Recovery of copper from PVC multiwire cable waste by steam gasification.

Screened multiwire, PVC insulated tinned copper cable was gasified with steam at high temperature (HTSG) under atmospheric pressure for recovery of cooper. Gases from the process were additionally equilibrated at 850°C on the bed of calcined clay granules and more than 98% of C+H content in the cable was transformed to non-condensing species. Granules prepared from local clay were generally resistant for chlorination, there was also almost no deposition of metals, Cu and Sn, on the catalytic bed. It was found that 28% of chlorine reacted to form CaCl2, 71% was retained in aqueous condensate and only 0.6% was absorbed in alkaline scrubber. More than 99% of calcium existed in the process solid residue as a mixture of calcium chloride and calcium oxide/hydroxide. PVC and other hydrocarbon constituents were completely removed from the cable sample. Copper was preserved in original form and volatilization of copper species appeared insignificant. Tin was alloying with copper and its volatilization was less than 1%. Fractionation and speciation of metals, chlorine and calcium were discussed on the basis of equilibrium model calculated with HSC Chemistry software. High temperature steam gasification prevents direct use of the air and steam/water is in the process simultaneously gaseous carrier and reagent, which may be recycled together with hydrocarbon condensates.

[1]  A. Zabaniotou,et al.  Sustainable valorization of plastic wastes for energy with environmental safety via High-Temperature Pyrolysis (HTP) and High-Temperature Steam Gasification (HTSG). , 2009, Journal of hazardous materials.

[2]  Lifeng Zhang,et al.  Metallurgical recovery of metals from electronic waste: a review. , 2008, Journal of hazardous materials.

[3]  E. Sadiku,et al.  Thermal stabilizers for poly(vinyl chloride): A review , 2011 .

[4]  Liu Ying,et al.  Recycling Electrically-conductive Metal and Insulating Material from Cable Waste by Ultrasonic , 2011, 2011 Third International Conference on Measuring Technology and Mechatronics Automation.

[5]  Tiziano Faravelli,et al.  Thermal degradation of poly(vinyl chloride) , 2003 .

[6]  Mishene Christie Pinheiro Bezerra de Araújo,et al.  Electronic scraps--recovering of valuable materials from parallel wire cables. , 2008, Waste management.

[7]  I. Marco,et al.  Pyrolysis of electrical and electronic wastes , 2008 .

[8]  S. G. Patrick,et al.  Practical Guide to Polyvinyl Chloride , 2008 .

[9]  Xuguang Jiang,et al.  TG-FTIR analysis of PVC thermal degradation and HCl removal , 2008 .

[10]  H. Bockhorn,et al.  The effect of some fillers on PVC degradation , 2006 .

[11]  Xiu-li Yin,et al.  Utilization of porous dolomite pellets for the catalytic decomposition of acetic acid , 2010 .

[12]  H. Flandorfer,et al.  The Cu-Sn phase diagram, Part I: New experimental results. , 2017, Intermetallics.

[13]  Guido Grause,et al.  Metal recovery from wire scrap via a chloride volatilization process: Poly(vinyl chloride) derived chlorine as volatilization agent , 2013 .

[14]  J.M.N. van Kasteren,et al.  Design of a process for steam gasification of PVC waste , 2000 .

[15]  Bernd Bilitewski,et al.  Global Risk-Based Management of Chemical Additives II , 2012 .

[16]  Zhenming Xu,et al.  Recycling of non-metallic fractions from waste electrical and electronic equipment (WEEE): a review. , 2014, Waste management.

[17]  M. Zabłocka-Malicka,et al.  Gasification of RAM memory waste , 2011 .

[18]  Rafael Font,et al.  Decomposition of two types of electric wires considering the effect of the metal in the production of pollutants. , 2013, Chemosphere.

[19]  Paul T. Williams,et al.  Pyrolysis–gasification of post-consumer municipal solid plastic waste for hydrogen production , 2010 .

[20]  Otto Hutzinger,et al.  Handbook of environmental chemistry , 1980 .

[21]  Sea Cheon Oh,et al.  Dehydrochlorination characteristics of waste PVC wires by thermal decomposition , 2009 .