SiC-based refractory paints prepared with alkali aluminosilicate binders

[1]  Waltraud M. Kriven,et al.  Composite Cold Ceramic Geopolymer in a Refractory Application , 2012 .

[2]  Waltraud M. Kriven,et al.  Microstructure and microchemistry of fully-reacted geopolymers and geopolymer matrix composites , 2012 .

[3]  V. Medri,et al.  Role of the morphology and the dehydroxylation of metakaolins on geopolymerization , 2010 .

[4]  Meirong Wang,et al.  Influence of calcination temperature of kaolin on the structure and properties of final geopolymer , 2010 .

[5]  Meirong Wang,et al.  Improvement of high-temperature mechanical properties of heat treated Cf/geopolymer composites by Sol-SiO2 impregnation , 2010 .

[6]  J. Ferreira,et al.  Effect of test conditions on the bending strength of a geopolymer-reinforced composite , 2010, Journal of Materials Science.

[7]  C. Kaps,et al.  Geopolymeric binders with different fine fillers — Phase transformations at high temperatures , 2009 .

[8]  Tiesong Lin,et al.  Thermo-mechanical and Microstructural Characterization of Geopolymers with α-Al2O3 Particle Filler , 2009 .

[9]  John L. Provis,et al.  Correlating mechanical and thermal properties of sodium silicate-fly ash geopolymers , 2009 .

[10]  Henri Van Damme,et al.  Geopolymers from Algerian metakaolin. Influence of secondary minerals , 2009 .

[11]  Tiesong Lin,et al.  Effects of fiber length on mechanical properties and fracture behavior of short carbon fiber reinforced geopolymer matrix composites , 2008 .

[12]  Z. Sobalík,et al.  Metal Ions as Probes for Characterization of Geopolymer Materials , 2008 .

[13]  Eddie,et al.  Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber , 2008 .

[14]  Glykeria Kakali,et al.  Dissolution of aluminosilicate minerals and by-products in alkaline media , 2007 .

[15]  Perumalsamy N. Balaguru,et al.  Novel geopolymer based composites with enhanced ductility , 2007 .

[16]  Jonathan L. Bell,et al.  Geopolymers: Nanoparticulate, Nanoporous Ceramics Made Under Ambient Conditions , 2004, Microscopy and Microanalysis.

[17]  Liping He,et al.  Study on aluminum phosphate binder and related Al2O3-SiC ceramic coating , 2003 .

[18]  P. Grant,et al.  Low pressure plasma-sprayed Al2O3 and Al2O3/SiC nanocomposite coatings from different feedstock powders , 2003 .

[19]  V. Medri,et al.  Influence of additives content on the high temperature oxidation of silicon nitride based composites , 2003 .

[20]  V. Medri,et al.  Factors inducing degradation of properties after long term oxidation of Si3N4–TiN electroconductive composites , 2002 .

[21]  A. Matthews,et al.  Plasma electrolysis for surface engineering , 1999 .

[22]  É. Felder,et al.  Caractérisation mecanique par flexion, nano- et macro-indentation de revêtements de SiC par PACVD micro-onde sur acier , 1998 .

[23]  R. Munro.  Material Properties of a Sintered α-SiC , 1997 .

[24]  J. Rivière,et al.  Characterization and wear behavior of SiC coatings prepared by ion beam assisted deposition , 1996 .

[25]  J. Davidovits.  Geopolymers , 1991 .

[26]  J. R. Mackert,et al.  Quantitative X‐ray Diffraction Determination of Leucite Thermal instability in Dental Porcelain , 1991 .

[27]  P. Steinmann,et al.  Adhesion testing by the scratch test method: The influence of intrinsic and extrinsic parameters on the critical load , 1987 .

[28]  Waltraud M. Kriven,et al.  Formation of ceramics from metakaolin-based geopolymers , 2009 .

[29]  Waltraud M. Kriven,et al.  Formation of Ceramics from Metakaolin‐Based Geopolymers. Part II: K‐Based Geopolymer , 2009 .

[30]  M. Devi.  On the nature of phases in Al2O3 and Al2O3-SiC thermal spray coatings , 2004 .

[31]  Mark E. Smith,et al.  Multinuclear solid-state NMR of inorganic materials , 2002 .

[32]  W. Kowbel,et al.  A hybrid PACVD SiC/CVD Si3N4SiC multilayer coating for oxidation protection of composites , 1995 .

[33]  W. D. Kingery,et al.  Introduction to Ceramics , 1976 .