Fluidization of FCC powders in the bubble-free regime: effect of types of gases and temperature

Abstract A 0.152 m diameter stainless steel fluidization column was constructed which can operate at closely regulated temperatures up to 500 °C. A wide range of experiments was performed at different temperatures using specially-prepared size fractions of FCC powders in various gases: air, argon, neon, carbon dioxide and Freon-12. Measurements of the incipient fluidization and bubbling velocities, and the voidage at the bubbling point, are compared with existing correlations and new improved correlations have been developed. Published theoretical equations, which are based entirely on hydrodynamic considerations, predict that the voidage at minimum bubbling should increase as temperature increases, but our experimental results show virtually no change. Although these equations predict the voidage well for the coarser fractions at room temperature, they become increasingly inaccurate as particle size is decreased, and this is believed to be the result of ignoring the interparticle forces.

[1]  D. Geldart,et al.  Gas fluidization technology , 1986 .

[2]  Derek Geldart,et al.  Estimation of basic particle properties for use in fluid—particle process calculations , 1990 .

[3]  Liang-Shih Fan,et al.  On the model equations of Gibilaro and Foscolo with corrected buoyancy force , 1992 .

[4]  O. Molerus,et al.  Interpretation of Geldart's type A, B, C and D powders by taking into account interparticle cohesion forces , 1982 .

[5]  Roland Clift,et al.  The effect of thin liquid layers on fluidisation characteristics , 1984 .

[6]  N. Ueda,et al.  MECHANISM OF INCIPIENT FLUIDIZATION IN FLUIDIZED BED AT ELEVATED TEMPERATURE , 1986 .

[7]  D. Geldart,et al.  Fluidization of powders showing degrees of cohesiveness—I. Bed expansion , 1984 .

[8]  C. Wen,et al.  A generalized method for predicting the minimum fluidization velocity , 1966 .

[9]  The influence of temperature on the quality of gas fluidization , 1994 .

[10]  M. Poletto,et al.  Fluidization of solids with CO2 at pressures and temperatures ranging from ambient to nearly critical conditions , 1993 .

[11]  J. Baeyens,et al.  Fluidization and its Applications : Proceedings of the International Symposium held in Toulouse, France, in 1973; pp. 729, £30.00. , 1976 .

[12]  J. Botterill,et al.  The effect of operating temperature on the velocity of minimum fluidization, bed voidage and general behaviour , 1982 .

[13]  D. Geldart,et al.  Behaviour of gas-fluidized beds of fine powders part I. Homogeneous expansion , 1980 .

[14]  K Kornelis Rietema,et al.  The effect of interparticle forces on the stability of gas-fluidized beds - I.Experimental evidence , 1990 .

[15]  D. Geldart,et al.  The effect of particle properties on the behaviour of equilibrium cracking catalysts in standpipe flow , 1986 .

[16]  L. G. Gibilaro,et al.  A fully predictive criterion for the transition between particulate and aggregate fluidization , 1984 .

[17]  D. Geldart.  Types of gas fluidization , 1973 .

[18]  K. Rietema,et al.  The Dynamics of Fine Powders , 1991 .