Evaluation of oxidation resistant SiC-ZrB2 composite interlayer for plasma sprayed Y2O3 coating over graphite

[1]  S. Dong,et al.  Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C , 2021 .

[2]  R. Swadźba,et al.  Lifetime improvement of EB-PVD 7YSZ TBCs by doping of Hf or Zr in NiCoCrAlY bond coats , 2021 .

[3]  S. Dong,et al.  Long-term ablation behavior and mechanisms of 2D-Cf/ZrB2-SiC composites at temperatures up to 2400 °C , 2020 .

[4]  Xiao Huang,et al.  Sintering resistance of suspension plasma sprayed 7YSZ TBC under isothermal and cyclic oxidation , 2020 .

[5]  C. Rao,et al.  Surface optimization of CVD grown silicon carbide interlayer on graphite for plasma sprayed yttria topcoat , 2020 .

[6]  D. Fang,et al.  Stress among the APS-Prepared TBCs: Testing and Analysis , 2019, Methods for Film Synthesis and Coating Procedures.

[7]  P. Venkatesh,et al.  Evaluation of Yttria Coated High Density Graphite with Silicon Carbide Interlayer for Uranium Melting Applications , 2019, Ceramics International.

[8]  C. Rao,et al.  Pack cemented silicon carbide interlayer for plasma sprayed yttria over graphite , 2019, Materials and Manufacturing Processes.

[9]  L. Deng,et al.  Oxidation behaviour of plasma-sprayed ZrB2-SiC coatings , 2019, Ceramics International.

[10]  M. Naderi,et al.  Ablation mechanism of ZrB2-SiC coating for SiC-coated graphite under an oxyacetylene flame , 2018, Surface and Coatings Technology.

[11]  D. Das,et al.  In-situ formation of SiC, ZrB2-SiC and ZrB2-SiC-B4C-YAG coatings for high temperature oxidation protection of C/C composites , 2018, Corrosion Science.

[12]  L. Silvestroni,et al.  Method to improve the oxidation resistance of ZrB2-based ceramics for reusable space systems , 2018 .

[13]  A. Abdollahi,et al.  High temperature anti-oxidation behavior of in situ and ex situ nanostructured C/SiC/ZrB2 -SiC gradient coatings: Thermodynamical evolution, microstructural characterization, and residual stress analysis , 2018, International Journal of Applied Ceramic Technology.

[14]  M. Naderi,et al.  The ablation behavior of ZrB2-SiC coating prepared by shrouded plasma spray on SiC-coated graphite , 2018 .

[15]  S. Dong,et al.  Ablation behavior of three-dimensional Cf/SiC-ZrC-ZrB2 composites prepared by a joint process of sol-gel and reactive melt infiltration , 2018 .

[16]  O. Guillon,et al.  Correlation of splat morphologies with porosity and residual stress in plasma-sprayed YSZ coatings , 2017 .

[17]  N. Padture,et al.  Inhomogeneous oxidation of ZrB2-SiC ultra-high-temperature ceramic particulate composites and its mitigation , 2017 .

[18]  Zhuan Li,et al.  Oxidation behavior of C/C composites with SiC/ZrSiO 4 –SiO 2 coating , 2017 .

[19]  Yilun Liu,et al.  A Theoretical Model for Predicting Residual Stress Generation in Fabrication Process of Double-Ceramic-Layer Thermal Barrier Coating System , 2017, PloS one.

[20]  N. Ehsani,et al.  In-situ synthesis of SiC-ZrB2 coating by a novel pack cementation technique to protect graphite against oxidation , 2017 .

[21]  N. Ehsani,et al.  Oxidation resistance of a SiC–ZrB2 coating prepared by a novel pack cementation on SiC-coated graphite , 2017, Journal of Materials Science.

[22]  Hejun Li,et al.  Comparison of the oxidation behaviors of SiC coatings on C/C composites prepared by pack cementation and chemical vapor deposition , 2016 .

[23]  H. Jianfeng,et al.  Self-healing ZrB2–SiO2 oxidation resistance coating for SiC coated carbon/carbon composites , 2016 .

[24]  Wang Qing,et al.  ZrB2-SiC as a protective coating for C/SiC composites: Effect of high temperature oxidation on thermal shock property and protection mechanism , 2016 .

[25]  Xinghong Zhang,et al.  Oxidation protective ZrB2–SiC coatings with ferrocene addition on SiC coated graphite , 2016 .

[26]  Hejun Li,et al.  Microstructure and oxidation behavior of C/C–ZrB2–SiC composites coated with SiC coating at high temperature , 2015 .

[27]  W. Peng,et al.  Thermal cycling and oxidation resistance of B modified ZrB2–SiC coatings on SiC coated graphite , 2015 .

[28]  Xinghong Zhang,et al.  (ZrB2–SiC)/SiC oxidation protective coatings for graphite materials , 2015 .

[29]  W. Peng,et al.  Oxidation resistant zirconium diboride–silicon carbide coatings for silicon carbide coated graphite materials , 2015 .

[30]  Hejun Li,et al.  Ablation resistance of ZrB2–SiC coating prepared by supersonic atmosphere plasma spraying for SiC-coated carbon/carbon composites , 2014 .

[31]  Qizhong Huang,et al.  Preparation of a double layer SiC coating and its oxidation resistance at 1773 K , 2014 .

[32]  Hejun Li,et al.  ZrB2–SiC gradient oxidation protective coating for carbon/carbon composites , 2014 .

[33]  Hejun Li,et al.  Preparation of oxidation protective ZrB2-SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites , 2014 .

[34]  L. Chai,et al.  Resistance to oxidation and ablation of SiC coating on graphite prepared by chemical vapor reaction , 2013 .

[35]  Hejun Li,et al.  ZrB2–SiC coating to protect carbon/carbon composites against ablation , 2013 .

[36]  Hejun Li,et al.  ZrSiO4 Oxidation Protective Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying , 2013, Journal of Thermal Spray Technology.

[37]  B. Harder,et al.  Oxidation Transitions for SiC Part I. Active‐to‐Passive Transitions , 2013 .

[38]  C. Asma,et al.  Experimental investigation of passive/active oxidation behavior of SiC based ceramic thermal protection materials exposed to high enthalpy plasma , 2013 .

[39]  Xiaohong Shi,et al.  Oxidation and ablation resistance of ZrB2–SiC–Si/B-modified SiC coating for carbon/carbon composites , 2013 .

[40]  B. Harder,et al.  Oxidation Transitions for SiC Part II. Passive‐to‐Active Transitions , 2013 .

[41]  Hejun Li,et al.  A SiC/ZrB2–SiC/SiC oxidation resistance multilayer coating for carbon/carbon composites , 2012 .

[42]  Heng Wu,et al.  MoSi2-based oxidation protective coatings for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying , 2010 .

[43]  Zhi Wang,et al.  Oxidation mechanism and resistance of ZrB2–SiC composites , 2009 .

[44]  A. Bellosi,et al.  Processing and properties of ultra-high temperature ceramics for space applications , 2008 .

[45]  E. Opila,et al.  UHTCs: Ultra-High Temperature Ceramic Materials for Extreme Environment Applications , 2007 .

[46]  Y. Zhou,et al.  Modeling of residual stresses variation with thermal cycling in thermal barrier coatings , 2006 .

[47]  O. Yeheskel,et al.  Elastic Moduli of Transparent Yttria , 2004 .

[48]  Huang Jianfeng,et al.  Influence of the preparation temperature on the phase, microstructure and anti-oxidation property of a SiC coating for C/C composites , 2004 .

[49]  A. M. Limarga,et al.  Modeling of residual stresses in a plasma-sprayed zirconia/alumina functionally graded-thermal barrier coating , 2003 .

[50]  T. Valente,et al.  Plasma spray deposition and high temperature characterization of ZrB2–SiC protective coatings , 2002 .

[51]  S. Sinogeikin,et al.  Elastic constants of yttria (Y2O3) monocrystals to high temperatures , 2001 .

[52]  Jianguo Lin,et al.  A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system.: Part II: Life prediction model , 2001 .

[53]  Earl A. Gulbransen,et al.  The high-temperature oxidation, reduction, and volatilization reactions of silicon and silicon carbide , 1972 .