Sinusoidal Generator with π/4-Shifted Four/Eight Voltage Outputs Employing Four Grounded Components and Two/Six Active Elements

This paper presents a new circuit proposal for multiphase sine-wave generation, employing two active elements and four grounded passive elements. The proposed oscillator provides four 45° phase-shifted voltage outputs. Incorporation of additional inverters for generation of eight-phase outputs is further shown. Simultaneous current outputs can also be generated with additional output stages. The compact circuit structure is studied for nonideal and parasitic effects and simulation results are given, which are in good agreement with the theory. The utility of the proposal for π/4-QPSK generation is explored as an interesting application example with supporting results.

[1]  Stephan J. G. Gift.  The application of all-pass filters in the design of multiphase sinusoidal systems , 2000 .

[2]  Sudhanshu Maheshwari.  High output impedance current-mode all-pass sections with two grounded passive components , 2008, IET Circuits Devices Syst..

[3]  Sudhanshu Maheshwari.  Analogue signal processing applications using a new circuit topology , 2009, IET Circuits Devices Syst..

[4]  Dalibor Biolek,et al.  Current mode quadrature oscillator using two CDTAs and two grounded capacitors , 2006 .

[5]  Hassan Elwan,et al.  Novel CMOS differential voltage current conveyor and its applications , 1997 .

[6]  Sudhanshu Maheshwari,et al.  Second Order Mixed Mode Quadrature Oscillator using DVCCs and Grounded Components , 2012 .

[7]  S. S. Gupta,et al.  Realisation of Current-Mode SRCOs using All Grounded Passive Elements , 2003 .

[8]  Sudhanshu Maheshwari.  New voltage and current-mode APS using current controlled conveyor , 2004 .

[9]  I.A. Khan,et al.  First Order Current Mode Filters and Multiphase Sinusoidal Oscillators Using MOCCIIs , 2006, 2006 International Conference on Microelectronics.

[10]  K. Smith,et al.  A second-generation current conveyor and its applications , 1970, IEEE Transactions on Circuit Theory.

[11]  Stephan J. G. Gift.  Multiphase sinusoidal oscillator system using operational amplifiers , 1997 .

[12]  Nigar Minhaj.  Current conveyor-based voltage-mode two-phase and four-phase quadrature oscillators , 2007 .

[13]  A. Carlosena,et al.  Approach to the synthesis of canonic RC-active oscillators using CCII , 1994 .

[14]  Viera BIOLKOVÁ,et al.  Four-Phase Oscillators Employing Two Active Elements , 2011 .

[15]  Sudhanshu Maheshwari.  Novel cascadable current-mode first order all-pass sections , 2007 .

[16]  Sudhanshu Maheshwari,et al.  Novel voltage-Mode cascadable All-Pass sections Employing Grounded Passive Components , 2013, J. Circuits Syst. Comput..

[17]  SudhanshuMaheshwari.  Voltage-Mode Four-Phase Sinusoidal Generator and Its Useful Extensions , 2015 .

[18]  Montree Siripruchyanun,et al.  Realization of electronically tunable voltage-mode/current-mode quadrature sinusoidal oscillator using ZC-CG-CDBA , 2011, Microelectron. J..

[19]  Ahmed M. Soliman.  Generation and classification of Kerwin-Huelsman-Newcomb circuits using the DVCC , 2009, Int. J. Circuit Theory Appl..

[20]  Muslim T. Ahmed,et al.  Tunable four phase voltage mode quadrature oscillator using two CMOS MOCCIIs , 2009, 2009 International Multimedia, Signal Processing and Communication Technologies.

[21]  Ahmed M. Soliman.  Current Feedback Operational Amplifier Based Oscillators , 2000 .