Brittle fracture of U-notched graphite plates under mixed mode loading

Abstract Brittle fracture of isostatic polycrystalline graphite is studied experimentally, theoretically and numerically using U-notched samples under mode I and mixed mode loading (I + II) considering different combinations of the notch radius and the tilt angle of the notch. An experimental programme was performed to provide a new set of results. In total 60 new data are provided in the paper. The averaged value of the strain energy density over a control volume is used to assess the static strength of the specimens subjected to different mode mixities. The volume is centred where the principal stress reaches its maximum value on the notch edge, by rigidly rotating the crescent-shaped volume already used in the literature to analyse U- and V-shaped notches subject to mode I loading. The volume size depends on the fracture toughness and the ultimate tensile strength of the material. Good agreement is found between experimental data and theoretical predictions based on the constancy of the mean strain energy density over the control volume.

[1]  Zohar Yosibash,et al.  Failure criteria for brittle elastic materials , 2004 .

[2]  Andrzej Seweryn,et al.  Brittle fracture criterion for structures with sharp notches , 1994 .

[3]  Filippo Berto,et al.  Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications , 2010 .

[4]  M. Elices,et al.  Local strain energy to assess the static failure of U-notches in plates under mixed mode loading , 2007 .

[5]  F. J. Gómez,et al.  Fracture of U-notched specimens under mixed mode: Experimental results and numerical predictions , 2009 .

[6]  Filippo Berto,et al.  Mixed mode brittle fracture of sharp and blunt V-notches in polycrystalline graphite , 2011 .

[7]  T. Okabe,et al.  Impact. Measurement of Mixed-Mode Fracture Toughness for Brittle Materials Using Edge-Notched Half-Disk Specimen. , 2001 .

[8]  F. Berto,et al.  Generalised stress intensity factors for rounded notches in plates under in-plane shear loading , 2011 .

[9]  F. Berto,et al.  Some Expressions for the Strain Energy in a Finite Volume Surrounding the Root of Blunt V-notches , 2005 .

[10]  Y. Alizadeh,et al.  The effect of notch depth on J-integral and critical fracture load in plates made of functionally graded aluminum–silicone carbide composite with U-notches under bending , 2010 .

[11]  Filippo Berto,et al.  Some new practical equations for rapid calculation of J-integral in plates weakened by U-notches under bending , 2010 .

[12]  Paolo Lazzarin,et al.  A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches , 2001 .

[13]  G. Papadopoulos,et al.  Crack initiation from blunt notches under biaxial loading , 1988 .

[14]  M. Elices,et al.  Fracture of V-notched specimens under mixed mode (I + II) loading in brittle materials , 2009 .

[15]  Paul C. Paris,et al.  Elastic field equations for blunt cracks with reference to stress corrosion cracking , 1967 .

[16]  Manuel Elices,et al.  Cracking in PMMA containing U‐shaped notches , 2000 .

[17]  Filippo Berto,et al.  Fracture assessment of U-notches under three point bending by means of local energy density , 2011 .

[18]  Zohar Yosibash,et al.  Failure initiation at a blunt V-notch tip under mixed mode loading , 2008 .

[19]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[20]  M. Elices,et al.  A fracture criterion for sharp V-notched samples , 2003 .

[21]  E. M. Morozov,et al.  Calculation of the energy J-integral for bodies with notches and cracks , 2004 .

[22]  Mahmoud Mostafavi,et al.  Quantitative in situ study of short crack propagation in polygranular graphite by digital image correlation , 2012 .

[23]  Filippo Berto,et al.  Some advantages derived from the use of the strain energy density over a control volume in fatigue strength assessments of welded joints , 2008 .

[24]  Paolo Lazzarin,et al.  A generalized stress intensity factor to be applied to rounded V-shaped notches , 2006 .

[25]  A. R. Torabi,et al.  Brittle fracture in rounded-tip V-shaped notches , 2010 .

[26]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[27]  Morten Strandberg,et al.  Fracture at V-notches with contained plasticity , 2002 .

[28]  Andrzej Seweryn,et al.  Verification of brittle fracture criteria for elements with V-shaped notches , 2002 .

[29]  Dai-heng Chen,et al.  Investigation of failure criteria for a sharp notch , 2008 .

[30]  Filippo Berto,et al.  Fatigue strength of a fork-pin equivalent coupling in terms of the local strain energy density , 2008 .

[31]  M. Elices,et al.  Failure criteria for linear elastic materials with U-notches , 2006 .

[32]  D. A. Zacharopoulos,et al.  Stability analysis of crack path using the strain energy density theory , 2004 .

[33]  A. R. Torabi,et al.  Determination of mode II fracture toughness for U-shaped notches using Brazilian disc specimen , 2010 .

[34]  F. J. Gómez,et al.  Fracture assessment of U-notches under mixed mode loading: two procedures based on the ‘equivalent local mode I’ concept , 2007 .

[35]  A. Berezin,et al.  Finding the fracture toughness characteristics of graphite materials in plane strain , 1975 .

[36]  George A. Gogotsi,et al.  Fracture toughness of ceramics and ceramic composites , 2003 .

[37]  Zohar Yosibash,et al.  A failure criterion for brittle elastic materials under mixed-mode loading , 2006 .

[38]  Filippo Berto,et al.  Fracture assessment of Brazilian disc specimens weakened by blunt V-notches under mixed mode loading by means of local energy , 2011 .

[39]  M. Kuna,et al.  Crack initiation behavior in StE690 Steel characterized by strain energy density criterion , 2001 .

[40]  Guy Pluvinage,et al.  Stress field near a large blunted tip V-notch and application of the concept of the critical notch stress intensity factor (NSIF) to the fracture toughness of very brittle materials , 1994 .

[41]  Filippo Berto,et al.  Brittle failures from U- and V-notches in mode I and mixed, I + II, mode: a synthesis based on the strain energy density averaged on finite-size volumes , 2009 .

[42]  Filippo Berto,et al.  A generalised notch stress intensity factor for U-notched components loaded under mixed mode , 2008 .

[43]  Paolo Lazzarin,et al.  A notch stress intensity approach applied to fatigue life predictions of welded joints with different local toe geometry , 2003 .

[44]  Filippo Berto,et al.  A review of the volume-based strain energy density approach applied to V-notches and welded structures , 2009 .

[45]  M. Ayatollahi,et al.  Tensile fracture in notched polycrystalline graphite specimens , 2010 .

[46]  Zdeněk Knésl,et al.  A criterion of V-notch stability , 1991 .

[47]  A. R. Torabi,et al.  Investigation of mixed mode brittle fracture in rounded-tip V-notched components , 2010 .

[48]  Filippo Berto,et al.  Control volumes and strain energy density under small and large scale yielding due to tension and torsion loading , 2008 .

[49]  Filippo Berto,et al.  Brittle fracture of sharp and blunt V-notches in isostatic graphite under torsion loading , 2012 .