Photoelastic analysis of matrix stresses around a high modulus sapphire fibre by means of phase-stepping automated polariscope

Abstract The matrix stress field has been quantified and the micromechanics of fragmentation of sapphire fibres in an epoxy matrix have been investigated using phase-stepping photoelasticity and fluorescence spectroscopy. Contour maps of the isochromatic fringe order (related to the difference in principal stresses) have been used to describe in detail the changes in matrix stress field during stress transfer in the presence of a matrix crack and interfacial debonding. The profiles of interfacial shear stress at various levels of applied matrix stress indicate clearly the extent of interfacial debonding. The results show that the matrix crack significantly reduces the efficiency of stress transfer at the interface. The frictional shear stress at the debonded interface has been found experimentally to be 3–10 MPa for a sapphire fibre embedded in the LY5052/HY5052 epoxy system. The relationship between interfacial shear stress and axial fibre stress is discussed. The interfacial shear stress profiles obtained from photoelasticity has been compared to that calculated from the axial fibre stress measured by shifts in fluorescence spectral bands.

[1]  Eann A. Patterson,et al.  Measurement of micro stress fields in epoxy matrix around a fibre using phase-stepping automated photoelasticity , 2003 .

[2]  R. Young,et al.  Fragmentation in alumina fibre reinforced epoxy model composites monitored using fluorescence spectroscopy , 1996, Journal of Materials Science.

[3]  G. Holister,et al.  Fibre Reinforced Materials , 1966 .

[4]  H. Wagner,et al.  The use of carbon nanotubes to sense matrix stresses around a single glass fiber , 2001 .

[5]  Y. Mai,et al.  Stress transfer in the fibre fragmentation test: Part III Effect of matrix cracking and interface debonding , 1997 .

[6]  Eann A. Patterson,et al.  Simultaneous observation of phase-stepped images for automated photoelasticity , 1998 .

[7]  Costas Galiotis,et al.  The study of model polydiacetylene/epoxy composites , 1991 .

[8]  W. F. Riley,et al.  Experimental stress analysis , 1978 .

[9]  D. Roylance.  INTRODUCTION TO COMPOSITE MATERIALS , 2000 .

[10]  G. J. Davies,et al.  A photoelastic study of the shear stresses associated with the transfer of stress during fibre reinforcement , 1965 .

[11]  S. Lütze.  Confocal laser scanning photoelasticity: Improvement of precision for quantitative photoelastic studies on model composite materials , 2006 .

[12]  A. Kelly,et al.  Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .

[13]  M. Piggott.  Failure processes in the fibre-polymer interphase , 1991 .

[14]  R. Young,et al.  Determination of residual strains in ceramic-fibre reinforced composites using fluorescence spectroscopy , 1995 .

[15]  K. Schulte,et al.  Photo-elastic analysis of fibre-reinforced model composite materials , 1997 .

[16]  R. Young,et al.  The study of model polydiacetylene/epoxy composites , 1984 .

[17]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[18]  Jang-Kyo Kim,et al.  Interfacial debonding and fibre pull-out stresses , 1992 .

[19]  A. Galeski,et al.  Determination of stresses around beads in stressed epoxy resin by photoelasticity , 2002 .