A Novel Single-Input Dual-Output Three-Level DC–DC Converter

This paper proposes a novel nonisolated single-input dual-output three-level dc–dc converter (SIDO-TLC) appropriate for medium- and high-voltage applications. The SIDO-TLC is an integration of the three-level buck and boost converters, whose output voltages are regulated simultaneously. Reducing voltage stress across semiconductor devices, improving efficiency, and reducing inductors size are among the main merits of the new topology. Moreover, due to the considerably reduced volume of the step-down filter capacitor, a small film capacitor can be used instead, whose advantages are lower equivalent series resistance and a longer lifespan. A closed-loop control system has been designed based on a small-signal model derivation in order to regulate the output voltages along with the capacitors’ voltage balancing. In order to verify the theoretical and simulation results, a 300-W prototype was built and experimented. The results prove the aforementioned advantages of the SIDO-TLC, and the high effectiveness of the balancing control strategy. Furthermore, the converter shows very good stability, even under simultaneous step changes of the loads and input voltage.

[1]  R. W. De Doncker,et al.  Characterization and Comparison of High Blocking Voltage IGBTs and IEGTs Under Hard- and Soft-Switching Conditions , 2008 .

[2]  Philippe Delarue,et al.  A Bidirectional Three-Level DC–DC Converter for the Ultracapacitor Applications , 2010, IEEE Transactions on Industrial Electronics.

[3]  Nandyala SreeramulaReddy,et al.  A novel sepic based dual output DC-DC converter for solar applications , 2014, 2014 POWER AND ENERGY SYSTEMS: TOWARDS SUSTAINABLE ENERGY.

[4]  Yong Kang,et al.  A Fully Regulated Dual-Output DC–DC Converter With Special-Connected Two Transformers (SCTTs) Cell and Complementary Pulsewidth Modulation–PFM (CPWM-PFM) , 2010, IEEE Transactions on Power Electronics.

[5]  Peng Xu,et al.  A novel high efficiency high power density three-port converter based on interleaved half-bridge converter for renewable energy applications , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[6]  Benfei Wang,et al.  Model Predictive Voltage Control for Single-Inductor Multiple-Output DC–DC Converter With Reduced Cross Regulation , 2016, IEEE Transactions on Industrial Electronics.

[7]  Ivo Barbi,et al.  Multilevel Buck/Boost-Type DC–DC Converter for High-Power and High-Voltage Application , 2014, IEEE Transactions on Industry Applications.

[8]  Alireza Khaligh,et al.  Comparative Analysis of Bidirectional Three-Level DC–DC Converter for Automotive Applications , 2015, IEEE Transactions on Industrial Electronics.

[9]  Milan M. Jovanovic,et al.  Single-phase three-level boost power factor correction converter , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[10]  Xinbo Ruan,et al.  Synthesis of Multiple-Input DC/DC Converters , 2010, IEEE Transactions on Power Electronics.

[11]  Peter W. Lehn,et al.  A Bidirectional Multiple-Input Multiple-Output Modular Multilevel DC–DC Converter and its Control Design , 2016, IEEE Transactions on Power Electronics.

[12]  Firuz Zare,et al.  Multi-output DC-DC converters based on diode-clamped converters configuration: Topology and control strategy , 2010 .

[13]  Xinbo Ruan,et al.  Three-Level Bidirectional Converter for Fuel-Cell/Battery Hybrid Power System , 2010, IEEE Transactions on Industrial Electronics.

[14]  Junjun Zhang,et al.  A Family of Multiport Buck–Boost Converters Based on DC-Link-Inductors (DLIs) , 2015, IEEE Transactions on Power Electronics.

[15]  Haibing Hu,et al.  Multiport Converters Based on Integration of Full-Bridge and Bidirectional DC–DC Topologies for Renewable Generation Systems , 2014, IEEE Transactions on Industrial Electronics.

[16]  Avinash Joshi,et al.  Integrated Dual-Output Converter , 2015, IEEE Transactions on Industrial Electronics.

[17]  Euzeli C. dos Santos,et al.  Dual-output dc-dc buck converters with bidirectional and unidirectional characteristics , 2013 .

[18]  Bilal Akin,et al.  A new multi-input three-level integrated DC/DC converter for renewable energy systems , 2015, 2015 IEEE Applied Power Electronics Conference and Exposition (APEC).

[19]  Issa Batarseh,et al.  An Integrated Four-Port DC/DC Converter for Renewable Energy Applications , 2010, IEEE Transactions on Power Electronics.

[20]  Rong-Jong Wai,et al.  High-Efficiency Single-Input Multiple-Output DC–DC Converter , 2013, IEEE Transactions on Power Electronics.