Numerical Simulation of Gas Exchange in Fresh-keeping Transportation Containers with a Controlled Atmosphere

[1]  H. M. Hoang,et al.  Preliminary study of airflow and heat transfer in a cold room filled with apple pallets: Comparison between two modelling approaches and experimental results , 2015 .

[2]  C. James,et al.  Modelling of food transportation systems - a review , 2006 .

[3]  H. M. Hoang,et al.  Simplified heat transfer modeling in a cold room filled with food products , 2015 .

[4]  Guo Jiaming,et al.  Experiment on regulation characteristics of high pressure humidifying system for fresh-keeping transportation , 2011 .

[5]  Cheuk Ming Mak,et al.  Determination of single-sided ventilation rates in multistory buildings: Evaluation of methods , 2014 .

[6]  Thijs Defraeye,et al.  Forced-convective cooling of citrus fruit: Cooling conditions and energy consumption in relation to package design , 2014 .

[7]  P. Verboven,et al.  Optimization of the humidification of cold stores by pressurized water atomizers based on a multiscale CFD model , 2009 .

[8]  S. Touber,et al.  Distributed dynamic modelling of a refrigerated room , 1990 .

[9]  Thijs Defraeye,et al.  Forced-convective cooling of citrus fruit: package design , 2013 .

[10]  Jalal Dehghannya,et al.  Mathematical modeling of airflow and heat transfer during forced convection cooling of produce considering various package vent areas , 2011 .

[11]  Mustafa Tutar,et al.  Computational modeling of airflow patterns and heat transfer prediction through stacked layers' products in a vented box during cooling , 2009 .

[12]  R. Besant,et al.  Numerical modeling of fluid flow and coupled heat and mass transfer in a counter-cross-flow parallel-plate liquid-to-air membrane energy exchanger , 2015 .

[13]  K. Ramesh,et al.  Aerodynamic performance analysis of a non-planar C-wing using CFD , 2015 .

[14]  G. Lipscomb,et al.  Food sustainability by designing and modelling a membrane controlled atmosphere storage system , 2013 .

[15]  Jochen Mellmann,et al.  Studying airflow and heat transfer characteristics of a horticultural produce packaging system using a 3-D CFD model. Part II: Effect of package design , 2013 .

[16]  X. Qi,et al.  Experimental and Numerical Studies of Aerodynamic Performance of Trucks , 2011 .

[17]  Pramod V. Mahajan,et al.  Extended storage life of litchi fruit using controlled atmosphere and low temperature , 2005 .

[18]  Yi Li,et al.  Accelerated loosely-coupled CFD/CSD method for nonlinear static aeroelasticity analysis , 2010 .

[19]  Jochen Mellmann,et al.  Studying airflow and heat transfer characteristics of a horticultural produce packaging system using a 3-D CFD model. Part I: Model development and validation , 2013 .

[20]  Savvas A. Tassou,et al.  Modelling the environment within a wet air-cooled vegetable store , 1998 .

[21]  F. Tanaka,et al.  Temperature Dependency of Gas Diffusivity and Skin Resistance of Japanese Pear (‘Oushuu’) Based on the Fruit's True 3D Geometry , 2014 .

[22]  Tridib Kumar Goswami,et al.  CFD simulation of effects of operating parameters and product on heat transfer and moisture loss in the stack of bagged potatoes , 2007 .

[23]  Denis Flick,et al.  Airflow patterns inside slotted obstacles in a ventilated enclosure , 2007 .

[24]  A. M. Foster,et al.  Effectiveness and optimum jet velocity for a plane jet air curtain used to restrict cold room infiltration , 2006 .

[25]  Denis Flick,et al.  Temperature prediction in domestic refrigerators: Deterministic and stochastic approaches , 2010 .

[26]  P. Verboven,et al.  CFD model development and validation of a thermonebulisation fungicide fogging system for postharvest storage of fruit , 2012 .

[27]  Shahrzad Parto,et al.  Natural ventilation, efficient way to organize architectural space , 2012 .

[28]  Denis Flick,et al.  Heat transfer modelling in a ventilated cavity loaded with food product: Application to a refrigerated vehicle , 2012 .

[29]  C. Mészáros,et al.  Modeling Condensation and Evaporation on Fruit Surface , 2007 .

[30]  S. Ho,et al.  Comparison of underfloor and overhead air distribution systems in an office environment , 2011 .

[31]  Muhammad M. Rahman,et al.  Numerical simulation of temperature and velocity in a refrigerated warehouse , 2010 .

[32]  M. Zavid Iqbal Bangalee,et al.  Effects of Lateral Window Position and Wind Direction on Wind-Driven Natural Cross Ventilation of a Building: A Computational Approach , 2014, J. Comput. Eng..

[33]  R. P. Singh,et al.  Modeling the forced-air cooling process of fresh strawberry packages, Part I: Numerical model , 2009 .

[34]  P. Verboven,et al.  A continuous/discrete simulation of controlled atmosphere (CA) cool storage systems: evaluation of plant performance/design and product quality evolution , 2005 .

[35]  J. McLaughlin.  Aerosol particle deposition in numerically simulated channel flow , 1989 .

[37]  Shaojin Wang,et al.  SE—Structures and Environment: Convective and Ventilation Transfers in Greenhouses, Part 2: Determination of the Distributed Greenhouse Climate , 2002 .

[38]  Denis Flick,et al.  Airflow patterns in an enclosure loaded with slotted pallets , 2006 .

[39]  Denis Flick,et al.  Airflow pattern and temperature distribution in a typical refrigerated truck configuration loaded with pallets , 2004 .