Research on composite-phase change materials (PCMs)-bricks in the west wall of room-scale cubicle: Mid-season and summer day cases

Abstract This paper aims to evaluate the effect of applying PCMs into building walls for the improvement of thermal performance in mid-season and summer days. A kind of shape-stabilized PCMs is incorporated into cement mortar to make the PCMs-bricks. Phase change temperature range and latent heat is 15.80–22.28 °C and 61.44 kJ/kg, respectively. Experimental test of the wall is conducted in room-scale cubicle (3.25 m*3.86 m*2.91 m) in mid-season and summer days for a long time, and comparisons are made with a regular energy-saving wall. Results show that the composite-PCMs wall is in the core phase change temperature range from March 29 to April 30, during which fluctuation and maximum value of the interior wall surface temperature are obviously reduced. However, an insufficiency of liquid to solid phase transition has been observed in the days approaching April 30. Moreover, situations become serious after April 30 since the PCMs do not experience phase change any more. The above parameters become greater for the composite-PCMs wall, so does the interior wall surface heat flow. Maximum values of the interior wall surface temperature and heat flow are both higher for the composite-PCMs wall under either free-floating or air-conditioning cases in summer; an increase of about 43.23% of the heat transferred into the room is observed for a representative sunny day. Discussions about the optimization of the composite-PCMs wall are also conducted.

[1]  Luisa F. Cabeza,et al.  Life cycle assessment of the inclusion of phase change materials (PCM) in experimental buildings , 2010 .

[2]  Feng Xing,et al.  Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels , 2014 .

[3]  Xiaosong Zhang,et al.  Effects of PCM state on its phase change performance and the thermal performance of building walls , 2014 .

[4]  Harald Mehling,et al.  Enthalpy of Phase Change Materials as a Function of Temperature: Required Accuracy and Suitable Measurement Methods , 2009 .

[5]  Mario A. Medina,et al.  On the importance of the location of PCMs in building walls for enhanced thermal performance , 2013 .

[6]  Xin Wang,et al.  Influence of additives on thermal conductivity of shape-stabilized phase change material , 2006 .

[7]  Hang Yu,et al.  Research on temperature dependent effective thermal conductivity of composite-phase change materials (PCMs) wall based on steady-state method in a thermal chamber , 2016 .

[8]  G. Zannis,et al.  Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls , 2013 .

[9]  S. M. Sadrameli,et al.  A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium , 2014 .

[10]  Fitsum Tariku,et al.  Phase change material's (PCM) impacts on the energy performance and thermal comfort of buildings in a mild climate , 2016 .

[11]  Peng Zhang,et al.  A review of the composite phase change materials: Fabrication, characterization, mathematical modeling and application to performance enhancement , 2016 .

[12]  Hong Ye,et al.  The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index , 2014 .

[13]  Murat Kenisarin,et al.  Form-stable phase change materials for thermal energy storage , 2012 .

[14]  Teuku Meurah Indra Mahlia,et al.  Palmitic acid/polypyrrole composites as form-stable phase change materials for thermal energy storage , 2014 .

[15]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[16]  Z. Zainal,et al.  Encapsulation techniques for organic phase change materials as thermal energy storage medium: A review , 2015 .

[17]  Hang Yu,et al.  Experimental and numerical study of the thermal performance of a new type of phase change material room , 2013 .

[18]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[19]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[20]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[21]  Fariborz Haghighat,et al.  Designing building envelope with PCM wallboards: Design tool development , 2014 .

[22]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[23]  Chao Chen,et al.  Effect of phase change materials on indoor thermal environment under different weather conditions and over a long time , 2015 .

[24]  Viktoria Martin,et al.  Polyols as phase change materials for surplus thermal energy storage , 2016 .

[25]  Fariborz Haghighat,et al.  Expanding Heisler chart to characterize heat transfer phenomena in a building envelope integrated with phase change materials , 2015 .

[26]  Khamid Mahkamov,et al.  Passive thermal control in residential buildings using phase change materials , 2016 .

[27]  Zhihua Zhou,et al.  Phase change materials for solar thermal energy storage in residential buildings in cold climate , 2015 .

[28]  Luisa F. Cabeza,et al.  Determination of the enthalpy of PCM as a function of temperature using a heat‐flux DSC—A study of different measurement procedures and their accuracy , 2008 .

[29]  Siaw Kiang Chou,et al.  Achieving better energy-efficient air conditioning - A review of technologies and strategies , 2013 .

[30]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[31]  Hang Yu,et al.  Experimental assessment on the use of phase change materials (PCMs)-bricks in the exterior wall of a full-scale room , 2016 .