Performance evaluation of a six-axis generalized force-reflecting teleoperator

Recent work in real-time distributed computation and control has culminated in a prototype force-reflecting telemanipulation system having dissimilar master (cable-driven force-reflecting hand controller) and slave (PUMA 560 robot with custom controller), extremely high sampling rate (1000 Hz), and low loop computation delay (5 ms). In a series of experiments with this system and five trained test operators covering more than 100 h of teleoperation, performance in a series of generic and application-driven tasks with and without force feedback was measured, and with control shared between teleoperation and local sensor referenced control. Measurements defining task performance include 100-Hz recording of six-axis force-torque information, task completion time, and visual observation of predefined task errors. It is shown that all performance measures improved as capability was added along a spectrum of capabilities ranging from pure position control through force-reflecting teleoperation and shared control. Performance was maximal for the barehanded operator. >

[1]  Blake Hannaford,et al.  A design framework for teleoperators with kinesthetic feedback , 1989, IEEE Trans. Robotics Autom..

[2]  A. K. Bejczy,et al.  Experimental results with a six-degree-of-freedom force-reflecting hand controller , 1981 .

[3]  D. A. Kugath.  Experiments evaluating compliance and force feedback effect on manipulator performance , 1972 .

[4]  A. K. Bejczy,et al.  Force-reflective teleoperated system with shared and compliant control capabilities , 1989 .

[5]  P. Fiorini.  A versatile hand for manipulators , 1988, IEEE Control Systems Magazine.

[6]  J. W. Hill.  Study of modeling and evaluation of remote manipulation tasks with force feedback , 1979 .

[7]  B. S. Weil,et al.  Effects of force reflection on servomanipulator task performance , 1986 .

[8]  B. Hannaford,et al.  Hidden Markov Model of Force Torque Information in Telemanipulation , 1991 .

[9]  R. C. Goertz,et al.  ELECTRONICALLY CONTROLLED MANIPULATOR , 1954 .

[10]  Blake Hannaford,et al.  Experimental and simulation studies of hard contact in force reflecting teleoperation , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[11]  G. Jagannath Raju,et al.  Operator adjustable impedance in bilateral remote manipulation , 1988 .

[12]  Blake Hannaford,et al.  Task-level testing of the JPL-OMV smart end effector , 1987 .

[13]  Blake Hannaford,et al.  Hidden Markov Model Analysis of Force/Torque Information in Telemanipulation , 1991, Int. J. Robotics Res..

[14]  John J. Craig,et al.  Hybrid position/force control of manipulators , 1981 .

[15]  Antal K. Bejczy,et al.  Universal computer control systems (UCCS) for space telerobots , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[16]  D. E. Whitney,et al.  Historical Perspective and State of the Art in Robot Force Control , 1987 .