Ablation of metals by ultrashort laser pulses

Ablation of Fe by ultrashort laser pulses with durations 0.1, 1, and 5 ps were investigated experimentally. The laser fluence varied from the ablation threshold up to 100 J cm−2. Above 1 J cm−2, the ablation rate depended on the laser pulse duration, with the shortest pulse producing the highest value. A change in the ablation rate as the laser fluence increased was also observed. These results were analysed using molecular dynamics simulations. We show that the change in the ablation rate is connected to an overheating of the material above the critical point, which results in a steep rise of the pressure developed. Furthermore, due to the electron heat diffusion, the overheated volume increases and involves material located deeper than the skin depth. An increase in the pulse duration results in a decrease in the degree of overheating.

[1]  Laurent J. Lewis,et al.  Molecular-dynamics study of ablation of solids under femtosecond laser pulses , 2003 .

[2]  B. Stuart,et al.  Rate dependence of short-pulse laser ablation of metals in air and vacuum , 2003 .

[3]  Vladimir T. Tikhonchuk,et al.  Electrostatic mechanism of ablation by femtosecond lasers , 2002 .

[4]  P. Corkum,et al.  Influence of laser parameters and material properties on micro drilling with femtosecond laser pulses , 1999 .

[5]  L. Girifalco,et al.  Application of the Morse Potential Function to Cubic Metals , 1959 .

[6]  J. Banavar,et al.  Computer Simulation of Liquids , 1988 .

[7]  Leonid V. Zhigilei,et al.  Dynamics of the plume formation and parameters of the ejected clusters in short-pulse laser ablation , 2003 .

[8]  Minoru Obara,et al.  Ablation characteristics of Au, Ag, and Cu metals using a femtosecond Ti:sapphire laser , 1999 .

[9]  W. Kautek,et al.  Femtosecond laser ablation of silicon–modification thresholds and morphology , 2002 .

[10]  Boris N. Chichkov,et al.  Ablation of metals by ultrashort laser pulses , 1997 .

[11]  Michael D. Perry,et al.  Material effects in ultra-short pulse laser drilling of metals , 1999 .

[12]  Boris N. Chichkov,et al.  Heat transport in metals irradiated by ultrashort laser pulses , 1998 .

[13]  K. Kirby,et al.  Laser machining of glass forming ceramics , 1998 .

[14]  Sergei I. Anisimov,et al.  Pulsed laser evaporation: equation-of-state effects , 1999 .

[15]  Leonid V. Zhigilei,et al.  Metal ablation by picosecond laser pulses: A hybrid simulation , 2002 .

[16]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .