CFD modelling of liquid–liquid multiphase microstructured reactor: Slug flow generation

Microreactor technology, an important method of process intensification, offers numerous potential benefits for the process industries. Fluid–fluid reactions with mass transfer limitations have already been advantageously carried out in small-scale geometries. In liquid–liquid microstructured reactors (MSR), alternating uniform slugs of the twophase reaction mixture exhibit well-defined interfacial mass transfer areas and flow patterns. The improved control of highly exothermic and hazardous reactions is also of technical relevance for large-scale production reactors. Two basic mass transfer mechanisms arise: convection within the individual liquid slugs and diffusion between adjacent slugs. The slug size in liquid–liquid MSR defines the interfacial area available for mass transfer and thus the performance of the reactor. There are two possibilities in a slug flow MSR depending on the interaction of the liquids with the solid wall material: a dispersed phase flow in the form of an enclosed slug in the continuous phase (with film—complete wetting of the continuous phase) and an alternate flow of two liquids (without film—partial wetting of the continuous phase). In the present work, a computational fluid dynamics (CFD) methodology is developed to simulate the slug flow in the MSR for both types of flow systems. The results were validated with the experimental results of Tice et al. (J.D. Tice, A.D. Lyon and R.F. Ismagilov, Effects of viscosity on droplet formation and mixing in microfluidic channels, Analytica Chimica Acta 507 (1) (2004), pp. 73–77.).

[1]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[2]  D. Bothe,et al.  VOF-Simulations of Mass Transfer From Single Bubbles and Bubble Chains Rising in Aqueous Solutions , 2003 .

[3]  M. N. Kashid,et al.  Experimental and modelling studies on liquid-liquid slug flow capillary microreactors , 2008 .

[4]  R. Ismagilov,et al.  Effects of viscosity on droplet formation and mixing in microfluidic channels , 2004 .

[5]  D. Agar,et al.  Computational modelling of slug flow in a capillary microreactor , 2007 .

[6]  Jie Li,et al.  Numerical Study of Flows of Two Immiscible Liquids at Low Reynolds Number , 2000, SIAM Rev..

[7]  Adeniyi Lawal,et al.  Numerical study on gas and liquid slugs for Taylor flow in a T-junction microchannel , 2006 .

[8]  George M. Whitesides,et al.  Erratum: Formation of droplets and bubbles in a microfluidic T-junction - Scaling and mechanism of break-up (Lab on a Chip-Miniaturisation for Chemistry and Biology (2006) 6 (437) DOI: 10.1039/b510841a) , 2006 .

[9]  Yannick Hoarau,et al.  Slug flow in curved microreactors: Hydrodynamic study , 2007 .

[10]  David Quéré,et al.  Liquid trains in a tube , 2000 .

[11]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[12]  David F. Fletcher,et al.  On the CFD modelling of Taylor flow in microchannels , 2009 .

[13]  Albert Renken,et al.  Liquid-liquid two-phase flow patterns and mass transfer characteristics in rectangular glass microreactors , 2008 .

[14]  J. Burns,et al.  Development of a Microreactor for Chemical Production , 1999 .

[15]  Stojan Petelin,et al.  Coupling of the interface tracking and the two-fluid models for the simulation of incompressible two-phase flow , 2001 .

[16]  Yuguo Li,et al.  A numerical method for two-phase flows with an interface , 1998 .

[17]  Jam Hans Kuipers,et al.  Numerical simulation of behavior of gas bubbles using a 3‐D front‐tracking method , 2006 .

[18]  G. Whitesides,et al.  Formation of droplets and bubbles in a microfluidic T-junction-scaling and mechanism of break-up. , 2006, Lab on a chip.

[19]  D. Agar,et al.  The capillary-microreactor: a new reactor concept for the intensification of heat and mass transfer in liquid–liquid reactions , 2003 .

[20]  Yuchao Zhao,et al.  Liquid-liquid two-phase mass transfer in the T-junction microchannels , 2007 .

[21]  Helen Song,et al.  Formation of droplets and mixing in multiphase microfluidics at low values of the Reynolds and the capillary numbers , 2003 .

[22]  D. Agar,et al.  CFD modelling of mass transfer with and without chemical reaction in the liquid–liquid slug flow microreactor , 2007 .