Modelling and control of printing paper surface winding

PREFACE SYMBOLS AND ABBREVIATIONS

[1]  Per Erik Austrell.  Modeling of Elasticity and Damping for Filled Elastomers , 1997 .

[2]  Raimo von Hertzen,et al.  Development of web tension in a winding nip , 2001 .

[3]  A. Tenno.  Modelling and evaluation of valve-regulated lead-acid batteries , 2004 .

[4]  D. Rubinfeld,et al.  Econometric models and economic forecasts , 2002 .

[5]  R. C. Benson.  A Nonlinear Wound Roll Model Allowing for Large Deformation , 1995 .

[6]  Sanna Pöyhönen.  Support vector machine based classification in condition monitoring of induction motors , 2004 .

[7]  Contact Mechanical Approach to the Winding Nip , 1999 .

[8]  Marko Jorkama,et al.  Contact mechanical model for winding nip , 2001 .

[9]  Heikki Hyötyniemi.  Collected papers of the Spring 2003 postgraduate seminar , 2004 .

[10]  V. Hasu.  ADAPTIVE BEAMFORMING AND POWER CONTROL IN WIRELESS COMMUNICATION SYSTEMS , 2006 .

[11]  Heikki Hyötyniemi,et al.  PROCESS PERFORMANCE OPTIMIZATION USING ITERATIVE REGRESSION TUNING , 2005 .

[12]  Jan Lif.  Analysis of the time and humidity-dependent mechanical behaviour of paper webs at offset printing preess conditions , 2003 .

[13]  John C. Lambropoulos,et al.  Strain-based formulas for stresses in profiled center-wound rolls , 1999 .

[15]  Jonathan A. Wickert,et al.  Stress Field in Finite Width Axisymmetric Wound Rolls , 2002 .

[16]  J. K. Good,et al.  The Mechanism of Nip-Induced Tension in Wound Rolls , 1993 .

[17]  Yang Xiao,et al.  Security in Sensor Networks , 2006 .

[18]  Comparison of Stresses in Center-Wound Rolls From Two Linear Elastic Models , 2003 .

[19]  Karl Johan Åström,et al.  PID Controllers: Theory, Design, and Tuning , 1995 .

[20]  Rudolf Kulhavý,et al.  System modelling and identification : By Rolf Johansson. Prentice-Hall, Englewood Cliffs, NJ (1993). ISBN 0-13-482308-7 , 1997, Autom..

[21]  M. S. Willett,et al.  Determining the Stress Distributions in Wound Reels of Magnetic Tape Using a Nonlinear Finite-Difference Approach , 1988 .

[22]  Paavo Viitamäki,et al.  Hybrid modeling of paper machine grade changes , 2003 .

[23]  Z. Hakiel.  Nonlinear model for wound roll stresses , 1987 .

[24]  David R. Roisum,et al.  Measurement of Web Stresses During Roll Winding , 1990 .

[25]  Mohammed Elmusrati.  Radio resource scheduling and smart antennas in cellular CDMA communication systems , 2004 .

[26]  S. Poyhonen.  Support vector machine based classification in condition monitoring of induction motors , 2004 .

[27]  Kai Zenger,et al.  Modelling, analysis and controller design of time-variable flow processes , 2003 .