Chimney Sweeping Robot Based on a Pneumatic Actuator

The need of improving the quality of professions led to the idea of simplification of processes during chimney sweeping. These processes have been essentially the same for tens of years. The goal of this paper is to bring an automation element into the chimney sweeping process, making the job easier for the chimney sweeper. In this paper, an essentially in-pipe robot is presented, which uses brushes to move while simultaneously cleaning the chimney or pipeline. The problem of the robot motion was reduced using an in-pipe robot due to the environments and obstacles that the robot has to face. An approach of using a pneumatic actuator for motion is presented along with the mechanical design. The next part of this paper is focused on the mathematical model of the robot motion, as well as its simulation and testing in the experimental pipeline. The simulations were compared with the experimental measurements and a few analyses were conducted describing the simulation model and its differences with the real robot, as well as considering certain parameters and their impact on the performance of the robot. The results are discussed at the end of the paper.

[1]  Ivan Virgala,et al.  Analyzing, Modeling and Simulation of Humanoid Robot Hand Motion , 2014 .

[2]  Antonio DeSimone,et al.  Motility of a Model Bristle-Bot: a Theoretical Analysis. , 2014, 1410.8153.

[3]  Wang Bin,et al.  Study of the Drive and Speed Governing Control for a Pipeline Pig , 2018, 2018 10th International Conference on Modelling, Identification and Control (ICMIC).

[4]  Erik Prada,et al.  Investigation of Snake Robot Locomotion Possibilities in a Pipe , 2020, Symmetry.

[5]  Pavol Bozek,et al.  Modeling of Boring Mandrel Working Process with Vibration Damper , 2020, Materials.

[6]  Erik Prada,et al.  A snake robot for locomotion in a pipe using trapezium-like travelling wave , 2021 .

[7]  Vladislav Maxim,et al.  In-pipe micromachine locomotion via the inertial stepping principle , 2014 .

[8]  Haiwei Lu,et al.  An inchworm mobile robot using electromagnetic linear actuator , 2009 .

[9]  Kazimieras Ragulskis,et al.  Behavior of Dynamic Processes in Self-Exciting Vibration of an Inpipe Robot , 2008 .

[10]  Hyouk Ryeol Choi,et al.  In-pipe robot based on selective drive mechanism , 2009 .

[11]  Shugen Ma,et al.  Design of a multilink-articulated wheeled inspection robot for winding pipelines: AIRo-II , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[12]  Shuhai Liu,et al.  The impact of pipeline bend on bi-directional pig and the theories for the optimal pig design , 2013, 2013 IEEE International Conference on Mechatronics and Automation.

[13]  Hiroshi Matsuhisa,et al.  Fundamental Study of Momentum Exchange Impact Damper Using Pre-straining Spring Mechanism , 2017 .

[14]  Alexander P. Ivanov,et al.  Analysis of an impact-driven capsule robot , 2020 .

[15]  Ivan Virgala,et al.  A Novel Approach for a Inverse Kinematics Solution of a Redundant Manipulator , 2018, Applied Sciences.

[16]  Anders Jönsson,et al.  Implications of Modelling One-Dimensional Impact by Using a Spring and Damper Element , 2005 .

[17]  Ivan Virgala,et al.  Miniature Mobile Bristled In-Pipe Machine , 2014 .

[18]  Young-Woo Park,et al.  Development of the inpipe robot for various sizes , 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[19]  Shi Liyun,et al.  Research on Bypass-valve and its Resistance Characteristic of Speed Regulating PIG in Gas Pipeline , 2011, 2011 Third International Conference on Measuring Technology and Mechatronics Automation.

[20]  Li Bo,et al.  Analysis of rotation of pigs during pigging in gas pipeline , 2015, 2015 International Conference on Fluid Power and Mechatronics (FPM).

[21]  Qixin Cao,et al.  Development of new pipeline maintenance system for repairing early-built offshore oil pipelines , 2008, 2008 IEEE International Conference on Industrial Technology.

[22]  Ali Ahmadian Mazraeh,et al.  Design of a multi-diameter in-line cleaning and fault detection pipe pigging device , 2015, 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IRIS).

[23]  Hong Gu,et al.  A Bristle-Based Pipeline Robot for Ill-Constraint Pipes , 2008, IEEE/ASME Transactions on Mechatronics.

[24]  Jianwei Zhang,et al.  Development of a Pipeline Inspection Robot for the Standard Oil Pipeline of China National Petroleum Corporation , 2020, Applied Sciences.