Test bed for power amplifier behavioral characterization and modeling

Abstract Traditional test bed of power amplifier (PA) behavioral characterization and modeling based on vector signal analyzer (VSA) and often equipped with specialized software is both expensive and inflexible to modify to suit different scenarios. In this paper, a new test bed based on an oscilloscope or other general purpose data acquisition systems, which works as analog to digital converter (ADC) with a proper (radio frequency) RF bandwidth and maximum sampling rate, is proposed. The common impairments, e.g. transmitter IQ imbalances, channel delay, frequency offset, and carrier phase offset, are all well compensated. The accurately recovered envelopes of the PA’s input and output signals are used for a PA behavioral characterization and modeling. Furthermore, Relative envelope error (REE) parameter is proposed to evaluate the accuracy of envelope recovery. The experiment shows a very accurate RF signal envelope recovery, and a good performance of PA behavioral modeling.

[1]  Leopoldo Angrisani,et al.  Modulation Quality Measurement in WiMAX Systems Through a Fully Digital Signal Processing Approach , 2010, IEEE Transactions on Instrumentation and Measurement.

[2]  Fadhel M. Ghannouchi,et al.  Compensating I–Q Imperfections in Hybrid RF/Digital Predistortion With an Adapted Lookup Table Implemented in an FPGA , 2010, IEEE Transactions on Circuits and Systems II: Express Briefs.

[3]  C.-C. Jay Kuo,et al.  Multi-Carrier Techniques for Broadband Wireless Communications - A Signal Processing Perspective , 2007, Communications and Signal Processing.

[4]  Yves Rolain,et al.  Estimation and Validation of Semiparametric Dynamic Nonlinear Models , 2008, IEEE Transactions on Instrumentation and Measurement.

[5]  Lingyang Song,et al.  Orthogonal Frequency Division Multiple Access Fundamentals and Applications , 2010 .

[6]  P. Welch.  The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms , 1967 .

[7]  Lajos Hanzo,et al.  OFDM and MC-CDMA: A Primer , 2006 .

[8]  Taijun Liu,et al.  Systematic and Adaptive Characterization Approach for Behavior Modeling and Correction of Dynamic Nonlinear Transmitters , 2007, IEEE Transactions on Instrumentation and Measurement.

[9]  R. Inkol,et al.  A digital quadrature demodulation system , 1996 .

[10]  Dennis R. Morgan,et al.  Compensation of Frequency-Dependent Gain/Phase Imbalance in Predistortion Linearization Systems , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.

[11]  T. Reveyrand,et al.  A fully calibrated four channels time domain RF envelope measurement system for the envelope characterization of nonlinear devices in a load-pull environment , 2005, 2005 European Microwave Conference.

[12]  Jungsang Kim,et al.  Digital predistortion of wideband signals based on power amplifier model with memory , 2001 .

[13]  Peter Händel,et al.  A Technique to Extend the Bandwidth of an RF Power Amplifier Test Bed , 2007, IEEE Transactions on Instrumentation and Measurement.

[14]  Umberto Mengali,et al.  An improved frequency offset estimator for OFDM applications , 1999, IEEE Communications Letters.

[15]  C. Fager,et al.  Improvement of Oscilloscope Based RF Measurements by Statistical Averaging Techniques , 2006, 2006 IEEE MTT-S International Microwave Symposium Digest.

[16]  Fadhel M. Ghannouchi,et al.  Realistic power-amplifiers characterization with application to baseband digital predistortion for 3G base stations , 2002 .