Application of high temperature superconductor to improve the dynamic performance of WECS

Doubly Fed Induction Generators (DFIGs) are currently extensively used in variable speed wind power plants due to their superior advantages that include reduced converter rating, low cost, reduced losses, easy implementation of power factor correction schemes, variable speed operation and four quadrant active and reactive power control capabilities. On the other hand, DFIG sensitivity to grid disturbances, especially for voltage sags represents the main disadvantage of the equipment. In this paper, a high temperature superconductor (HTSC) is proposed to be integrated within the DFIG converters to improve the overall performance of a DFIG-based wind energy conversion system (WECS). A fuzzy logic (FL) to control the charging and discharging of the high temperature superconductor is introduced. Simulation results reveal the effectiveness of the proposed HTSC in improving the dynamic performance of WECS under study.

[1]  Luis Marroyo,et al.  Ride Through of Wind Turbines With Doubly Fed Induction Generator Under Symmetrical Voltage Dips , 2009, IEEE Transactions on Industrial Electronics.

[2]  A. Abu-Siada,et al.  Application of STATCOM to improve the high-voltage-ride-through capability of wind turbine generator , 2011, 2011 IEEE PES Innovative Smart Grid Technologies.

[3]  A. Y. Abdelaziz,et al.  Investigation of electrical dynamics of DFIG-based wind turbines during severe symmetrical grid voltage dips , 2012, 2012 International Conference on Engineering and Technology (ICET).

[4]  A. Abu-Siada,et al.  Application of SMES unit to improve the overall performance of DFIG-based WECS , 2014, 2014 IEEE PES General Meeting | Conference & Exposition.

[5]  Bin Wu,et al.  An Overview of SMES Applications in Power and Energy Systems , 2010, IEEE Transactions on Sustainable Energy.

[6]  M Mohseni,et al.  Enhanced Hysteresis-Based Current Regulators in Vector Control of DFIG Wind Turbines , 2011, IEEE Transactions on Power Electronics.

[7]  A. M. S. Yunus,et al.  Application of UPFC to improve the LVRT capability of wind turbine generator , 2012, 2012 22nd Australasian Universities Power Engineering Conference (AUPEC).

[8]  Li Wang,et al.  Stability Analysis of an Integrated Offshore Wind and Seashore Wave Farm Fed to a Power Grid Using a Unified Power Flow Controller , 2013, IEEE Transactions on Power Systems.

[9]  A. Abu-Siada,et al.  Improvement of DFIG-based WECS performance using SMES unit , 2013, 2013 Australasian Universities Power Engineering Conference (AUPEC).

[10]  R. M. M. Pereira,et al.  Comparative study of STATCOM and SVC performance on Dynamic Voltage Collapse of an Electric Power System with Wind Generation , 2014, IEEE Latin America Transactions.

[11]  H. Abdi,et al.  Improved dynamic performance of wind energy conversion system by UPFC , 2013, 2013 IEEE International Conference on Industrial Technology (ICIT).

[12]  A.R. Milani,et al.  Dynamic and stability improvement of a wind farm connected to grid using UPFC , 2008, 2008 IEEE International Conference on Industrial Technology.

[13]  P. Ramanathan.  A Statcom-Control Scheme for Grid Connected Wind Energy System for Power Quality Improvement , 2014 .

[14]  Li Wang,et al.  Stability Enhancement of DFIG-Based Offshore Wind Farm Fed to a Multi-Machine System Using a STATCOM , 2013, IEEE Transactions on Power Systems.

[15]  T.A. Haskew,et al.  Analysis of Decoupled d-q Vector Control in DFIG Back-to-Back PWM Converter , 2007, 2007 IEEE Power Engineering Society General Meeting.

[16]  A. Abu-Siada,et al.  Application of STATCOM to improve the LVRT of DFIG during RSC fire-through fault , 2012, 2012 22nd Australasian Universities Power Engineering Conference (AUPEC).

[17]  Zhao Fang.  Crowbar Control Strategy for Doubly Fed Induction Generator of Wind Farm During Power Grid Voltage Dips , 2008 .

[18]  Yongdong Li,et al.  Improved Crowbar Control Strategy of DFIG Based Wind Turbines for Grid Fault Ride-Through , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[19]  Chen Jian,et al.  Simplified Active and Reactive Power Control of Doubly Fed Induction Generator and the Simulation with STATCOM , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[20]  R.G. Harley,et al.  Real-Time Implementation of a STATCOM on a Wind Farm Equipped With Doubly Fed Induction Generators , 2006, IEEE Transactions on Industry Applications.

[21]  S Islam,et al.  Application of SMES Unit in Improving the Performance of an AC/DC Power System , 2011, IEEE Transactions on Sustainable Energy.

[22]  P. Student,et al.  Application of SMES to Enhance the Dynamic Performance of DFIG during Voltage Sag and Swell , 2014 .

[23]  A. Abu-Siada,et al.  Application of SMES Unit to Improve DFIG Power Dispatch and Dynamic Performance During Intermittent Misfire and Fire-Through Faults , 2013, IEEE Transactions on Applied Superconductivity.