Hydrodeoxygenation of pyrolysis oil fractions: process understanding and quality assessment through co-processing in refinery units

Hydrodeoxygenation (HDO) of pyrolysis oil fractions was studied to better understand the HDO of whole pyrolysis oil and to assess the possibility to use individual upgrading routes for these fractions. By mixing pyrolysis oil and water in a 2:1 weight ratio, two fractions were obtained: an oil fraction (OFWA) containing 32 wt% of the organics from the whole oil and an aqueous fraction water addition (AFWA) with the remaining organics. These fractions (and also the whole pyrolysis oil as the reference) were treated under HDO conditions at different temperatures (220, 270 and 310 °C), a constant total pressure of 190 bar, and using 5 wt% Ru/C catalyst. An oil product phase was obtained from all the feedstocks; even from AFWA, 29 wt% oil yield was obtained. Quality parameters (such as coking tendency and H/C) for the resulting HDO oils differed considerably, with the quality of the oil from AFWA being the highest. These HDO oils were evaluated by co-processing with an excess of fossil feeds in catalytic cracking and hydrodesulfurisation (HDS) lab-scale units. All co-processing experiments were successfully conducted without operational problems. Despite the quality differences of the (pure) HDO oils, the product yields upon catalytic cracking of their blends with Long Residue were similar. During co-processing of HDO oils and straight run gas oil in a HDS unit, competition between HDS and HDO reactions was observed without permanent catalyst deactivation. The resulting molecular weight distribution of the co-processed HDO/fossil oil was similar to when hydrotreating only fossil oil and independent of the origin of the HDO oil.

[1]  Anja Oasmaa,et al.  Fast Pyrolysis of Forestry Residue. 2. Physicochemical Composition of Product Liquid , 2003 .

[2]  S. Kersten,et al.  Pyrolysis oil upgrading by high pressure thermal treatment , 2010 .

[3]  D. Meier,et al.  Hydrocracking of organocell lignin for phenol production , 1994 .

[4]  Process-product studies on pyrolysis oil upgrading by hydrotreatment with Ru/C catalysts , 2009 .

[5]  W. Baldauf,et al.  Production of a bio-gasoline by upgrading biomass flash pyrolysis liquids via hydrogen processing and catalytic cracking , 1998 .

[6]  A. Krause,et al.  Hydrodeoxygenation of guaiacol on noble metal catalysts , 2009 .

[7]  J. Wildschut,et al.  Hydrotreatment of Fast Pyrolysis Oil Using Heterogeneous Noble-Metal Catalysts , 2009 .

[8]  Stefan Czernik,et al.  Hydrogen by Catalytic Steam Reforming of Liquid Byproducts from Biomass Thermoconversion Processes , 2002 .

[9]  Anthony V. Bridgwater,et al.  Fast pyrolysis of biomass : a handbook , 1999 .

[10]  Anja Oasmaa,et al.  Stabilization of biomass‐derived pyrolysis oils , 2010 .

[11]  Dietrich Meier,et al.  Catalytic hydrotreatment of some technical lignins , 1993 .

[12]  Christophe Geantet,et al.  Co-processing of pyrolisis bio oils and gas oil for new generation of bio-fuels: Hydrodeoxygenation of guaïacol and SRGO mixed feed , 2009 .

[13]  S. Kaliaguine,et al.  Catalytic hydrotreatment of vacuum pyrolysis oils from wood , 1988 .

[14]  W. V. Swaaij,et al.  Catalytic gasification of dry and wet biomass , 2009 .

[15]  J. Wildschut,et al.  Catalytic hydrotreatment of fast pyrolysis oil: Model studies on reaction pathways for the carbohydrate fraction , 2009 .

[16]  Anja Oasmaa,et al.  Solvent fractionation method with Brix for rapid characterization of wood fast pyrolysis liquids , 2008 .

[17]  Thomas A. Milne,et al.  Thermodynamic data for biomass materials and waste components , 1987 .

[18]  Eun-Jae Shin,et al.  Gas-phase hydrogenation/hydrogenolysis of phenol over supported nickel catalysts , 2000 .

[19]  Yves Schuurman,et al.  Biomass derived feedstock co-processing with vacuum gas oil for second-generation fuel production in FCC units , 2010 .

[20]  A. Kloekhorst,et al.  Lignin valorisation for chemicals and (transportation) fuels via (catalytic) pyrolysis and hydrodeoxygenation , 2009 .

[21]  P. Majerski,et al.  Conversion of lignins to hydrocarbon fuels , 1989 .

[22]  Douglas C. Elliott,et al.  Historical Developments in Hydroprocessing Bio-oils , 2007 .

[23]  Douglas C. Elliott,et al.  Catalytic Hydroprocessing of Chemical Models for Bio-oil , 2009 .

[24]  A. Bridgwater,et al.  Overview of Applications of Biomass Fast Pyrolysis Oil , 2004 .

[25]  W. Baldauf,et al.  Upgrading of flash pyrolysis oil and utilization in refineries , 1994 .

[26]  W.P.M. van Swaaij,et al.  Hydrothermal Conversion of Biomass: I, Glucose Conversion in Hot Compressed Water , 2009 .

[27]  A. Corma,et al.  Processing biomass-derived oxygenates in the oil refinery: Catalytic cracking (FCC) reaction pathways and role of catalyst , 2007 .

[28]  Dietrich Meier,et al.  Characterization of the water-insoluble fraction from pyrolysis oil (pyrolytic lignin). Part I. PY–GC/MS, FTIR, and functional groups , 2001 .

[29]  C. Geantet,et al.  Impact of Oxygenated Compounds from Lignocellulosic Biomass Pyrolysis Oils on Gas Oil Hydrotreatment , 2009 .

[30]  Anja Oasmaa,et al.  Fast Pyrolysis of Forestry Residue. 1. Effect of Extractives on Phase Separation of Pyrolysis Liquids , 2003 .

[31]  Eddie G. Baker,et al.  Chemical processing in high-pressure aqueous environments. 2. Development of catalysts for gasification , 1993 .

[32]  M. J. Groeneveld,et al.  Production of advanced biofuels: Co-processing of upgraded pyrolysis oil in standard refinery units , 2010 .