Micro hydraulic system using slim artificial muscles for a wearable haptic glove

Over the past few decades, various haptic gloves have been developed for use in virtual environments. The actuating systems for most existing haptic gloves require lots of external auxiliary equipment. Because of this, the motion of the user is restricted by the length of the electric wires or pneumatic tubes attached to this equipment. A compact actuation system, including related equipment, is thus indispensable for a wearable haptic glove to be truly effective. To resolve the problem of hampered motion and reach, a micro hydraulic actuating system was developed in this research. It was composed of a slim, flexible artificial muscle, a compact hydraulic module for actuating the muscle, and a micro pressure sensor for measuring without flux loss. The characteristics of the muscle were investigated for their control capacity. The step and sinusoidal responses were analyzed to evaluate the performance of the micro hydraulic system. Once these analyses were completed, a lightweight and compact actuation system was built incorporating a wearable haptic glove. By virtue of the developed micro hydraulic system, the wearable haptic glove was able to operate independently of any external equipment, and movement was completely free of any restrictions from wires or tubes.

[1]  Norihiro Hagita,et al.  Collaborative capturing of experiences with ubiquitous sensors and communication robots , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[2]  Tobi Delbrück,et al.  Ada - intelligent space: an artificial creature for the SwissExpo.02 , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[3]  Isao Shimoyama,et al.  A skeletal framework artificial hand actuated by pneumatic artificial muscles , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[4]  Grigore C. Burdea,et al.  Force and Touch Feedback for Virtual Reality , 1996 .

[5]  L. Kopecny.  Producing of tactile feedback via pneumatic muscles , 2003, IEEE International Conference on Industrial Technology, 2003.

[6]  Pierre Lopez,et al.  Modeling and control of McKibben artificial muscle robot actuators , 2000 .

[7]  Hyoukryeol Choi,et al.  SKK Hand Master-hand exoskeleton driven by ultrasonic motors , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[8]  Peter Korondi,et al.  Nonlinear Disturbance Compensation for Haptic Device , 2000 .

[9]  Yong Kwun Lee,et al.  A multi-channel micro valve for micro pneumatic artificial muscle , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[10]  Sungchul Kang,et al.  Development of Wearable Haptic System for Tangible Studio to Experience a Virtual Heritage Alive , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Sunil K. Singh,et al.  The exoskeleton glove for control of paralyzed hands , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[12]  Grigore C. Burdea,et al.  The Rutgers Master II-new design force-feedback glove , 2002 .

[13]  J. Leigh,et al.  Scientists in wonderland: A report on visualization applications in the CAVE virtual reality environment , 1993, Proceedings of 1993 IEEE Research Properties in Virtual Reality Symposium.