论文信息 - Flying height-attitude observation and investigation of sliders in load/unload process

Flying height-attitude observation and investigation of sliders in load/unload process

A novel flying height-attitude testing system was developed based on white-light interferometry. Flying heights at three desired locations on the slider surface can be determined simultaneously with this system and, thus, slider attitude can be fully determined from the measurement results. Load and unload processes were systematically studied with this system and some details were revealed.

[1] Yong Hu. Ramp-Load Dynamics of Proximity Recording Air Bearing Sliders in Magnetic Hard Disk Drive , 1999 .

[2] David B. Bogy,et al. A Simplified 4-DOF Suspension Model for Dynamic Load/Unload Simulation and Its Application , 2000 .

[3] Frank E. Talke,et al. Load/unload measurements using laser doppler vibrometry and acoustic emission , 2000 .

[4] David B. Bogy,et al. Air Bearing Force Measurement of Pico Negative Pressure Sliders During Dynamic Unload , 2000 .

[5] Hidekazu Kohira,et al. Effect of air-bearing design on slider dynamics during unloading process , 2001 .

[6] David B. Bogy,et al. Design and operating conditions for reliable load/unload systems , 2000 .

[7] D. Bogy,et al. Effects of certain design parameters on load/unload performance [disk drives] , 2000 .

[8] Wei Hua,et al. Further studies of unload process with a 9D model , 2001 .