A single energy-based parameter to assess protection capability of debris shields

Abstract Protecting spacecraft structures against hypervelocity impacts (HVIs) of space debris, which may cause fatal damage to the spacecraft structures, has received wide attention. In this paper, the numerical simulation of hypervelocity solid–solid impacts is conducted and an energy-based parameter to assess protection capability of debris shields is proposed. To numerically simulate the hypervelocity impact phenomena, a two-dimensional improved smoothed particle hydrodynamics (SPH) method with new particle generation and particle merger techniques is used. The spatial and temporal distributions of the kinetic energy flux density of a debris cloud at the position of the upper surface of a pressure wall are calculated, and the correlation between the kinetic energy of the debris cloud and the deformation and fracture behavior of the pressure wall is discussed. Finally, based on the maximum value of the total kinetic energy of debris cloud per unit area at the position of the upper surface of a pressure wall, an energy-based parameter to assess protection capability of debris shields is proposed.

[1]  H. Sekine,et al.  Numerical simulation of hypervelocity impacts of a projectile on laminated composite plate targets by means of improved SPH method , 2004 .

[2]  Hideki Sekine,et al.  Proposal of New Particle Generation Technique in SPH Analysis of Hypervelocity Impacts. , 2002 .

[3]  Roberto Destefanis,et al.  Ballistic limit evaluation of advanced shielding using numerical simulations , 2001 .

[4]  S. A. Medin,et al.  Improvements in SPH method by means of interparticle contact algorithm and analysis of perforation tests at moderate projectile velocities , 2000 .

[5]  Jonas A. Zukas,et al.  High velocity impact dynamics , 1990 .

[6]  L. Libersky,et al.  High strain Lagrangian hydrodynamics: a three-dimensional SPH code for dynamic material response , 1993 .

[7]  K. Thoma,et al.  Computational simulation of the hypervelocity impact of al-spheres on thin plates of different materials , 1997 .

[8]  Theodore C. Carney,et al.  High-velocity impact of graphite/epoxy composite laminates , 1997 .

[9]  Kimiya Komurasaki,et al.  Numerical Simulation on Multiphase Deformation Caused by a Hyper-Velocity Impact. , 1997 .

[10]  Hideki Sekine,et al.  Numerical Analysis of Hypervelocity Solid-Solid Impacts by Means of Improved SPH Method Using New Particle Generation and Particle Reducing Techniques. , 2002 .

[11]  Larry D. Libersky,et al.  Smooth particle hydrodynamics with strength of materials , 1991 .

[12]  C. Hayhurst,et al.  Cylindrically symmetric SPH simulations of hypervelocity impacts on thin plates , 1997 .

[13]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .

[14]  P. W. Randles,et al.  Calculation of oblique impact and fracture of tungsten cubes using smoothed particle hydrodynamics , 1995 .

[15]  L. Libersky,et al.  Smoothed Particle Hydrodynamics: Some recent improvements and applications , 1996 .