered piles compared with piles of uniform cross section with the same material input. Three instrumented model steel piles with different degrees of taper were used in this program. The piles were tested in a large-scale laboratory setup under compressive and tensile loads. The pile head load and displacement and the strain along the piles were measured simultaneously. The objectives of the present paper were twofold: to examine the validity of the experimental results, and to use the unit load transfer curves established from the experimental results to predict the bearing capacity of prototype tapered piles. The shaft resistance for straight-sided wall piles established from the experimental results compared well with the theoretical predictions using the standard design procedure. The beneficia...