Effects of variation in perfusion rates and of perfusion models in computational models of radio frequency tumor ablation.

PURPOSE Finite element method (FEM) models are commonly used to simulate radio frequency (RF) tumor ablation. Prior FEM models of RF ablation have either ignored the temperature dependent effect of microvascular perfusion, or implemented the effect using simplified algorithms to reduce computational complexity. In this FEM modeling study, the authors compared the effect of different microvascular perfusion algorithms on ablation zone dimensions with two commercial RF electrodes in hepatic tissue. They also examine the effect of tissue type and inter-patient variation of perfusion on ablation zone dimensions. METHODS AND MATERIALS The authors created FEM models of an internally cooled and multi-tined expandable electrode. RF voltage was applied to both electrodes (for 12 or 15 min, respectively) such that the maximum temperature in the model was 105 degrees C. Temperature dependent microvascular perfusion was implemented using three previously reported methodologies: cessation above 60 degrees C, a standard first-order Arrhenius model with decreasing perfusion with increasing degree of vascular stasis, and an Arrhenius model that included the effects of increasing perfusion at the ablation zone boundary due to hyperemia. To examine the effects of interpatient variation, simulations were performed with base line and +/-1 standard deviation values of perfusion. The base line perfusion was also varied to simulate the difference between normal and cirrhotic liver tissue. RESULTS The ablation zone volumes with the cessation above 60 degrees C perfusion algorithm and with the more complex Arrhenius model were up to 70% and 25% smaller, respectively, compared to the standard Arrhenius model. Ablation zone volumes were up to 175% and approximately 100% different between the simulations where -1 and +1 standard deviation values of perfusion were used in normal and cirrhotic liver tissue, respectively. CONCLUSIONS The choice of microvascular perfusion algorithm has significant effects on final ablation zone dimensions in FEM models of RF ablation. The authors also found that both interpatient variation in base line tissue perfusion and the reduction in perfusion due to cirrhosis have considerable effect on ablation zone dimensions.

[1]  J. Rhee,et al.  Implication of Blood Flow in Hyperthermic Treatment of Tumors , 1984, IEEE Transactions on Biomedical Engineering.

[2]  Jonathan W. Valvano,et al.  Thermal conductivity and diffusivity of biomaterials measured with self-heated thermistors , 1985 .

[3]  Francis A. Duck,et al.  Thermal Properties of Tissue , 1990 .

[4]  J W Hunt,et al.  Differential thermal sensitivity of tumour and normal tissue microvascular response during hyperthermia. , 1992, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[5]  H. Arkin,et al.  Recent developments in modeling heat transfer in blood perfused tissues , 1994, IEEE Transactions on Biomedical Engineering.

[6]  J. Hunt,et al.  Blood flow cooling and ultrasonic lesion formation. , 1996, Medical physics.

[7]  Steven L. Jacques,et al.  Nonlinear finite-element analysis of the role of dynamic changes in blood perfusion and optical properties in laser coagulation of tissue , 1996 .

[8]  I. Yaroslavsky,et al.  Treatment planning for MRI‐guided laser‐induced interstitial thermotherapy of brain tumors—The role of blood perfusion , 1998, Journal of magnetic resonance imaging : JMRI.

[9]  E F Halpern,et al.  Radio-frequency tissue ablation: effect of pharmacologic modulation of blood flow on coagulation diameter. , 1998, Radiology.

[10]  L Solbiati,et al.  Percutaneous radiofrequency tissue ablation: does perfusion-mediated tissue cooling limit coagulation necrosis? , 1998, Journal of vascular and interventional radiology : JVIR.

[11]  H. H. Pennes Analysis of tissue and arterial blood temperatures in the resting human forearm. 1948. , 1948, Journal of applied physiology.

[12]  M. Seebass,et al.  Impact of nonlinear heat transfer on temperature control in regional hyperthermia , 1999, IEEE Transactions on Biomedical Engineering.

[13]  L. Zhu,et al.  Evaluation of the effectiveness of transurethral radio frequency hyperthermia in the canine prostate: temperature distribution analysis. , 1999, Journal of biomechanical engineering.

[14]  W. Mali,et al.  PTA: Good Enough in the Iliac Arteries? , 1999 .

[15]  R Materne,et al.  Hepatic perfusion parameters in chronic liver disease: dynamic CT measurements correlated with disease severity. , 2001, AJR. American journal of roentgenology.

[16]  J S Lewin,et al.  How does alteration of hepatic blood flow affect liver perfusion and radiofrequency‐induced thermal lesion size in rabbit liver? , 2001, Journal of magnetic resonance imaging : JMRI.

[17]  Li Su,et al.  Computer-aided dynamic simulation of microwave-induced thermal distribution in coagulation of liver cancer , 2001, IEEE Trans. Biomed. Eng..

[18]  J. McGahan,et al.  Radiofrequency ablation of the liver: current status. , 2001, AJR. American journal of roentgenology.

[19]  John G. Webster,et al.  Hepatic bipolar radio-frequency ablation between separated multiprong electrodes , 2001, IEEE Transactions on Biomedical Engineering.

[20]  S. Goldberg,et al.  Dynamic intrahepatic flow and cellular alterations during radiofrequency ablation of liver tissue in mice. , 2001, Journal of vascular and interventional radiology : JVIR.

[21]  James Sayre,et al.  Effect of vessel size on creation of hepatic radiofrequency lesions in pigs: assessment of the "heat sink" effect. , 2002, AJR. American journal of roentgenology.

[22]  John G. Webster,et al.  Finite-element analysis of hepatic multiple probe radio-frequency ablation , 2002, IEEE Transactions on Biomedical Engineering.

[23]  Radio-frequency ablation of renal cell carcinoma , 2002 .

[24]  Hong Cao,et al.  Three-dimensional finite-element analyses for radio-frequency hepatic tumor ablation , 2002, IEEE Trans. Biomed. Eng..

[25]  John G. Webster,et al.  Hepatic radiofrequency ablation with internally cooled probes: effect of coolant temperature on lesion size , 2003, IEEE Transactions on Biomedical Engineering.

[26]  Pierre Schnyder,et al.  Radio-frequency tissue ablation of the liver: in vivo and ex vivo experiments with four different systems , 2003, European Radiology.

[27]  J. C. Kumaradas,et al.  Edge-element based finite element analysis of microwave hyperthermia treatments for superficial tumours on the chest wall , 2003, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[28]  Percutaneous ultrasound-guided radio frequency ablation of HCC and liver metastases: results and long-term 7-year follow-up , 2003 .

[29]  K Giese,et al.  Implementation of a practical model for light and heat distribution using laser-induced thermotherapy near to a large vessel. , 2003, Physics in medicine and biology.

[30]  Isaac Chang,et al.  Finite Element Analysis of Hepatic Radiofrequency Ablation Probes using Temperature-Dependent Electrical Conductivity , 2003, Biomedical engineering online.

[31]  S. Mulier,et al.  Size and geometry of hepatic radiofrequency lesions. , 2003, European journal of surgical oncology : the journal of the European Society of Surgical Oncology and the British Association of Surgical Oncology.

[32]  Andres Rahal,et al.  Radiofrequency ablation of hepatic tumors: variability of lesion size using a single ablation device. , 2004, AJR. American journal of roentgenology.

[33]  P. Wolf,et al.  A Three-Dimensional Finite Element Model of Radiofrequency Ablation with Blood Flow and its Experimental Validation , 2000, Annals of Biomedical Engineering.

[34]  Gerald M. Saidel,et al.  Thermal Model for Fast Simulation During Magnetic Resonance Imaging Guidance of Radio Frequency Tumor Ablation , 2004, Annals of Biomedical Engineering.

[35]  J C Bischof,et al.  Investigation of the thermal and tissue injury behaviour in microwave thermal therapy using a porcine kidney model , 2004, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[36]  Uyen D. Nguyen,et al.  Thermal modeling of lesion growth with radiofrequency ablation devices , 2004, Biomedical engineering online.

[37]  D. Gervais,et al.  Radiofrequency ablation of renal cell carcinoma , 2005, Abdominal Imaging.

[38]  Sammy Saab,et al.  Percutaneous radiofrequency ablation of hepatocellular carcinoma as a bridge to liver transplantation , 2005, Hepatology.

[39]  S. M. Lobo,et al.  Radiofrequency tumor ablation: insight into improved efficacy using computer modeling. , 2005, AJR. American journal of roentgenology.

[40]  A R Gillams,et al.  The use of radiofrequency in cancer , 2005, British Journal of Cancer.

[41]  F. Lee,et al.  Radiofrequency versus microwave ablation in a hepatic porcine model. , 2005, Radiology.

[42]  R E Lenkinski,et al.  RF tumour ablation: Computer simulation and mathematical modelling of the effects of electrical and thermal conductivity , 2005, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[43]  E. J. Woo,et al.  Thermal—electrical finite element modelling for radio frequency cardiac ablation: Effects of changes in myocardial properties , 2000, Medical and Biological Engineering and Computing.

[44]  Image-guided radiofrequency ablation of liver malignancies: experience at Singapore General Hospital. , 2006, Annals of the Academy of Medicine, Singapore.

[45]  Enrique J Berjano,et al.  Theoretical modeling for radiofrequency ablation: state-of-the-art and challenges for the future , 2006, Biomedical engineering online.

[46]  J. G. Webster,et al.  Hepatic bipolar radiofrequency ablation creates coagulation zones close to blood vessels: A finite element study , 2003, Medical and Biological Engineering and Computing.

[47]  Dieter Haemmerich,et al.  Contribution of Direct Heating, Thermal Conduction and Perfusion During Radiofrequency and Microwave Ablation , 2007, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[48]  John G. Webster,et al.  Expanding the Bioheat Equation to Include Tissue Internal Water Evaporation During Heating , 2007, IEEE Transactions on Biomedical Engineering.

[49]  R. McTaggart,et al.  Thermal ablation of lung tumors. , 2007, Techniques in vascular and interventional radiology.

[50]  Radio-frequency ablation of liver tumor , 2007 .

[51]  Prasanna Hariharan,et al.  Radio-frequency ablation in a realistic reconstructed hepatic tissue. , 2007, Journal of biomechanical engineering.

[52]  B. Debuire,et al.  New perspectives and strategy research biomarkers for hepatocellular carcinoma , 2007, Clinical chemistry and laboratory medicine.

[53]  Michael S. Breen,et al.  MRI-guided Thermal Ablation Therapy: Model and Parameter Estimates to Predict Cell Death from MR Thermometry Images , 2007, Annals of Biomedical Engineering.

[54]  S. Goldberg,et al.  Computer modeling of the effect of perfusion on heating patterns in radiofrequency tumor ablation , 2007, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.