Evaluating the SWMM LID Editor rain barrel option for the estimation of retention potential of rainwater harvesting systems

Abstract The low-impact development (LID) Editor rain barrel option of release 5.5 of the EPA storm water management model (SWMM) software does not allow the consideration of demand-driven behaviour of domestic rain water harvesting (RWH) systems to evaluate their runoff retention potential. This paper compares the results of the LID Editor with those obtained by a detailed demand-driven tank model scheme – used as a benchmark – and developed using basic functions of SWMM. The comparison showed the LID Editor-based model to generally overestimate the benchmark model in the evaluation of both volumetric and peak retention efficiency. The high variability of the results of the comparison suggests the use of the LID Editor rain barrel option for long-term simulation but not for single event analysis. A sensitivity analysis revealed that the overestimation provided by the rain barrel option is significant for tanks smaller than 2 m3, tank sizes of major diffusion for domestic RWH.

[1]  L. Lanza,et al.  Storm water pollution in the urban environment of Genoa, Italy , 2005 .

[2]  Alberto Campisano,et al.  Appropriate resolution timescale to evaluate water saving and retention potential of rainwater harvesting for toilet flushing in single houses , 2015 .

[3]  Tim D. Fletcher,et al.  The performance of rainwater tanks for stormwater retention and water supply at the household scale: an empirical study , 2015 .

[4]  Alberto Campisano,et al.  Experimental investigation on water saving by the reuse of washbasin grey water for toilet flushing , 2010 .

[5]  F A Memon,et al.  Performance of a large building rainwater harvesting system. , 2012, Water research.

[6]  Steven J. Burian,et al.  Hydrologic modeling analysis of a passive, residential rainwater harvesting program in an urbanized, semi-arid watershed , 2014 .

[7]  E. Marčiulaitienė,et al.  Storm Water Pollution in the Urban Environment of Vilnius, Lithuania , 2014 .

[8]  Vicente Juan Garcia,et al.  Stochastic Model to Evaluate Residential Water Demands , 2004 .

[9]  Paolo S Calabrò,et al.  Simulation of the operation of detention tanks. , 2006, Water research.

[10]  Nien-Sheng Hsu,et al.  Optimal Spatial Design of Capacity and Quantity of Rainwater Harvesting Systems for Urban Flood Mitigation , 2015 .

[11]  Steven J. Burian,et al.  Water Supply and Stormwater Management Benefits of Residential Rainwater Harvesting in U.S. Cities , 2013 .

[12]  David J. Sample,et al.  Optimizing rainwater harvesting systems for the dual purposes of water supply and runoff capture , 2014 .

[13]  Bruno Tassin,et al.  Rainwater harvesting to control stormwater runoff in suburban areas. An experimental case-study , 2012 .