Impact of compression on gas transport in non-woven gas diffusion layers of high temperature polymer electrolyte fuel cells

Abstract Gas transport in non-woven gas diffusion layers of a high-temperature polymer electrolyte fuel cell was calculated with the Lattice Boltzmann method. The underlying micro structure was taken from two sources. A real micro structure was analyzed in the synchrotron under the impact of a compression mask mimicking the channel/rib structure of a flow field. Furthermore a stochastic geometry model based on synchrotron X-ray tomography studies was applied. The effect of compression is included in the stochastic model. Gas transport in these micro structures was simulated and the impact of compression was analyzed. Fiber bundles overlaying the micro structure were identified which affect the homogeneity of the gas flow. There are significant deviations between the impact of compression on effective material properties for this type of gas diffusion layers and the Kozeny-Carman equation.

[1]  Z. Fishman,et al.  Heterogeneous Through-Plane Distributions of Tortuosity, Effective Diffusivity, and Permeability for PEMFC GDLs , 2011 .

[2]  Rui Chen,et al.  A Numerical Study of Structural Change and Anisotropic Permeability in Compressed Carbon Cloth Polymer Electrolyte Fuel Cell Gas Diffusion Layers , 2011 .

[3]  D. Stolten,et al.  Performance Analysis of HT-PEFC Stacks , 2012 .

[4]  B. Pollet,et al.  Effect of Platinum Distribution in Dual Catalyst Layer Structured Gas Diffusion Electrode on the Performance of High Temperature PEMFC , 2014 .

[5]  Volker Schmidt,et al.  Stochastic 3D modeling of fiber-based materials , 2012 .

[6]  Suresh G. Advani,et al.  Experimental characterization of in-plane permeability of gas diffusion layers , 2006 .

[7]  Michael M. Daino,et al.  3D phase-differentiated GDL microstructure generation with binder and PTFE distributions , 2012 .

[8]  Hyunchul Ju,et al.  A numerical investigation of the effects of GDL compression and intrusion in polymer electrolyte fuel cells (PEFCs) , 2012 .

[9]  I. Manke,et al.  3D microstructure modeling of compressed fiber-based materials , 2014 .

[10]  Anthony D. Santamaria,et al.  Effect of cross-flow on PEFC liquid-water distribution: An in-situ high-resolution neutron radiography study , 2015 .

[11]  Ahmet Kusoglu,et al.  A Critical Review of Modeling Transport Phenomena in Polymer-Electrolyte Fuel Cells , 2014 .

[12]  Z. Koza,et al.  Tortuosity-porosity relation in porous media flow. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[13]  Antti I. Koponen,et al.  Tortuous flow in porous media. , 1996, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[14]  A. Tamayol,et al.  A theoretical model to predict gas permeability for slip flow through a porous medium , 2014 .

[15]  D. Wolf-Gladrow.  Lattice-Gas Cellular Automata and Lattice Boltzmann Models: An Introduction , 2000 .

[16]  Volker Schmidt,et al.  Three-dimensional study of compressed gas diffusion layers using synchrotron X-ray imaging , 2014 .

[17]  Combined local current distribution measurements and high resolution neutron radiography of operating Direct Methanol Fuel Cells , 2009 .

[18]  Sauro Succi,et al.  The lattice Boltzmann equation: a new tool for computational fluid-dynamics , 1991 .

[19]  Werner Lehnert,et al.  3D modeling of a 200 cm2 HT-PEFC short stack , 2012 .

[20]  Majid Bahrami,et al.  SINGLE PHASE THROUGH-PLANE PERMEABILITY OF CARBON PAPER GAS DIFFUSION LAYERS , 2012 .

[21]  Volker Schmidt,et al.  3 D analysis , modeling and simulation of transport processes in compressed fibrous microstructures , using the Lattice Boltzmann method , 2013 .

[22]  C. Amon,et al.  Effect of porosity heterogeneity on the permeability and tortuosity of gas diffusion layers in polymer electrolyte membrane fuel cells , 2014 .

[23]  Hyunchul Ju,et al.  Investigation of the effects of the anisotropy of gas-diffusion layers on heat and water transport in polymer electrolyte fuel cells , 2009 .

[24]  I. Manke,et al.  Stochastic 3D modeling of non-woven materials with wet-proofing agent , 2013 .

[25]  P. Pollard,et al.  Investigation of species transport in a gas diffusion layer of a polymer electrolyte membrane fuel cell through two-phase modelling , 2013 .

[26]  C. Siegel.  Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (PEM) fuel cells , 2008 .

[27]  Hongtan Liu,et al.  In-situ measurements of GDL effective permeability and under-land cross-flow in a PEM fuel cell , 2012 .

[28]  Yuan Gao,et al.  Lattice Boltzmann simulation of water and gas flow in porous gas diffusion layers in fuel cells reconstructed from micro-tomography , 2013, Comput. Math. Appl..

[29]  J. Banhart,et al.  In-situ synchrotron X-ray radiography on high temperature polymer electrolyte fuel cells , 2010 .

[30]  Miss A.O. Penney.  (b) , 1974, The New Yale Book of Quotations.

[31]  M. Pourkashanian,et al.  Prediction of the Permeability of Fibrous Porous Media Using the Lattice Boltzmann Method in Conjuction with Coarse Numerical Lattices , 2010 .

[32]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[33]  K. Wippermann,et al.  Effect of Spiral Flow Field Design on Performance and Durability of HT-PEFCs , 2013 .

[34]  H. Ju,et al.  Three-dimensional non-isothermal modeling of a phosphoric acid-doped polybenzimidazole (PBI) membrane fuel cell , 2012 .

[35]  Volker Schmidt,et al.  3D analysis, modeling and simulation of transport processes in compressed fibrous microstructures, using the Lattice Boltzmann method , 2013 .

[36]  W. Lehnert,et al.  Stochastic Aspects of Mass Transport in Gas Diffusion Layers , 2014, Transport in Porous Media.

[37]  The influence of gas diffusion layer wettability on direct methanol fuel cell performance: A combined local current distribution and high resolution neutron radiography study , 2010 .

[38]  M. M. Tomadakis,et al.  Viscous Permeability of Random Fiber Structures: Comparison of Electrical and Diffusional Estimates with Experimental and Analytical Results , 2005 .

[39]  B. Pollet,et al.  Optimization of gas diffusion electrode for polybenzimidazole-based high temperature proton exchange membrane fuel cell: Evaluation of polymer binders in catalyst layer , 2013 .

[40]  H. Ju,et al.  Numerical modeling and investigation of gas crossover effects in high temperature proton exchange membrane (PEM) fuel cells , 2013 .

[41]  Werner Lehnert,et al.  Investigation of water evolution and transport in fuel cells with high resolution synchrotron x-ray radiography , 2007 .

[42]  Werner Lehnert,et al.  Extraction of Curved Fibers from 3D Data , 2013 .

[43]  Chao-Yang Wang,et al.  Measurement of relative permeability of fuel cell diffusion media , 2010 .

[44]  Volker Schmidt,et al.  Random geometric graphs for modelling the pore space of fibre-based materials , 2011 .

[45]  Volker Schmidt,et al.  Stochastic 3D Modeling of the GDL Structure in PEMFCs Based on Thin Section Detection , 2008 .

[46]  I. Manke,et al.  Local Structural Characteristics of Pore Space in GDLs of PEM Fuel Cells Based on Geometric 3D Graphs , 2009 .

[47]  S. Beale.  Mass transfer formulation for polymer electrolyte membrane fuel cell cathode , 2015 .

[48]  Erlend Magnus Viggen,et al.  The Lattice Boltzmann Equation , 2017 .

[49]  J. Benziger,et al.  The effect of gas diffusion layer compression on gas bypass and water slug motion in parallel gas flow channels , 2015 .

[50]  B. Sundén,et al.  Compress effects on porosity, gas‐phase tortuosity, and gas permeability in a simulated PEM gas diffusion layer , 2015 .

[51]  T. Bednarek,et al.  Study of effective transport properties of fresh and aged gas diffusion layers , 2015 .