Interaction of buckling modes in castellated steel beams

Abstract This paper investigates the behaviour of normal and high strength castellated steel beams under combined lateral torsional and distortional buckling modes. An efficient nonlinear 3D finite element model has been developed for the analysis of the beams. The initial geometric imperfection and material nonlinearities were carefully considered in the analysis. The nonlinear finite element model was verified against tests on castellated beams having different lengths and different cross-sections. Failure loads and interaction of buckling modes as well as load–lateral deflection curves of castellated steel beams were investigated in this study. An extensive parametric study was carried out using the finite element model to study the effects of the change in cross-section geometries, beam length and steel strength on the strength and buckling behaviour of castellated steel beams. The parametric study has shown that the presence of web distortional buckling causes a considerable decrease in the failure load of slender castellated steel beams. It is also shown that the use of high strength steel offers a considerable increase in the failure loads of less slender castellated steel beams. The failure loads predicted from the finite element model were compared with that predicted from Australian Standards for steel beams under lateral torsional buckling. It is shown that the Specification predictions are generally conservative for normal strength castellated steel beams failing by lateral torsional buckling, unconservative for castellated steel beams failing by web distortional buckling and quite conservative for high strength castellated steel beams failing by lateral torsional buckling.

[1]  Mark A. Bradford,et al.  Distortional buckling of elastically restrained cantilevers , 1998 .

[2]  Mark A. Bradford,et al.  Elastic distortional buckling of continuously restrained I-section beam–columns , 2006 .

[3]  Nicholas S. Trahair,et al.  Flexural-Torsional Buckling of Structures , 1993 .

[4]  D A Nethercot,et al.  LATERAL-TORSIONAL BUCKLING OF CASTELLATED BEAMS , 1982 .

[5]  Ehab Ellobody,et al.  Behavior of Cold-Formed Steel Plain Angle Columns , 2005 .

[6]  Nicholas S. Trahair,et al.  Inelastic Lateral Buckling of Determinate Beams , 1976 .

[7]  Ehab Ellobody.  Buckling analysis of high strength stainless steel stiffened and unstiffened slender hollow section columns , 2007 .

[8]  Tadeh Zirakian.  Elastic distortional buckling of doubly symmetric I-shaped flexural members with slender webs , 2008 .

[9]  Ben Young,et al.  Buckling analysis of cold-formed steel lipped angle columns , 2005 .

[10]  M U Hosain,et al.  EXPERIMENTS ON CASTELLATED STEEL BEAMS , 1973 .

[11]  Shiming Chen,et al.  Numerical investigation of inelastic buckling of steel–concrete composite beams prestressed with external tendons , 2010 .

[12]  Ehab Ellobody,et al.  Structural performance of cold-formed high strength stainless steel columns , 2005 .

[13]  Mark A. Bradford.  Lateral-Distortional buckling of steel I—Section members , 1992 .

[14]  Hossein Showkati,et al.  Distortional buckling of castellated beams , 2006 .

[15]  David A. Nethercot,et al.  Failure modes for castellated beams , 1984 .

[16]  Luís Simões da Silva,et al.  Design of Steel Structures: Eurocode 3: Design of Steel Structures, Part 1-1: General Rules and Rules for Buildings , 2010 .

[17]  Richard Redwood,et al.  Web Buckling in Thin Webbed Castellated Beams , 1996 .