An Electromagnetic Variable Stiffness Device for Semiactive Seat Suspension Vibration Control

This article introduces a rotary semiactive variable stiffness (VS) device, including its system design and model validation. A variable damping (VD) device and springs can form mechanical networks with specific topologies, and the VD device can control the equivalent stiffness of the network by varying its damping. The proposed rotary electromagnetic VS device consists of an electromagnetic VD device and a torsion spring, which are in series, while a planetary gear reducer is used to amplify the torque output of the VS device. The models of the electromagnetic VD and VS devices are both built and validated with tests. Then, a seat suspension applies the VS device by installing the device in the center of its scissors structure. Bump and random vibration experiments are implemented to validate the effectiveness of the proposed VS system for seat suspension vibration control. The new system has merits in controllability and energy efficiency. It is easier to design the controller than the conventional one with magnetorheological damper due to the linear damping of the electromagnetic VD device. Besides, the system energy consumption is low and has energy harvesting capability. The proposed semiactive electromagnetic VS device also has potential in other practical applicationss.

[1]  Igor Maciejewski,et al.  Modeling and vibration control of an active horizontal seat suspension with pneumatic muscles , 2018 .

[3]  Kyoung Kwan Ahn,et al.  A vibration isolation system in low frequency excitation region using negative stiffness structure for vehicle seat , 2011 .

[4]  Yuewei Yu,et al.  Modelling and validation of a seat suspension with rubber spring for off-road vehicles , 2018 .

[5]  Haiping Du,et al.  An Innovative Two-Layer Multiple-DOF Seat Suspension for Vehicle Whole Body Vibration Control , 2018, IEEE/ASME Transactions on Mechatronics.

[6]  Lei Zuo,et al.  Electromagnetic Energy-Harvesting Shock Absorbers: Design, Modeling, and Road Tests , 2013, IEEE Transactions on Vehicular Technology.

[7]  Seung-Bok Choi,et al.  Vibration control of electrorheological seat suspension with human-body model using sliding mode control , 2007 .

[8]  Weihua Li,et al.  Active control of an innovative seat suspension system with acceleration measurement based friction estimation , 2016 .

[9]  Anil K. Agrawal,et al.  Semi-active hybrid control systems for nonlinear buildings against near-field earthquakes , 2002 .

[10]  Songye Zhu,et al.  Versatile Behaviors of Electromagnetic Shunt Damper With a Negative Impedance Converter , 2018, IEEE/ASME Transactions on Mechatronics.

[11]  Igor Maciejewski,et al.  The vibration damping effectiveness of an active seat suspension system and its robustness to varying mass loading , 2010 .

[12]  Weihua Li,et al.  An Energy Saving Variable Damping Seat Suspension System With Regeneration Capability , 2018, IEEE Transactions on Industrial Electronics.

[13]  Markus Schweizer,et al.  Semi Active Suspension Control Design For Vehicles , 2016 .

[14]  Seung-Bok Choi,et al.  Vibration control of an MR seat damper for commercial vehicles , 2000, Smart Structures.

[15]  Zengkang Gan,et al.  Adaptive control of an active seat for occupant vibration reduction , 2015 .

[16]  Igor Maciejewski,et al.  Control system design of active seat suspensions , 2012 .

[17]  Wei-Hsin Liao,et al.  Semi-active suspension systems for railway vehicles using magnetorheological dampers. Part I: system integration and modelling , 2009 .

[18]  Mehdi Ahmadian,et al.  Improving Vehicle Lateral Stability Based on Variable Stiffness and Damping Suspension System via MR Damper , 2014, IEEE Transactions on Vehicular Technology.

[19]  Hiroshi Matsuhisa,et al.  Semi-active vibration isolation system with variable stiffness and damping control , 2008 .

[20]  Nong Zhang,et al.  Semi-active variable stiffness vibration control of vehicle seat suspension using an MR elastomer isolator , 2011 .

[21]  Stefan Hurlebaus,et al.  Application of semi-active control strategies for seismic protection of buildings with MR dampers , 2010 .

[22]  X. Jiao,et al.  Modified active disturbance rejection control for non-linear semi-active vehicle suspension with magneto-rheological damper , 2018, Trans. Inst. Meas. Control.

[23]  Malcolm C. Smith,et al.  Positive real synthesis using matrix inequalities for mechanical networks: application to vehicle suspension , 2004, IEEE Transactions on Control Systems Technology.

[24]  Seung-Bok Choi,et al.  On the response time of a new permanent magnet based magnetorheological damper: experimental investigation , 2018, Smart Materials and Structures.

[25]  Fu-Cheng Wang,et al.  Performance benefits in passive vehicle suspensions employing inerters , 2003, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475).

[26]  Tianhong Yan,et al.  A Compact Variable Stiffness and Damping Shock Absorber for Vehicle Suspension , 2015, IEEE/ASME Transactions on Mechatronics.

[27]  Peng Jiang,et al.  Integrated semi-active seat suspension for both longitudinal and vertical vibration isolation , 2017 .

[28]  Nong Zhang,et al.  Vibration control of an energy regenerative seat suspension with variable external resistance , 2018, Mechanical Systems and Signal Processing.

[29]  Mingming Dong,et al.  Road excitation classification for semi-active suspension system based on system response , 2018 .

[30]  Haiping Du,et al.  Development and simulation evaluation of a magnetorheological elastomer isolator for seat vibration control , 2012 .

[31]  Nong Zhang,et al.  Direct voltage control of magnetorheological damper for vehicle suspensions , 2013 .

[32]  Taro Shimogo,et al.  Active Suspension of Truck Seat , 1998 .

[33]  Miao Yu,et al.  Development and simulation evaluation of a magnetorheological elastomer isolator for transformer vibration control , 2018, 2018 Chinese Control And Decision Conference (CCDC).

[35]  Shouhu Xuan,et al.  Semi-active H∞ control of high-speed railway vehicle suspension with magnetorheological dampers , 2013 .