Characterization of Differentially Measured Strain Using Passive Wireless Surface Acoustic Wave (SAW) Strain Sensors

This paper presents characterization results from surface acoustic wave resonator (SAWR) strain sensors used to carry out wireless passive differential strain measurement. An elevated temperature SAWR strain sensor characterization data set is presented and the results used to demonstrate temperature compensation strategies and overall measurement channel signal sensitivity improvements with a differential SAW sensing element pair. The results are generated by a new wide bandwidth wireless interrogator capable of interrogating two SAWR sensors at high sample rates. Cross axis sensitivity caused by loading conditions generating strains in different directions to the desired strain condition is shown and a compensation strategy presented. The compensation method has reduced the cross axis sensitivity from 24% to 4% of full scale output (FSO). The elevated temperature characterization performance between 20 °C and 100 °C demonstrated a maximum hysteresis level of 0.49% of FSO between 400 με in compression and tension and an overall reduction in the apparent strain due to temperature from approximately 5.5% to 2.7% of FSO.

[1]  W. Buff,et al.  An interrogation unit for passive wireless SAW sensors based on Fourier transform , 2004, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  M. D. Rogge,et al.  Fastener Failure Detection Using a Surface Acoustic Wave Strain Sensor , 2012, IEEE Sensors Journal.

[3]  G E O'Donnell,et al.  Wireless Calibration of a Surface Acoustic Wave Resonator as a Strain Sensor , 2011, IEEE Sensors Journal.

[4]  Garret E. O’Donnell,et al.  Dynamic Response Analysis of Passive Wireless Surface Acoustic Wave (SAW) Strain Sensors Used for Force Measurement in Turning , 2013 .

[5]  Victor Kalinin,et al.  High-speed high dynamic range resonant SAW torque sensor for kinetic energy recovery system , 2010, EFTF-2010 24th European Frequency and Time Forum.

[6]  V. Kalinin,et al.  A Second Generation In-Car Tire Pressure Monitoring System Based on Wireless Passive SAW Sensors , 2006, 2006 IEEE International Frequency Control Symposium and Exposition.

[7]  Dermot Geraghty,et al.  Dynamic wireless passive strain measurement in CNC turning using surface acoustic wave sensors , 2013 .

[8]  L. Reindl,et al.  Wireless measurement of temperature using surface acoustic waves sensors , 2004, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  V. Kalinin,et al.  P1K-3 Contactless Torque and Temperature Sensor Based on SAW Resonators , 2006, 2006 IEEE Ultrasonics Symposium.

[10]  R. Fachberger,et al.  Applications of wireless SAW sensing in the steel industry , 2010 .

[11]  V. Kalinin,et al.  Application of Passive SAW Resonant Sensors to Contactless Measurement of the Output Engine Torque in Passenger Cars , 2007, 2007 IEEE International Frequency Control Symposium Joint with the 21st European Frequency and Time Forum.

[12]  V. Kalinin,et al.  Wireless physical SAW sensors for automotive applications , 2011, 2011 IEEE International Ultrasonics Symposium.

[13]  Leonhard M. Reindl,et al.  State of the art in wireless sensing with surface acoustic waves , 2001, IEEE Trans. Ind. Electron..

[14]  S Ballandras,et al.  A wireless interrogation system exploiting narrowband acoustic resonator for remote physical quantity measurement. , 2010, The Review of scientific instruments.

[15]  Dermot Geraghty,et al.  The Development of Surface Acoustic Wave Sensors (SAWs) for Process Monitoring , 2012 .

[16]  D. Geraghty,et al.  Packaging Considerations for a Surface Acoustic Wave Strain Sensor , 2012, IEEE Sensors Journal.

[17]  R. J. Lad,et al.  Recent advances in harsh environment acoustic wave sensors for contemporary applications , 2011, IEEE Sensors. Proceedings.

[18]  V. Kalinin,et al.  Pulsed interrogation of the SAW torque sensor for electrical power assisted steering , 2004, IEEE Ultrasonics Symposium, 2004.