Characterizing corridor-level travel time distributions based on stochastic flows and segment capacities

Abstract Trip travel time reliability is an important measure of transportation system performance and a key factor affecting travelers’ choices. This paper explores a method for estimating travel time distributions for corridors that contain multiple bottlenecks. A set of analytical equations are used to calculate the number of queued vehicles ahead of a probe vehicle and further capture many important factors affecting travel times: the prevailing congestion level, queue discharge rates at the bottlenecks, and flow rates associated with merges and diverges. Based on multiple random scenarios and a vector of arrival times, the lane-by-lane delay at each bottleneck along the corridor is recursively estimated to produce a route-level travel time distribution. The model incorporates stochastic variations of bottleneck capacity and demand and explains the travel time correlations between sequential links. Its data needs are the entering and exiting flow rates and a sense of the lane-by-lane distribution of traffic at each bottleneck. A detailed vehicle trajectory data-set from the Next Generation SIMulation (NGSIM) project has been used to verify that the estimated distributions are valid, and the sources of estimation error are examined.

[1]  Hesham Rakha,et al.  Multistate Model for Travel Time Reliability , 2010 .

[2]  Terry L. Friesz,et al.  A Variational Inequality Formulation of the Dynamic Network User Equilibrium Problem , 1993, Oper. Res..

[3]  Hesham Rakha,et al.  Multi-state travel time reliability model: Impact of incidents on travel time reliability , 2011, 2011 14th International IEEE Conference on Intelligent Transportation Systems (ITSC).

[4]  Rob Hranac,et al.  Decomposition of Travel Time Reliability into Various Sources , 2011 .

[5]  黒田 孝次,et al.  Highway Capacity Manual改訂の動向--テイラ-教授の講演より , 1984 .

[6]  Hong Kam Lo,et al.  Network with degradable links: capacity analysis and design , 2003 .

[7]  T F Golob,et al.  An analysis of the severity and incident duration of truck-involved freeway accidents. , 1987, Accident; analysis and prevention.

[8]  Martin L. Hazelton,et al.  Inference for origin–destination matrices: estimation, prediction and reconstruction , 2001 .

[9]  G. Giuliano.  INCIDENT CHARACTERISTICS, FREQUENCY, AND DURATION ON A HIGH VOLUME URBAN FREEWAY , 1989 .

[10]  Younshik Chung,et al.  Calculation of travel time variability from loop detector data , 2006 .

[11]  Richard A Margiotta,et al.  Recurring Traffic Bottlenecks: A Primer: Focus on Low-Cost Operational Improvements , 2007 .

[12]  Carlos F. Daganzo,et al.  Properties of link travel time functions under dynamic loads , 1995 .

[13]  A J Richardson.  TRAVEL TIME VARIABILITY ON AN URBAN FREEWAY , 2003 .

[14]  Athanasios K. Ziliaskopoulos,et al.  Stochastic Dynamic Network Design Problem , 2001 .

[15]  Pravin Varaiya,et al.  Travel-Time Reliability as a Measure of Service , 2003 .

[16]  I. Greenberg.  The log normal distribution of headways , 1966 .

[17]  G. F. Newell.  A simplified theory of kinematic waves in highway traffic, part II: Queueing at freeway bottlenecks , 1993 .

[18]  Richard Cowan,et al.  Useful headway models , 1975 .

[19]  Xiaojian Nie,et al.  Some Consistency Conditions for Dynamic Traffic Assignment Problems , 2005 .

[20]  Bin Ran,et al.  A New Class of Instantaneous Dynamic User-Optimal Traffic Assignment Models , 1993, Oper. Res..

[21]  Stephen D. Clark,et al.  Modelling network travel time reliability under stochastic demand , 2005 .

[22]  Agachai Sumalee,et al.  Modeling impacts of adverse weather conditions on a road network with uncertainties in demand and supply , 2008 .

[23]  Bongsoo Son,et al.  Shock Wave and Cumulative Arrival and Departure Models: Partners Without Conflict , 2001 .

[24]  Nagui M. Rouphail,et al.  Analytical Models for Quantifying Travel Time Variability Based on Stochastic Capacity and Demand Distributions , 2011 .

[25]  S. Waller,et al.  A computationally efficient methodology to characterize travel time reliability using the fast Fourier transform , 2010 .