Influence of Build Orientation and Aging on Corrosion Behaviour of 18Ni300 Maraging Steel produced via Powder Bed Fusion using Laser Beam (PBF-LB)

[1]  Jiusheng Li,et al.  Modified Ni Nanoparticles as Additives in Various Greases: Assessment of Comparative Performance Potential , 2022, Lubricants.

[2]  K. Chattopadhyay,et al.  Effect of build orientation on wear and erosion behavior of maraging steel processed by powder bed fusion using laser beam (PBF-LB) , 2022, Surface Topography: Metrology and Properties.

[3]  Zhou-hua Jiang,et al.  Why CoCrFeMnNi HEA could not passivate in chloride solution?——A novel strategy to significantly improve corrosion resistance of CoCrFeMnNi HEA by N-alloying , 2022, Corrosion Science.

[4]  G. Özer,et al.  Effect of building orientations and heat treatments on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties, fracture mechanism and corrosion behavior , 2022, Rapid Prototyping Journal.

[5]  A. Ramalho,et al.  Influence of Deposition Plane Angle and Saline Corrosion on Fatigue Crack Growth in Maraging Steel Components Produced by Laser Powder Bed Fusion , 2022, Metals.

[6]  J. Rovira,et al.  Synthesis and Characterization of an Fe/Co Ferrite Spinel Oxide Film Produced by Using N2/Steam Heat Treatment on Two Maraging Steels , 2022, Metallurgical and Materials Transactions A.

[7]  J. Xue,et al.  Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel , 2021 .

[8]  D. Kong,et al.  Influence of pore defects on the mechanical property and corrosion behavior of SLM 18Ni300 maraging steel , 2021, Materials Characterization.

[9]  Xiaojing Wang,et al.  Effect of aging treatment on microstructure and corrosion behavior of a Fe-18Cr-15Mn-0.66N stainless steel , 2021, Journal of Materials Science & Technology.

[10]  H. Asgari,et al.  A hybrid additively manufactured martensitic-maraging stainless steel with superior strength and corrosion resistance for plastic injection molding dies , 2021 .

[11]  A. Silvello,et al.  Improving the Wear and Corrosion Resistance of Maraging Part Obtained by Cold Gas Spray Additive Manufacturing , 2021, Metals.

[12]  Tanya Buddi,et al.  WEAR AND CORROSION ANALYSIS ON MARAGING STEEL MS1 AND STAINLESS STEEL 316L DEVELOPED BY DIRECT METAL LASER SINTERING PROCESS , 2021, Advances in Materials and Processing Technologies.

[13]  C. Zanella,et al.  Studying the Microstructural Effect of Selective Laser Melting and Electropolishing on the Performance of Maraging Steel , 2021, Journal of Materials Engineering and Performance.

[14]  W. S. Araújo,et al.  Microstructural characterization of grade 300 and grade 350 maraging steels and electrochemical study in hydrofluoric solution , 2021 .

[15]  Meng‐Dan Jiang,et al.  Cobalt Phosphide (Co2P) with Notable Electrocatalytic Activity Designed for Sensitive and Selective Enzymeless Bioanalysis of Hydrogen Peroxide , 2021, Nanoscale Research Letters.

[16]  H. Lashgari,et al.  Microstructure, Tribological Properties and Corrosion Behaviour of Additively Manufactured 17-4PH Stainless Steel: Effects of Scanning Pattern, Build Orientation, and Single vs. Double scan , 2020 .

[17]  K. Chattopadhyay,et al.  Effect of build orientation on microstructure and tensile behaviour of selectively laser melted M300 maraging steel , 2020 .

[18]  I. Badruddin,et al.  Wear resistance of maraging steel developed by direct metal laser sintering , 2020 .

[19]  G. Özer,et al.  A Study on the Effects of Different Heat‐Treatment Parameters on Microstructure–Mechanical Properties and Corrosion Behavior of Maraging Steel Produced by Direct Metal Laser Sintering , 2020, steel research international.

[20]  D. Kong,et al.  Enhancing the corrosion resistance of selective laser melted 15-5PH martensite stainless steel via heat treatment , 2020 .

[21]  Troy Y. Ansell,et al.  Mechanical Properties of 3D-Printed Maraging Steel Induced by Environmental Exposure , 2020 .

[22]  A. Nath,et al.  Effects of heat treatment on microstructure, mechanical and corrosion properties of 15-5 PH stainless steel parts built by selective laser melting process , 2020, Journal of Manufacturing Processes.

[23]  G. Qiao,et al.  Effect of Cobalt on the Microstructure and Corrosion Behavior of Martensitic Age-Hardened Stainless Steel , 2019, Journal of Materials Engineering and Performance.

[24]  R. Raghavendra,et al.  Plastic anisotropy of additively manufactured maraging steel: Influence of the build orientation and heat treatments , 2019, Additive Manufacturing.

[25]  Wei Wu,et al.  Electrochemical Investigation of Corrosion of X80 Steel under Elastic and Plastic Tensile Stress in CO2 Environment , 2018, Metals.

[26]  P. de Lima-Neto,et al.  Corrosion investigation of the 18Ni 300 grade maraging steel in aqueous chloride medium containing H2S and CO2 , 2018, Electrochimica Acta.

[27]  C. Örnek,et al.  Additive manufacturing – a general corrosion perspective , 2018, Corrosion Engineering, Science and Technology.

[28]  D. Chun,et al.  Molybdenum Effects on Pitting Corrosion Resistance of FeCrMnMoNC Austenitic Stainless Steels , 2018, Metals.

[29]  S. W. Kim,et al.  Effect of Cr Contents and Heat Treating on Reverted Austenite in Maraging Steel Weldments , 2018, Metals and Materials International.

[30]  H. Hu,et al.  Synergistic effects of fluoride and chloride on general corrosion behavior of AISI 316 stainless steel and pure titanium in H 2 SO 4 solutions , 2018 .

[31]  Min Liu,et al.  Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel , 2017 .

[32]  Yong-qiang Yang,et al.  Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting , 2017 .

[33]  D. Raabe,et al.  Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition , 2017 .

[34]  Giovanni Meneghetti,et al.  Influence of build orientation on static and axial fatigue properties of Maraging steel specimens produced by additive manufacturing , 2017 .

[35]  Fu-hui Wang,et al.  Corrosion Behavior of Ti60 Alloy under a Solid NaCl Deposit in Wet Oxygen Flow at 600 °C , 2016, Scientific Reports.

[36]  Yong-qiang Yang,et al.  Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts , 2016 .

[37]  Christoph Klahn,et al.  Considering Part Orientation in Design for Additive Manufacturing , 2016 .

[38]  K. S. Rao,et al.  Microstructure and corrosion behaviour of gas tungsten arc welds of maraging steel , 2015 .

[39]  H. E. Desouky,et al.  Effect of Chloride Concentration on the Corrosion Rate of Maraging Steel , 2014 .

[40]  El-Sayed M. Sherif,et al.  Anodic Dissolution of API X70 Pipeline Steel in Arabian Gulf Seawater after Different Exposure Intervals , 2014 .

[41]  El-Sayed M. Sherif,et al.  Electrochemical Studies on the Corrosion Behavior of API X65 Pipeline Steel in Chloride Solutions , 2013, International Journal of Electrochemical Science.

[42]  J. Neshati,et al.  2-Butyne-1,4-diol as a novel corrosion inhibitor for API X65 steel pipeline in carbonate/bicarbonate solution , 2012 .

[43]  Seung‐Hwan Lee,et al.  Effect of cobalt on the corrosion resistance of low alloy steel in sulfuric acid solution , 2011 .

[44]  J. Neshati,et al.  Failure analysis of stress corrosion cracking occurred in a gas transmission steel pipeline , 2011 .

[45]  El-Sayed M. Sherif.  Effects of 2-amino-5-(ethylthio)-1,3,4-thiadiazole on copper corrosion as a corrosion inhibitor in 3% NaCl solutions , 2006 .

[46]  J. Pardal,et al.  Modeling of precipitation hardening during the aging and overaging of 18Ni–Co–Mo–Ti maraging 300 steel , 2005 .

[47]  B. L. Maschhoff,et al.  Thin oxide layers on clean iron surfaces : formation under vacuum and characterization by photoelectron spectroscopy and electrochemical reactions of probe molecules at the oxide/electrolyte interface , 1991 .

[48]  A. Din,et al.  Oxide film thickening on the surface of metals in aqueous solutions : a critique of the theory of open-circuit potential transients , 1990 .

[49]  M. Arbab,et al.  The kinetics and mechanism of oxygen uptake on a polycrystalline iron surface , 1988 .