Aplicação da Metodologia de Superfície de Resposta para Otimização do Processo de Solda a Ponto no Aço Galvanizado AISI 1006

[1]  Min Jou,et al.  Real time monitoring weld quality of resistance spot welding for the fabrication of sheet metal assemblies , 2003 .

[2]  B. Carlson,et al.  Characterization of intermetallic compound at the interfaces of Al-steel resistance spot welds , 2017 .

[3]  M. Pouranvari.  Fracture toughness of martensitic stainless steel resistance spot welds , 2017 .

[4]  S. Aslanlar,et al.  The effect of nucleus size on mechanical properties in electrical resistance spot welding of sheets used in automotive industry , 2006 .

[5]  Óscar Martín,et al.  Artificial neural networks for quality control by ultrasonic testing in resistance spot welding , 2007 .

[6]  F. Yusof,et al.  Microstructure and mechanical properties of resistance spot welded in welding-brazing mode and resistance element welded magnesium alloy/austenitic stainless steel joints , 2017 .

[7]  Y. Zhou,et al.  Comparative effects of Al-Si and galvannealed coatings on the properties of resistance spot welded hot stamping steel joints , 2016 .

[8]  Óscar Martín,et al.  Combined effect of resistance spot welding and precipitation hardening on tensile shear load bearing capacity of A286 superalloy , 2017 .

[9]  P. V. Rao,et al.  A surface roughness prediction model for hard turning process , 2007 .

[10]  Yang Li,et al.  Dissimilar joining of AZ31B magnesium alloy and pure copper via thermo-compensated resistance spot welding , 2017 .

[11]  Young-Ju Kim,et al.  Optimization of color and COD removal from livestock wastewater by electrocoagulation process: Application of Box–Behnken design (BBD) , 2015 .

[12]  Andrea R. Gerson,et al.  Optimization of COD decrease from tobacco wastewater by Ca/Mg/Al coagulant using RSM , 2015 .

[13]  António Pereira,et al.  Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy , 2010 .

[14]  Jiju Antony,et al.  Application of design of experiments to a spot welding process , 2003 .

[15]  Saied Darwish,et al.  Micro-hardness of spot welded (B.S. 1050) commercial aluminium as correlated with welding variables and strength attributes , 1999 .

[16]  A. Khataee,et al.  Preparation of a novel γ-FeOOH-GAC nano composite for decolorization of textile wastewater by photo Fenton-like process in a continuous reactor , 2014 .

[17]  Abdelkader Anouzla,et al.  Colour and COD removal of disperse dye solution by a novel coagulant: application of statistical design for the optimization and regression analysis. , 2009, Journal of hazardous materials.

[18]  Thomas W. Eagar,et al.  Resistance spot welding of galvanized steel: Part II. Mechanisms of spot weld nugget formation , 1986 .

[19]  Caiping Liang,et al.  Strength prediction of sheet to tube single sided resistance spot welding , 2009 .

[20]  B. Carlson,et al.  Fracture mechanisms of Al/steel resistance spot welds in lap shear test , 2017 .

[21]  H.-L. Lin,et al.  Optimization of resistance spot welding process using taguchi method and a neural network , 2007 .

[22]  Pedro Paulo Balestrassi,et al.  Multivariate Normal Boundary Intersection based on rotated factor scores: A multiobjective optimization method for methyl orange treatment , 2017 .

[23]  Dawei Zhao,et al.  Weld quality monitoring research in small scale resistance spot welding by dynamic resistance and neural network , 2017 .

[24]  Majid Pouranvari,et al.  Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel , 2009 .

[25]  Zhen Luo,et al.  Resistance spot welding of Mg to electro-galvanized steel with hot-dip galvanized steel interlayer , 2016 .

[26]  Zhen Luo,et al.  Joining aluminum alloy 5052 sheets via novel hybrid resistance spot clinching process , 2017 .