Application of varying-frequency amplitude-only technique for electrical characterization of hardened cement-based materials

There is a need for characterization of cement-based materials by a simple and inexpensive microwave measurement setup for industrial applications. Nondestructive and contactless characterization of these materials can be realized by free-space reflection/transmission measurements. Reflection measurements are convenient for applications where the sensor can only be placed on one side of the material such as measurements on pavement, backfilled concrete wall, and roadway. In this article, we use varying-frequency amplitude-only technique for electrical characterization of cement-based materials using reflection measurements at three different frequencies. We have demonstrated that measurements by the proposed method are in good agreement with those obtained from reflection and transmission measurements. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52:801–805, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25057

[1]  Zhihong Ma,et al.  Permittivity determination using amplitudes of transmission and reflection coefficients at microwave frequency , 1999 .

[2]  U. Hasar.  Two novel amplitude-only methods for complex permittivity determination of medium- and low-loss materials , 2008 .

[3]  C. Westgate,et al.  Noniterative Permittivity Extraction of Lossy Liquid Materials From Reflection Asymmetric Amplitude-Only Microwave Measurements , 2009, IEEE Microwave and Wireless Components Letters.

[4]  C. Westgate,et al.  A Broadband and Stable Method for Unique Complex Permittivity Determination of Low-Loss Materials , 2009, IEEE Transactions on Microwave Theory and Techniques.

[5]  John S. Popovics,et al.  Non‐Destructive Evaluation for Civil Engineering Structures and Materials , 2004 .

[6]  Ugur Cem Hasar,et al.  Non-destructive testing of hardened cement specimens at microwave frequencies using a simple free-space method , 2009 .

[7]  U. Hasar.  Free-space nondestructive characterization of young mortar samples , 2007 .

[8]  Carlo Atzeni,et al.  A microwave radar technique for dynamic testing of large structures , 2003 .

[9]  Kavitha Arunachalam,et al.  Microwave NDT of cement-based materials using far-field reflection coefficients , 2006 .

[10]  M. Forde,et al.  Review of NDT methods in the assessment of concrete and masonry structures , 2001 .

[11]  U. Hasar.  A Fast and Accurate Amplitude-Only Transmission-Reflection Method for Complex Permittivity Determination of Lossy Materials , 2008, IEEE Transactions on Microwave Theory and Techniques.

[12]  Osamu Hashimoto,et al.  An Experimental Study on the Calculation of the Complex Permittivity for Building Materials from the Reflection Loss by Free Space Measurement , 2004 .

[13]  P. Domich,et al.  Analysis of an open-ended coaxial probe with lift-off for nondestructive testing , 1994 .