Demand side management of a run-of-mine ore milling circuit

Abstract Increasing electricity costs coupled with lower prices for some metals such as platinum group metals require a reevaluation of the operation of grinding processes. Demand side management (DSM) has received increasing attention in the field of industrial control as an opportunity to reduce operating costs. DSM through grinding mill power load shifting is presented in this paper using model predictive control and a real-time optimizer. Simulation results indicate that mill power load shifting can potentially achieve cost reductions of $9.90 per kg of unrefined product when applied to a run-of-mine (ROM) ore milling circuit processing platinum bearing ore. DSM is however still not economically feasible when there is a demand to continuously run the milling circuit at maximum throughput.

[1]  A. J. Niemi,et al.  Model predictive control for grinding systems , 1995 .

[2]  K. S. Brooks,et al.  A Holistic Approach to Control and Optimization of an Industrial Run-Of-Mine Ball Milling Circuit , 2010 .

[3]  R. D. Morrison,et al.  JKSimMet: A simulator for analysis, optimisation and design of comminution circuits , 2002 .

[4]  Ian K. Craig,et al.  Combined neural network and particle filter state estimation with application to a run-of-mine ore mill , 2013 .

[5]  Ian K. Craig,et al.  Model-plant mismatch detection and model update for a run-of-mine ore milling circuit under model predictive control ☆ , 2013 .

[6]  R. P. King,et al.  The control of pebble mills at Buffelsfontein Gold Mine by use of a multivariable peak-seeking controller , 1985 .

[7]  Malcolm Powell,et al.  Developments in the understanding of South African style SAG mills , 2001 .

[8]  Ian K. Craig,et al.  Specification framework for robust control of a run-of-mine ore milling circuit , 1995 .

[9]  F. Sioshansi.  Demand-side management: The third wave , 1995 .

[10]  Ian Postlethwaite,et al.  Multivariable Feedback Control: Analysis and Design , 1996 .

[11]  Peter Palensky,et al.  Demand Side Management: Demand Response, Intelligent Energy Systems, and Smart Loads , 2011, IEEE Transactions on Industrial Informatics.

[12]  Thomas F. Edgar,et al.  Process Dynamics and Control , 1989 .

[13]  H. Unbehauen,et al.  Nonlinear predictive control with multirate optimisation step lengths , 2005 .

[14]  Ian K. Craig,et al.  Fractional order and BICO disturbance observers for a run-of-mine ore milling circuit , 2012 .

[15]  Malcolm Powell,et al.  Applying grindcurves to mill operation and optimisation , 2009 .

[16]  Qi Li,et al.  Constrained model predictive control in ball mill grinding process , 2008 .

[17]  K. Najim,et al.  Adaptive control: state of the art and an application to a grinding process , 1995 .

[18]  Michael Borell,et al.  Supervisory control of autogenous grinding circuits , 1996 .

[19]  Ian K. Craig,et al.  Grinding Mill Circuits - A Survey of Control and Economic Concerns , 2008 .

[20]  Marappagounder Ramasamy,et al.  Control of ball mill grinding circuit using model predictive control scheme , 2005 .

[21]  Ian K. Craig,et al.  Analysis and validation of a run-of-mine ore grinding mill circuit model for process control , 2013 .

[22]  Jun Yang,et al.  Disturbance rejection of ball mill grinding circuits using DOB and MPC , 2010 .

[23]  K. S. Brooks,et al.  A Holistic Approach to Control and Optimization of an Industrial R Ball Milling Circuit , 2010 .

[24]  Daniel Hodouin,et al.  Methods for automatic control, observation, and optimization in mineral processing plants , 2011 .

[25]  Ian K. Craig,et al.  Economic performance assessment of two ROM ore milling circuit controllers , 2009 .

[26]  D. G. Hulbert,et al.  Multivariable control of a wet‐grinding circuit , 1983 .

[27]  Shihua Li,et al.  Application of model predictive control in ball mill grinding circuit , 2007 .

[28]  V. R. Radhakrishnan.  Model based supervisory control of a ball mill grinding circuit , 1999 .

[29]  Yuling Tang,et al.  Optimal Control of Operation Efficiency of Belt Conveyor , 2011, 2011 Asia-Pacific Power and Energy Engineering Conference.

[30]  Yuling Tang,et al.  Optimal control approaches of pumping stations to achieve energy efficiency and load shifting , 2014 .

[31]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[32]  D. G. Hulbert,et al.  Multivariable Control of an Industrial Grinding Circuit , 1980 .

[33]  C.W. Gellings,et al.  The concept of demand-side management for electric utilities , 1985, Proceedings of the IEEE.

[34]  Daniel Hodouin,et al.  Constrained real-time optimization of a grinding circuit using steady-state linear programming supervisory control , 2002 .

[35]  Eric C. Kerrigan,et al.  Robust Nonlinear Model Predictive Control of a Run-of-Mine Ore Milling Circuit , 2010, IEEE Transactions on Control Systems Technology.

[36]  Werner Badenhorst,et al.  Optimal hoist scheduling of a deep level mine twin rock winder system for demand side management , 2011 .

[37]  J. Zhang,et al.  A model predictive control strategy for load shifting in a water pumping scheme with maximum demand charges , 2009, 2009 IEEE Bucharest PowerTech.

[38]  James C. Hung.  Dynamic Matrix Control , 2011 .

[39]  Donghui Wei,et al.  Development of performance functions for economic performance assessment of process control systems , 2009, AFRICON 2009.

[40]  Raj K. Rajamani,et al.  Optimal control of a ball mill grinding circuit—II. Feedback and optimal control , 1991 .

[41]  David Q. Mayne,et al.  Constrained model predictive control: Stability and optimality , 2000, Autom..

[42]  Raj K. Rajamani,et al.  Optimal control of a ball mill grinding circuit—I. Grinding circuit modeling and dynamic simulation , 1991 .

[43]  S. Morrell.  A new autogenous and semi-autogenous mill model for scale-up, design and optimisation , 2004 .

[44]  D. J. McKee,et al.  Automatic flotation control- a review of 20 years of effort , 1991 .

[45]  Ian K. Craig,et al.  Dual particle filters for state and parameter estimation with application to a run-of-mine ore mill , 2012 .

[46]  Ian K. Craig,et al.  Economic assessment of advanced process control – A survey and framework , 2008 .

[47]  Jiangfeng Zhang,et al.  An optimal control model for load shifting—with application in the energy management of a colliery , 2009 .

[48]  Bernard Muller,et al.  Development of a model predictive controller for a milling circuit , 2000 .

[49]  Timothy J. Napier-Munn,et al.  Two empirical hydrocyclone models revisited , 2003 .

[50]  Fengnian Shi,et al.  Effects of slurry rheology on industrial grinding performance , 2002 .

[51]  L. C. Coetzee,et al.  Robust nonlinear model predictive control of a closed run-of-mine ore milling circuit , 2009 .

[52]  Ian K. Craig,et al.  Reducing the number of size classes in a cumulative rates model used for process control of a grinding mill circuit , 2013 .