An application of interleaved DC-DC converters to obtain I-V characteristic curves of photovoltaic modules

The basic operation of a solar cell, module or photovoltaic generator under different irradiation and temperature conditions is characterized by its I-V characteristic curve. Only the experimental measurement of the I-V curve allows us to know the electrical parameters of a photovoltaic cell, module or array. This measure provides very relevant information for the design, installation and maintenance of photovoltaic systems. Currently, the I-V characteristic curve is obtained by connecting a variable charge to the panel terminals in order to achieve that the current of the terminals ranges from zero to the short circuit current. In this paper, a new experimental methodology to measure this characteristic curve by using several SEPIC converters in parallel connection operating in interleaved mode is proposed. This methodology provides two fundamental advantages for this application as regards the use of a single converter: (1) It allows to reproduce I-V curves of higher power (2) It allows to obtain these curves with lower ripple.

[1]  N. H. Helwa,et al.  Estimation of the maximum power and normal operating power of a photovoltaic module by neural networks , 2004 .

[2]  J.A. Melkebeek,et al.  Input current distortion of CCM boost PFC converters operated in DCM , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[3]  J. M. Enrique,et al.  A new approach to obtain I-V and P-V curves of photovoltaic modules by using DC-DC converters , 2005, Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005..

[4]  Esther de Jódar,et al.  Optimizing the Design of Single-Stage Power-Factor Correctors , 2007, IEEE Transactions on Industrial Electronics.

[5]  David L. King,et al.  Photovoltaic module and array performance characterization methods for all system operating conditions , 1996 .

[6]  Luis Martinez-Salamero,et al.  Interleaved converters operation based on CMC , 1999 .

[7]  O. Garcia,et al.  Automotive DC-DC bidirectional converter made with many interleaved buck stages , 2006, IEEE Transactions on Power Electronics.

[8]  Milan M. Jovanovic,et al.  State-of-the-art, single-phase, active power-factor-correction techniques for high-power applications - an overview , 2005, IEEE Transactions on Industrial Electronics.

[9]  S. Singer.  The application of 'loss-free resistors' in power processing circuits , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[10]  K. Al-Haddad,et al.  Practical Design of a SEPIC Power Factor Corrector with DC-Voltage Regulation , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[11]  A. García,et al.  Selecting a suitable model for characterizing photovoltaic devices , 2002 .

[12]  Bong-Hwan Kwon,et al.  Continuous-conduction-mode SEPIC converter with low reverse-recovery loss for power factor correction , 2006 .

[13]  Jingquan Chen,et al.  Analysis and design of SEPIC converter in boundary conduction mode for universal-line power factor correction applications , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[14]  J. M. Enrique,et al.  A new application of the coupled-inductors SEPIC converter to obtain I-V and P-V curves of photovoltaic modules , 2005, 2005 European Conference on Power Electronics and Applications.

[15]  E. Duran,et al.  A New Application of the Buck-Boost-Derived Converters to Obtain the I-V Curve of Photovoltaic Modules , 2007, 2007 IEEE Power Electronics Specialists Conference.

[16]  D. Maksimović,et al.  Averaged switch modeling of boundary conduction mode DC-to-DC converters , 2001, IECON'01. 27th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.37243).

[17]  Weidong Xiao,et al.  Real-Time Identification of Optimal Operating Points in Photovoltaic Power Systems , 2006, IEEE Transactions on Industrial Electronics.

[18]  D. L. King,et al.  Application and validation of a new PV performance characterization method , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[19]  Brett Andrew Miwa,et al.  Interleaved conversion techniques for high density power supplies , 1992 .