Lamb wave interaction with adhesively bonded stiffeners and disbonds using 3D vibrometry

There are many advantages to adhesively bonding stiffeners onto aircraft structures rather than using traditional mechanical fastening methods. However there is a lack of confidence of the structural integrity of adhesively bonded joints over time. Acousto-ultrasonic Lamb waves have shown great potential in structural health monitoring applications in both metallic and composite structures. This paper presents an experimental investigation of the use of acousto-ultrasonic Lamb waves for the monitoring of adhesively bonded joints in metallic structures using 3D scanning laser vibrometry. Two stiffened panels were manufactured, one with an intentional disbonded region. Lamb wave interaction with the healthy and disbonded stiffeners was investigated at three excitation frequencies. A windowed root-mean-squared technique was applied to quantify where Lamb wave energy was reflected, attenuated and transmitted across the structure enabling the size and shape of the defect to be visualised which was verified by traditional ultrasonic inspection techniques.

[1]  Mark Eaton.  Acoustic Emission (AE) monitoring of buckling and failure in carbon fibre composite structures. , 2007 .

[2]  Fabrizio Scarpa,et al.  Structural health monitoring using scanning laser vibrometry: I. Lamb wave sensing , 2004 .

[3]  Holger Speckmann,et al.  Structural Health Monitoring: A Contribution to the Intelligent Aircraft Structure , 2006 .

[4]  Hoon Sohn,et al.  Automated detection of delamination and disbond from wavefield images obtained using a scanning laser vibrometer , 2011 .

[5]  B W Drinkwater,et al.  The detectability of kissing bonds in adhesive joints using ultrasonic techniques. , 2003, Ultrasonics.

[6]  Yves H. Berthelot,et al.  Mode analyses of laser-generated transient ultrasonic Lamb waveforms in a composite plate by wavelet transform , 1999 .

[7]  Edward M. Petrie,et al.  Adhesives for the assembly of aircraft structures and components , 2008 .

[8]  Marek Krawczuk,et al.  Damage localisation in a stiffened plate structure using a propagating wave , 2013 .

[9]  Karen Margaret Holford,et al.  On the Development of a Damage Detection System using Macro-fibre Composite Sensors , 2012 .

[10]  A. Higgins.  Adhesive bonding of aircraft structures , 2000 .

[11]  M. Lemistre,et al.  Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing , 2001 .

[12]  Stephen D Holland,et al.  Reflection and transmission of guided ultrasonic plate waves by vertical stiffeners. , 2014, The Journal of the Acoustical Society of America.

[13]  H. Lamb.  On waves in an elastic plate , 1917 .

[14]  Fabrizio Scarpa,et al.  Structural health monitoring using scanning laser vibrometry: III. Lamb waves for fatigue crack detection , 2004 .

[15]  W. Staszewski,et al.  Sensor location studies for damage detection with Lamb waves , 2007 .

[16]  Robert D. Adams,et al.  Nondestructive testing of adhesively-bonded joints , 1997 .

[17]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[18]  Younho Cho,et al.  Estimation of ultrasonic guided wave mode conversion in a plate with thickness variation , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[19]  T.H.G. Megson,et al.  Aircraft structures for engineering students , 1972 .

[20]  K. Palanikumar,et al.  Delamination Analysis in Drilling of CFRP Composites Using Response Surface Methodology , 2009 .

[21]  Sergey V Shkarayev,et al.  Analysis of composite laminates with multiple fasteners , 1998 .

[22]  Krishnan Balasubramaniam,et al.  Interaction of Lamb mode (A(o)) with structural discontinuity and generation of "Turning modes" in a T-joint. , 2011, Ultrasonics.

[23]  S. Rokhlin.  Lamb wave interaction with lap-shear adhesive joints : theory and experiment , 1991 .

[24]  I. A. Viktorov.  Rayleigh and Lamb Waves: Physical Theory and Applications , 1967 .

[25]  Xin Wang,et al.  Tool wear of coated drills in drilling CFRP , 2013 .

[26]  R Lammering,et al.  Numerical simulation of elastic wave propagation in isotropic media considering material and geometrical nonlinearities , 2015 .

[27]  J. M. Arenas,et al.  Considerations for the industrial application of structural adhesive joints in the aluminium–composite material bonding , 2013 .

[28]  Yi Liu,et al.  Methods to reduce direct maintenance costs for commercial aircraft , 2004 .

[29]  D. Bond,et al.  Principles and practices of adhesive bonded structural joints and repairs , 1999 .

[30]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[31]  H. Assler,et al.  DESIGN OF AIRCRAFT STRUCTURES UNDER SPECIAL CONSIDERATION OF NDT , 2004 .

[32]  A. Rothwell,et al.  Aircraft structures for engineering students (3rd edition): T.H.G. Megson; Arnold, London, 1999, ISBN 0 340 70588 4 (paperback) , 2001 .

[33]  P. Theobald,et al.  A conical piezoelectric transducer with integral sensor as a self-calibrating acoustic emission energy source. , 2004, Ultrasonics.

[34]  Hoon Sohn,et al.  Computational Lamb wave model validation using 1D and 3D laser vibrometer measurements , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[35]  Philippe Micheau,et al.  Methodology for optimal configuration in structural health monitoring of composite bonded joints , 2012 .