Abstract Combustion with oxygen-enriched air can substantially reduce fuel consumption in certain industrial applications. The use of membranes is a potentially attractive approach for producing oxygen-enriched air. A variety of membrane materials and operating conditions can be used to produce oxygen concentrations in the range of interest, which is generally 25 to 35% O 2 . To determine the optimum system, a trade-off must be made between capital cost (membrane area) and operating cost (pumping power). A silicone-based membrane oxygen enricher was fabricated and factory tested. As expected, a substantial reduction in natural gas consumption was achieved. During the test period some membrane degradation was experienced due to pinhole formation. It was determined that pinholes were not a result of the factory environment, and that use of a membrane oxygen enricher to achieve fuel savings is technically feasible.
[1]
Sun-Tak Hwang,et al.
Gas Separation by a Continuous Membrane Column
,
1980
.
[2]
W. L. Robb,et al.
THIN SILICONE MEMBRANES‐THEIR PERMEATION PROPERTIES AND SOME APPLICATIONS
,
1968,
Annals of the New York Academy of Sciences.
[3]
Sun-Tak Hwang,et al.
The continuous membrane column
,
1980
.
[4]
T. Miyauchi,et al.
Radioactive Rare Gas Separation Performance of a Two-Unit Series-Type Separation Cell
,
1978
.
[5]
William J. Ward,et al.
Ultrathin silicone/polycarbonate membranes for gas separation processes
,
1976
.
[6]
S. Hwang,et al.
Computer simulation of a continuous membrane column
,
1984
.
[7]
J. A. Quinn,et al.
Separation of gases with synthetic membranes
,
1983
.