A Quantitative Analysis of the Thermoelastic Effect in CFRP Composite Materials

:  In this study the thermoelastic signal from carbon fibre-reinforced plastic (CFRP) laminates is investigated. A comparison between the theoretical and experimental values of the thermoelastic signal is reported, with the theoretical predictions obtained from two different quantitative models. These models are based on the classic thermoelastic effect law extended to the case of orthotropic materials (by using the mesomechanical or bulk approach), and the modified law assuming that the surface resin-rich layer behaves as a strain witness of the laminate. It is found that the theoretical predictions of the two models can be strongly and differently influenced by the intrinsic orthotropy of carbon fibres. Some effects are highlighted in particular such as the influence of the laminate lay-up and the strong mismatch between the thermal expansion coefficients of the polymer matrix and the fibres. These influences are investigated analytically, predicting the thermoelastic signal from various lay-ups and using strain-based and stress-based analytical models. Experimental evidence of some theoretical findings is provided by reporting on tests performed on CFRP tensile samples manufactured from low-crimp unidirectional fabrics.

[1]  A. K. Wong.  A non-adiabatic thermoelastic theory for composite laminates , 1991 .

[2]  Kenneth Reifsnider,et al.  The Adiabatic Thermoelastic Effect in Laminated Fiber Composites , 1991 .

[3]  J. M. Dulieu-Barton,et al.  Applications of thermoelastic stress analysis to composite materials , 1999 .

[4]  M. Biot.  Thermoelasticity and Irreversible Thermodynamics , 1956 .

[5]  R. Rowlands,et al.  Thermoelastic Determination of KI and KII in an Orthotropic Graphite–Epoxy Composite , 2003 .

[6]  L. J. Greaves,et al.  The Application Of Thermoelastic Stress Analysis Techniques To Fibre Composites , 1987, Optics & Photonics.

[7]  S. A. Dunn,et al.  The Mean Stress Effect in Metallic Alloys and Composites , 1989, Other Conferences.

[8]  P. Cunningham,et al.  A generalised approach to the calibration of orthotropic materials for thermoelastic stress analysis , 2008 .

[9]  Eann A. Patterson,et al.  An investigation of the influence of macroscopic heterogeneity on the thermoelastic response of fibre reinforced plastics , 2005 .

[10]  R. Shenoi,et al.  The Effect of Ply Lay-Up upon the Thermoelastic Response of Laminated Composites , 2001 .

[11]  Janice M. Dulieu-Barton,et al.  A temperature correction methodology for quantitative thermoelastic stress analysis and damage assessment , 2006 .

[12]  N. F. Enke,et al.  Thermographic stress analysis of composite materials , 1990 .

[13]  D. Van Hemelrijck,et al.  The effects of motion on thermoelastic stress analysis , 1991 .

[14]  G. Pitarresi,et al.  A review of the general theory of thermoelastic stress analysis , 2003 .

[15]  Dilek Kumlutaş,et al.  A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials , 2007 .

[16]  R. T. Potter.  Stress Analysis In Laminated Fibre Composites By Thermoelastic Emission , 1987, Other Conferences.

[17]  Umberto Galietti,et al.  Investigation on the Influence of the Surface Resin Rich Layer on the Thermoelastic Signal from Different Composite Laminate Lay-Ups , 2005 .

[18]  S. A. Dunn.  Analysis of Thermal Conduction Effects on Thermoelastic Temperature Measurements for Composite Materials , 1992 .

[19]  P. Stanley,et al.  The application of thermoelastic stress analysis techniques to composite materials , 1988 .

[20]  Rani Elhajjar,et al.  A quantitative thermoelastic stress analysis method for pultruded composites , 2003 .

[21]  J. Paul,et al.  Thermoelastic Assessment of Damage Growth in Composites , 1989 .