Tele-Impedance based stiffness and motion augmentation for a knee exoskeleton device

In this paper, a knee exoskeleton device and its Tele-Impedance based assistive control scheme is presented. The exoskeleton device is an inherently compliant actuated system that was implemented based on the series elastic actuation (SEA) to provide improved and intrinsically soft interaction behaviour. Details of the exoskeleton design are presented. A detailed musculoskeletal model was developed and experimentally identified in order to map electromyographic signals to the antagonistic muscle torques, acting on the human knee joint. The estimated muscle torques are used in order to determine the user's intent and joint stiffness trend. These reference signals are exploited by a novel Tele-Impedance controller which is applied to a knee exoskeleton device to provide assistance and stiffness augmentation to the user's knee joint. Experimental trials of a standing-up motion task were carried out for evaluation of the proposed control strategy. The results indicate that the proposed knee exoskeleton device and control scheme can effectively generate assistive actions that are intrinsically and naturally controlled by the user muscle activity.

[1]  Nikos G. Tsagarakis,et al.  A Novel Actuator with Reconfigurable Stiffness for a Knee Exoskeleton: Design and Modeling , 2012 .

[2]  Nikolaos G. Tsagarakis,et al.  Safe human robot interaction via energy regulation control , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[3]  Günter Hommel,et al.  A Human--Exoskeleton Interface Utilizing Electromyography , 2008, IEEE Transactions on Robotics.

[4]  Nikolaos G. Tsagarakis,et al.  Tele-impedance: Towards transferring human impedance regulation skills to robots , 2012, 2012 IEEE International Conference on Robotics and Automation.

[5]  K N An,et al.  Determination of muscle orientations and moment arms. , 1984, Journal of biomechanical engineering.

[6]  F. Zajac Muscle and tendon: properties, models, scaling, and application to biomechanics and motor control. , 1989, Critical reviews in biomedical engineering.

[7]  Jerry E Pratt,et al.  Design and evaluation of Mina: A robotic orthosis for paraplegics , 2011, 2011 IEEE International Conference on Rehabilitation Robotics.

[8]  Bram Vanderborght,et al.  An exoskeleton for gait rehabilitation: Prototype design and control principle , 2008, 2008 IEEE International Conference on Robotics and Automation.

[9]  Nikolaos G. Tsagarakis,et al.  Tele-impedance: Teleoperation with impedance regulation using a body–machine interface , 2012, Int. J. Robotics Res..

[10]  M. Bobbert,et al.  Length and moment arm of human leg muscles as a function of knee and hip-joint angles , 2004, European Journal of Applied Physiology and Occupational Physiology.

[11]  M. Goldfarb,et al.  Preliminary Evaluation of a Powered Lower Limb Orthosis to Aid Walking in Paraplegic Individuals , 2011, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[12]  Yoshiyuki Sankai,et al.  Power assist control for walking aid with HAL-3 based on EMG and impedance adjustment around knee joint , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[13]  Rieko Osu,et al.  Short- and long-term changes in joint co-contraction associated with motor learning as revealed from surface EMG. , 2002, Journal of neurophysiology.

[14]  D. A. Shreeve,et al.  An evaluation of optimization techniques for the prediction of muscle activation patterns during isometric tasks. , 1996, Journal of biomechanical engineering.

[15]  H. Herr,et al.  Adaptive control of a variable-impedance ankle-foot orthosis to assist drop-foot gait , 2004, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[16]  M. Munih,et al.  Analysis of standing up and sitting down in humans: definitions and normative data presentation. , 1990, Journal of biomechanics.

[17]  Boubaker Daachi,et al.  Adaptive control of a human-driven knee joint orthosis , 2012, 2012 IEEE International Conference on Robotics and Automation.

[18]  Paolo Bonato,et al.  Design and control of a robotic lower extremity exoskeleton for gait rehabilitation , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[19]  Yasuhisa Hasegawa,et al.  Sit-to-Stand and Stand-to-Sit Transfer Support for Complete Paraplegic Patients with Robot Suit HAL , 2010, Adv. Robotics.

[20]  D. G. Caldwell,et al.  Design, modeling and control of a series elastic actuator for an assistive knee exoskeleton , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[21]  H. Kazerooni,et al.  Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX) , 2006, IEEE/ASME Transactions on Mechatronics.

[22]  D. Lloyd,et al.  An EMG-driven musculoskeletal model to estimate muscle forces and knee joint moments in vivo. , 2003, Journal of biomechanics.